OATAO - Open Archive Toulouse Archive Ouverte Open Access Week

Contribution for analysing the intra-ply yarn sliding mechanism in preforming of the woven

labanieh, Amad and Garnier, Christian and Ouagne, Pierre and Dalverny, Olivier and Soulat, Damien Contribution for analysing the intra-ply yarn sliding mechanism in preforming of the woven. (2018) In: Autex 2018 World Textile conference, 20 June 2018 - 22 June 2018 (Istanbul, Turkey).

[img]
Preview
(Document in English)

PDF (Author's version) - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader
396kB

Official URL: https://www.sciencedirect.com/science/article/pii/S1359835X18300186

Abstract

Manufacturing complex composite part via Liquid Composite Molding (LCM) processes involves preforming dry textile perform before injecting the liquid resin. The defect that may be encountered within the textile structure during preforming step decreases the expected mechanical properties of the composite part. The intra-ply yarn sliding is a defect frequently observed during preforming of a woven preform but its mechanism is far from being fully understood. In this paper, a contribution for analyzing the mechanism of this defect and the influencing process parameters is presented. This analysis is based on an experimental study performed for one ply carbon fabric using a hemispheric punch. The effect of the ply orientation and blank holder force on the fabric behavior during preforming is evaluated regarding the required preforming force and yarn slippage. For the performed tests, it was obvious the impact of these two factors on the fabric behavior. The slippage phenomenon occurred in zones with low shear angles, for specific ply orientation. The fabric behavior has been analyzed by considering the evolution of the yarn tension which is related to the contact shear stress induced by sliding the fabric across the die and blank holder during preforming. Using an analytical model for the yarn tension in friction sliding, the influencing ply geometry and process parameters have been identified. Based on this analysis a solution relative the ply geometry to reduce the yarn tension is examined.

Item Type:Conference or Workshop Item (Paper)
HAL Id:hal-02359824
Audience (conference):International conference proceedings
Uncontrolled Keywords:
Institution:Université de Toulouse > Institut National Polytechnique de Toulouse - Toulouse INP (FRANCE)
Other partners > Ecole Nationale Supérieure des Arts et Industries Textiles - ENSAIT (FRANCE)
Laboratory name:
Statistics:download
Deposited On:05 Apr 2019 10:09

Repository Staff Only: item control page