OATAO - Open Archive Toulouse Archive Ouverte Open Access Week

Predictive control of two synchronous machines in parallel supplied by a standard three phase static converter

Nguyen, Ngoc Linh. Predictive control of two synchronous machines in parallel supplied by a standard three phase static converter. PhD, Institut National Polytechnique de Toulouse, 2013

(Document in English)

PDF - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader

Official URL: http://ethesis.inp-toulouse.fr/archive/00002311/


Nowadays, embedded systems are more and more numerous that impacted strongly energy conversion systems. Associated constraints translates into a reduction of the masses and the losses to improve energy efficiency in the conversion chain. This is the case in the field of aeronautics or the concept of ″More Electric Aircraft″ now becomes a reality. Therefore, the permanent magnet synchronous machine becomes an actuator of excellence because of its important mass power, its low maintenance cost and its dynamic qualities. When these machines are associated to carry out cooperative functions (for example flight surfaces) can still reduce the mass embedded in pooling power electronics. It is precisely in this context that localizes our work by offering structures power electronics-based, reduced to power for two or more electric machines in parallel and providing control laws aimed at improving energy efficiency. We we are interested specifically in the Predictive Control of two Synchronous Machines connected in parallel with a 3-Phase Converter. These machines have identical characteristics and must follow a same velocity profile with a torque of different load and in any case independent. The predictive control approach leads us to consider the voltage inverter as a device having a finite number of input states and we need to select every moment the best control solution to minimize a cost function. This cost function on one or two machines, is composed of a portion which represents the quality of the produced torque (Iq current) and another party representative quality of the conversion via produced losses (Id current). This approach works naturally for variable switching frequency. Thus the document state of different solutions studied showing the limits of such an approach both dynamic in terms of losses. To improve this basic solution we develop an approach based on the use of virtual vector which increase the possibilities of control and led to operation at constant frequency through a SVM solution. The search for an optimum virtual vector is proposed and applied to a device consisting of two low-power machines. The various proposals are validated through numerical simulation and consolidated by experimental results.

Item Type:PhD Thesis
Uncontrolled Keywords:
Institution:Université de Toulouse > Institut National Polytechnique de Toulouse - Toulouse INP (FRANCE)
Laboratory name:
Research Director:
Fadel, Maurice and Llor, Ana Maria
Deposited On:22 Oct 2013 21:58

Repository Staff Only: item control page