OATAO - Open Archive Toulouse Archive Ouverte Open Access Week

Items where Person is "Dessein, Gilles"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 51.

Article

Wagner, Vincent and Baili, Maher and Dessein, Gilles The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting. (2014) International Journal of Advanced Manufacturing Technology . ISSN 0268-3768

Delebarre, Corentin and Wagner, Vincent and Paris, Jean-Yves and Dessein, Gilles and Denape, Jean and Gurt-Santanach, Julien An experimental study of the high speed interaction between a labyrinth seal and an abradable coating in a turbo-engine application. (2014) Wear, vol. 316 (n° 1-2). pp. 109-118. ISSN 0043-1648

Mandrile, Sébastien and Cazenave-Larroche, Gilles and Vernault, Cyril and Dessein, Gilles and Denape, Jean and Paris, Jean-Yves Development of an in-house cutting forces simulation for fir tree broaching process. (2014) International Journal of Machining and Machinability of Materials, vol. 15 (n° 1/2). pp. 18-35. ISSN 1748-5711

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles Influence of interpolation type in high-speed machining (HSM). (2014) The International Journal of Advanced Manufacturing Technology, vol. 72 (n° 1-4). pp. 289-302. ISSN 0268-3768

Gomez-gras, Giovanni and Travieso-Rodríguez, Jose Antonio and González-Rojas, Hernan Alberto and Napoles-Alberro, Amelia and Carrillo, Francisco and Dessein, Gilles Study of a ball-burnishing vibration-assisted process. (2013) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture . ISSN 0954-4054

Gassara, Bassem and Baili, Maher and Dessein, Gilles and Hbaieb, Moncef and Bouzid Saï, Wassila Feed rate modeling in circular–circular interpolation discontinuity for high-speed milling. (2013) The International Journal of Advanced Manufacturing Technology, vol. 65 (n° 9 -12). pp. 1619-1634. ISSN 0268-3768

Mousseigne, Michel and Landon, Yann and Seguy, Sébastien and Dessein, Gilles and Redonnet, Jean-Max Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory. (2013) International Journal of Machine Tools and Manufacture, vol. 65 . pp. 47-57. ISSN 0890-6955

Gassara, Bassem and Dessein, Gilles and Baili, Maher and Hbaieb, Moncef and Saï, Wassila Bouzid Analytical and experimental study of feed rate in high-speed milling. (2013) Machining Science and Technology, vol. 17 (n° 2). pp. 181-208. ISSN 1091-0344

Le Dref, John and Eyma, Florent and Dessein, Gilles and Denaud, Louis Etienne and Landon, Yann Comparative study of tools in drilling composites T700-M21 and T800-M21. (2013) Advanced Materials Research, vol. 698 . pp. 59-68. ISSN 1662-8985

Gassara, Bassem and Dessein, Gilles and Baili, Maher and Hbaieb, Moncef and Bouzid Saï, Wassila Kinematic behaviour modeling of the axes of a machining center in high speed milling. (2013) Advanced Materials Research, vol. 698 . pp. 39-48. ISSN 1022-6680

Smaoui, Moez and Bouaziz, Zoubeir and Zghal, Ali and Baili, Maher and Dessein, Gilles Compensation of a ball end tool trajectory in complex surface milling. (2012) International Journal of Machining and Machinability of Materials, vol. 11 (n° 1). pp. 51-68. ISSN 1748-5711

Senatore, Johanna and Segonds, Stéphane and Rubio, Walter and Dessein, Gilles Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones. (2012) Computer-Aided Design, vol. 44 (n° 12). pp. 1151-1160. ISSN 00104485

Popa, Andreï and Dessein, Gilles and Baili, Maher and Dutilh, Vincent Investigation of tool failure modes and machining disturbances using monitoring signals. (2012) Advanced Materials Research, vol. 423 . pp. 128-142. ISSN 1022-6680

Msaddek, El Bechir and Bouaziz, Zoubeir and Dessein, Gilles and Baili, Maher Optimization of pocket machining strategy in HSM. (2012) The International Journal of Advanced Manufacturing Technology, vol. 62 (n° 1-4). pp. 69-81. ISSN 0268-3768

