Items where Institution is :Other partners > Turbomeca (FRANCE)

Delebarre, Corentin and Wagner, Vincent and Paris, Jean-Yves and Dessein, Gilles and Denape, Jean and Gurt-Santanach, Julien The wear mechanisms occurring in a labyrinth seal/abradable contact depending on the incursion depth parameter. (2016) Mechanics & Industry, 17 (6). 601-620. ISSN 2257-7777

Livebardon, Thomas and Moreau, Stéphane and Gicquel, Laurent Y.M. and Poinsot, Thierry and Bouty, Eric Combining LES of combustion chamber and an actuator disk theory to predict combustion noise in a helicopter engine. (2016) Combustion and Flame, 165. 272-287. ISSN 0010-2180

Perrais, Maxime and Seror, Alexandre and Burteau, A. and Andrieu, Eric and Poquillon, Dominique Strain rate and oxidation effects on crack initiation at 600 and 650 °C in a nickel-based superalloy. (2016) Materials at High Temperatures, 33 (3). 241-247. ISSN 0960-3409

Delebarre, Corentin and Wagner, Vincent and Paris, Jean-Yves and Dessein, Gilles and Denape, Jean and Gurt Santanach, Julien Etude expérimentale des mécanismes d’usure intervenant lors d’un contact entre un joint d’étanchéité de type labyrinthe et un matériau abradable en application dans les turbomachines. (2015) In: Journées Internationales Francophones de Tribologie, 27 May 2015 - 29 May 2015 (Nantes, France).

Delebarre, Corentin and Wagner, Vincent and Paris, Jean-Yves and Dessein, Gilles and Denape, Jean and Gurt Santanach, Julien An experimental study of the high speed interaction between a labyrinth seal and an abradable coating in a turbo-engine application. (2014) Wear, 316 (1-2). 109-118. ISSN 0043-1648

Koupper, Charlie and Poinsot, Thierry and Gicquel, Laurent Y.M. and Duchaine, Florent Compatibility of Characteristic Boundary Conditions with Radial Equilibrium in Turbomachinery Simulations. (2014) AIAA Journal, 52 (12). 2829-2839. ISSN 0001-1452

Mandrile, Sébastien and Cazenave-Larroche, Gilles and Vernault, Cyril and Dessein, Gilles and Denape, Jean and Paris, Jean-Yves Development of an in-house cutting forces simulation for fir tree broaching process. (2014) International Journal of Machining and Machinability of Materials, 15 (1/2). 18-35. ISSN 1748-5711

Goti, Raphaël and Bétaille-Francoual, Marie and Hourcastagné, Elodie and Viguier, Bernard and Crabos, Fabrice Isothermal Oxidation Behaviour of NiCoCrAlYTa Coatings Produced by HVOF Spraying and Tribomet™ Process. (2013) Oxidation of Metals, 81 (1-2). 105-113. ISSN 0030-770X

Vande Put, Aurélie and Oquab, Djar and Péré, Eve and Raffaitin, Aymeric and Monceau, Daniel Beneficial Effect of Pt and of Pre-Oxidation on the Oxidation Behaviour of an NiCoCrAlYTa Bond-Coating for Thermal Barrier Coating Systems. (2011) Oxidation of Metals, 75 (5-6). 247-279. ISSN 0030-770X

Popa, Andreï and Dutilh, Vincent and Baili, Maher and Dessein, Gilles and Perrin, Géraldine Identification of influent factors on surface integrity in nickel-base superalloy drilling. (2010) In: 19th International Conference on Manufacturing Systems - ICMaS 2010, 11 November 2010 - 12 November 2010 (Bucharest, Romania).

