OATAO - Open Archive Toulouse Archive Ouverte Open Access Week

Chromium carbide growth at low temperature by a highly efficient DLI-MOCVD process in effluent recycling mode

Michau, Alexandre and Maury, Francis and Schuster, Frédéric and Boichot, Raphaël and Pons, Michel and Monsifrot, Eric Chromium carbide growth at low temperature by a highly efficient DLI-MOCVD process in effluent recycling mode. (2017) Surface and Coatings Technology, 332. 96-104. ISSN 0257-8972

(Document in English)

PDF (Author's version) - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader

Official URL: http://dx.doi.org/10.1016/j.surfcoat.2017.06.077


The effect of direct recycling of effluents on the quality of CrxCy coatings grown by MOCVD using direct liquid injection (DLI) of bis(ethylbenzene)chromium(0) in toluene was investigated. The results are compared with those obtained using non-recycled solutions of precursor. Both types of coatings exhibit the same features. They are amorphous in the temperature range 673–823 K. They exhibit a dense and glassy-like microstructure and a high hardness (> 23 GPa). Analyses at the nanoscale revealed a nanocomposite microstructure consisting of free-C domains embedded in an amorphous Cr7C3 matrix characterized by strong interfaces and leading to an overall composition slightly higher than Cr7C3. The stiffness and strength of these interfaces are mainly due to at least two types of chemical bonds between Cr atoms and free-C: (i) Cr intercalation between graphene sheets and(ii) hexahapto η6-Cr bonding on the external graphene sheets of the free-C domains. The density of these interactions was found increasing by decreasing the concentration of the injected solution, as this occurred using a recycled solution. As a result, “recycled” coatings exhibit a higher nanohardness (29 GPa) than “new” coatings (23 GPa). This work demonstrates that using bis(arene)M(0) precursors, direct recycling of effluents is an efficient route to improve the conversion yield of DLI-MOCVD process making it cost-effective and competitive to produce protective carbide coatings of transition metals which share the same metal zero chemistry.

Item Type:Article
Additional Information:Thanks to Elsevier editor. The definitive version is available at : https://www.sciencedirect.com/science/article/pii/S0257897217309155
HAL Id:hal-01677497
Audience (journal):International peer-reviewed journal
Uncontrolled Keywords:
Institution:French research institutions > Commissariat à l'Energie Atomique et aux énergies alternatives - CEA (FRANCE)
French research institutions > Centre National de la Recherche Scientifique - CNRS (FRANCE)
Université de Toulouse > Institut National Polytechnique de Toulouse - Toulouse INP (FRANCE)
Université de Toulouse > Université Toulouse III - Paul Sabatier - UT3 (FRANCE)
Other partners > Dephis (FRANCE)
Laboratory name:
Deposited On:13 Apr 2018 14:09

Repository Staff Only: item control page