Smaoui, Moez and Bouaziz, Zoubeir and Zghal, Ali and Dessein, Gilles and Baili, Maher Simulation of the deflected cutting tool trajectory in complex surface milling. (2011) The International Journal of Advanced Manufacturing Technology, vol. 56 (n° 5-8). pp. 463-474. ISSN 0268-3768

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles Modeling and simulation of high-speed milling centers dynamics. (2011) The International Journal of Advanced Manufacturing Technology, vol. 53 (n ° 9-12). pp. 877-888. ISSN 0268-3768

Baili, Maher and Wagner, Vincent and Dessein, Gilles and Sallabery , Julien and Lallement, Daniel An Experimental Investigation of Hot Machining with Induction to Improve Ti-5553 Machinability. (2011) Applied Mechanics and Materials, vol. 62 . pp. 67-76. ISSN 1660-9336

Gourc, Etienne and Seguy, Sébastien and Dessein, Gilles Dynamical modeling of spindle with active magnetic bearing for milling process. (2011) Advanced Materials Research, vol. 423 . pp. 200-209. ISSN 1662-8985

Wagner, Vincent and Baili, Maher and Dessein, Gilles and Lallement, Daniel Experimental study of coated carbide tools behaviour: application for Ti-5-5-5-3 turning. (2011) International Journal of Machining and Machinability of Materials, Vol.9 (n° 3/4). pp. 233-248. ISSN 1748-5711

Travieso-Rodríguez, Jose Antonio and Dessein, Gilles and González-Rojas, Hernan Alberto Improving the surface finish of concave and convex surfaces using a ball burnishing process. (2011) Materials and Manufacturing Processes, vol. 26 (n°12). pp. 1494-1502. ISSN 1042-6914

Seguy, Sébastien and Insperger, Tamás and Arnaud, Lionel and Dessein, Gilles and Peigné, Grégoire Suppression of period doubling chetter in high-speed milling by spindle speed variation. (2011) Machining Science and Technology, vol. 15 (n° 2). pp. 153-171. ISSN 1091-0344

Seguy, Sébastien and Insperger, Tamás and Arnaud, Lionel and Dessein, Gilles and Peigné, Grégoire On the stability of high-speed milling with spindle speed variation. (2010) The International Journal of Advanced Manufacturing Technology, vol. 48 (n° 9-12). pp. 883-895. ISSN 0268-3768

Wagner, Vincent and Baili, Maher and Dessein, Gilles and Lallement, Daniel Experimental characterization of behavior laws for titanium alloys: application to Ti5553. (2010) Key Engineering Materials, vol. 446 . pp. 147-155. ISSN 1662-9795

Dutilh, Vincent and Dessein, Gilles and Alexis, Joël and Perrin, Géraldine Links Between Machining Parameters and Surface Integrity in Drilling Ni-Superalloy. (2010) Advanced Materials Research, vol. 112 . pp. 171-178. ISSN 1662-8985

Seguy, Sébastien and Dessein, Gilles and Arnaud, Lionel Surface roughness variation of thin wall milling, related to modal interactions. (2008) International Journal of Machine Tools and Manufacture, vol. 48 (n° 3-4). pp. 261-274. ISSN 0890-6955

Seguy, Sébastien and Campa, Francisco Javier and López de Lacalle, Luis Norberto and Arnaud, Lionel and Dessein, Gilles and Aramendi, Gorka Toolpath dependent stability lobes for the milling of thin-walled parts. (2008) International journal of machining and machinability of materials, vol. 4 (n° 4). pp. 377-392. ISSN 1748-5711

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Cazenave-Larroche, Gilles Integration of dynamic behaviour variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling. (2006) The International Journal of Advanced Manufacturing Technology, vol. 27 (n ° 7-8). pp. 638-644. ISSN 0268-3768

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Cazenave-Larroche, Gilles Influence of material removal on the dynamic behavior of thin-walled structures in peripheral milling. (2006) Machining Science and Technology, vol. 10 (n° 3). pp. 275-287. ISSN 1091-0344

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Cazenave-Larroche, Gilles Influence de la position de l'outil sur le comportement dynamique en fraisage de parois minces. (2005) Mécanique & Industries, vol. 6 (n°4). pp. 403-410. ISSN 1296-2139

Conference or Workshop Item

Travieso-Rodríguez, Jose Antonio and González-Rojas, Hernan Alberto and Gomez-gras, Giovanni and Dessein, Gilles and Alexis, Joël Ball-burnishing process influence on hardness ans residual stresses of aluminium A92017. (2013) In: 17th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology, 10 September 2013 - 11 September 2013 (Istanbul, Turkey).