Vande Put, Aurélie and Lafont, Marie-Christine and Oquab, Djar and Raffaitin, Aymeric and Monceau, Daniel Effect of modification by Pt and manufacturing processes on the microstructure of two NiCoCrAlYTa bond coatings intended for thermal barrier system applications. (2010) Surface and Coatings Technology, 205 (3). 717-727. ISSN 0257-8972

Dutilh, Vincent and Popa, Andreï and Dessein, Gilles and Alexis, Joël and Perrin, Géraldine Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy. (2010) In: CIRP ICME ’10 - 7th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING, 23 June 2010 - 25 June 2010 (Capri, Italy). (Unpublished)

Adeline, Romain and Darfeuil, Pierre and Humbert, Sophie and Cardoso, Janette and Seguin, Christel Toward a methodology for the AltaRica modelling of multi-physical systems. (2010) In: European Conference on Safety and Reliability - ESREL 2010, 05-09 Sept 2010, Rhodes, Greece .

Adeline, Romain and Cardoso, Janette and Darfeuil, Pierre and Humbert, Sophie and Seguin, Christel Toward a validation process for model based safety analysis. (2010) In: ERTS² 2010 - Embedded Real Time Software and Systems, 19 May 2010 - 21 May 2010 (Toulouse, France).

Touratier, Fabienne and Andrieu, Eric and Poquillon, Dominique and Viguier, Bernard Rafting microstructure during creep of the MC2 nickel-based superalloy at very high temperature. (2009) Materials Science and Engineering A, 510-511. 244-249. ISSN 0921-5093

Raffaitin, Aymeric and Monceau, Daniel and Crabos, Fabrice and Andrieu, Eric The effect of thermal cycling on the high-temperature creep behaviour of a single crystal nickel-based superalloy. (2007) Scripta Materialia, 5 (4). 277-280. ISSN 1359-6462

Raffaitin, Aymeric and Crabos, Fabrice and Andrieu, Eric and Monceau, Daniel Advanced burner-rig test for oxidation-corrosion resistance evaluation of MCrAlY/superalloys systems. (2006) Surface and Coatings Technology, 2 (7). 3829-3835. ISSN 0257-8972

San Juan, Jose and Nó, Maria Luisa and Lacaze, Jacques and Viguier, Bernard and Fournier, Dominique Internal friction in advanced Fe-Al intermetallics. (2006) Materials Science and Engineering A, 442 (1-2). 492-495. ISSN 0921-5093

Raffaitin, Aymeric and Monceau, Daniel and Andrieu, Eric and Crabos, Fabrice Cyclic oxidation of coated and uncoated single-crystal nickel-based superalloy MC2 analyzed by continuous thermogravimetry analysis. (2006) Acta Materialia, 54 (17). 4473-4487. ISSN 1359-6454

Viel, Sandrine and Coudert, Thierry and Geneste, Laurent Proposition d’une architecture composée de multiples processus de retour d’expérience coopérants. (2006) Revue Française de Génie Industriel, 25 (4). ISSN 0242-9780

Dryepondt, Sébastien and Monceau, Daniel and Crabos, Fabrice and Andrieu, Eric Static and dynamic aspects of coupling between creep behavior and oxidation on MC2 single crystal superalloy at 1150 °C. (2005) Acta Materialia, 5 (15). 4199-4209. ISSN 1359-6454

Béguin, Jean-Denis and Faure, Pierre and Adrian, Denise and Alexis, Joël and Petit, Jacques-Alain and Belaygue, Philippe and Fournier, Dominique Environmental protection of titanium alloys in centrifugal compressors at 500°C in saline atmosphere. (2004) Surface Engineering, 20 (2). 135-138. ISSN 0267-0844

Dryepondt, Sébastien and Andrieu, Eric and Monceau, Daniel and Crabos, Fabrice and Vernault, Cyril Influence of Environment on Creep Properties of MC2 Single Crystal Superalloy at 1150°C. (2004) Materials Science Forum, 461 - 4. 647-654. ISSN 0255-5476

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Gilles, Cazenave-Larroche Influence of material removal on dynamic behavior of thin walled structure in peripheral milling. (2004) In: 7th CIRP International Workshop on Modeling of Machining Operations, ENSAM Cluny, 4 May 2004 - 5 May 2004 (Cluny, France).