Birro, Thiago and Paroissien, Eric
and Aufray, Maëlenn
and Lachaud, Frédéric
A methodology based on the coupled criterion for the assessment of adhesive-to-adherend interface crack initiation.
(2020)
International Journal of Adhesion and Adhesives, 102. 102664-102676. ISSN 0143-7496
|
(Document in English)
PDF (Author's version) - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader 1MB |
Official URL: https://doi.org/10.1016/j.ijadhadh.2020.102664
Abstract
In the framework of lightweight structures, the bonded joints appear as a suitable solution for increasing the mass-to-strength ratio. However, the full understanding of the interface debonding is a key obstacle to be overcome in critical systems. For characterizing adhesive-to-adherend interface crack initiation, the three-point bending test has been shown as a useful test that provides an identifiable small round zone. The samples were manufactured using an aluminum alloy 2024-T3 etched with nitric acid. The adhesive consisted in an epoxy pre-polymer DGEBA, DETA amine and an organosilane GLYMO directly introduced in the mixture. A coupled stress and energy criterion was used for the assessment of the properties of the interfacial debonding, since a stress concentration appears near to the corner of the specimen. For a quick computation, the application of the coupled criterion (CC) used the macro-element technique. On the other hand, most finite–element-based software has already implemented the cohesive zone modeling (CZM). In this sense, the fracture parameters computed via CC were used for the assessment of cohesive zone modeling of adhesive-to-adherend interface crack initiation. The results of fracture initiation using the CZM showed a good agreement in a macroscale response with the experimental campaign, thus providing a useful tool for a rapid estimation of cracking initiation.
Item Type: | Article |
---|---|
HAL Id: | hal-02877747 |
Audience (journal): | International peer-reviewed journal |
Uncontrolled Keywords: | |
Institution: | French research institutions > Centre National de la Recherche Scientifique - CNRS (FRANCE) Université de Toulouse > Ecole nationale supérieure des Mines d'Albi-Carmaux - IMT Mines Albi (FRANCE) Université de Toulouse > Institut National Polytechnique de Toulouse - Toulouse INP (FRANCE) Université de Toulouse > Institut National des Sciences Appliquées de Toulouse - INSA (FRANCE) Université de Toulouse > Institut Supérieur de l'Aéronautique et de l'Espace - ISAE-SUPAERO (FRANCE) Université de Toulouse > Université Toulouse III - Paul Sabatier - UT3 (FRANCE) |
Laboratory name: | |
Funders: | Région Occitanie - Université Fédérale Toulouse Midi-Pyrénées |
Statistics: | download |
Deposited On: | 22 Jun 2020 14:20 |
Repository Staff Only: item control page