Wehbe, Toufic and Arnaud, Lionel and Dessein, Gilles Faisabilité de la mesure de champs par stéréo corrélation d’images en conditions restrictives. Application aux vibrations de pièces minces en Usinage Grande Vitesse Anglais : Analyzing feasibility of field measurement by digital image stereo correlation to flexible workpiece vibrations during high speed machining. (2013) In: 19th LAAS Internation Science Conference, 5 April 2013 - 6 April 2013 (Beirut, Lebanon).

Gassara, Bassem and Dessein, Gilles and Baili, Maher and Hbaieb, Moncef and Bouzid Saï, Wassila Modélisation du comportement cinématique des axes d'un centre d'usinage en fraisage à grande vitesse. (2012) In: 4th International Symposium on Aircraft Materials, 09-12 May 2012, Fez, Morocco .

Popa, Andreï and Baili, Maher and Dessein, Gilles and Dutilh, Vincent Identification of tool failure modes in drilling Udimet® 720 superalloy. (2011) In: International conference on structural analysis of advanced materials (ICSAAM2011), 7 September 2011 - 10 September 2011 (Sinaia, Romania).

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles Modeling and simulation of high speed milling centers dynamics. (2010) In: 5th International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM2010), 18-20 Dec 2010, Hammamet, Tunisia .

Popa, Andreï and Dutilh, Vincent and Baili, Maher and Dessein, Gilles and Perrin, Géraldine Identification of influent factors on surface integrity in nickel-base superalloy drilling. (2010) In: 19th International Conference on Manufacturing Systems - ICMaS 2010, 11 November 2010 - 12 November 2010 (Bucharest, Romania).

Dutilh, Vincent and Popa, Andreï and Dessein, Gilles and Alexis, Joël and Perrin, Géraldine Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy. (2010) In: CIRP ICME ’10 - 7th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING, 23 June 2010 - 25 June 2010 (Capri, Italy). (Unpublished)

Baili, Maher and Wagner, Vincent and Dessein, Gilles and Sallabery, Julien and Lallement, Daniel Influence de la température sur l’usinabilité du Ti-5-5-5-3. (2010) In: International Symposium on Aircraft Materials, 12 May 2010 - 14 May 2010 (Marrakech, Morocco).

Seguy, Sébastien and Dessein, Gilles and Arnaud, Lionel and Insperger, Tamás Chatter Control by Spindle Speed Variation in High-Speed Milling. (2010) In: ICSAAM 2009, 7-10 Sept 2009, Tarbes, France .

Wagner, Vincent and Baili, Maher and Dessein, Gilles and Lallement, Daniel Behaviour laws comparison for titanium alloys machining: Application to Ti5553. (2009) In: International conference on structural analysis of advanced materials, 7 September 2009 - 10 September 2009 (Tarbes, France).

Arnaud, Lionel and Duthil, Vincent and Dessein, Gilles and Saussol, Antoine and Arnaud, Michel Analyse et réduction des vibrations d'usinage d'une pièce automobile produite en grande série. (2008) In: XVIème Colloque Vibrations, Chocs & Bruit, 10-12 juin, 2008, Lyon, France .

Wehbe, Toufic and Dessein, Gilles and Arnaud, Lionel Etude expérimentale du comportement vibratoire d'une pièce mince en usinage. (2008) In: 5ème Assises Machines et Usinage à Grande Vitesse - Assises MUGV 2008, 5-6 June 2008, Nantes, France .

Wehbe, Toufic and Dessein, Gilles and Arnaud, Lionel Experimental study of thin part vibration modes in machining. (2008) In: 17th International Conference on Manufacturing Systems – ICMaS, 13-14 Nov 2008, Bucharest, Romania .

Seguy, Sébastien and Arnaud, Lionel and Dessein, Gilles and Insperger, Tamás and Peigné, Grégoire Influence d'une vitesse de rotation variable sur les vibrations d'usinage en UGV. (2008) In: 5ème Assises Machines et Usinage à Grande Vitesse - Assises MUGV 2008, 5-6 June 2008, Nantes, France .

Arnaud, Lionel and Dutilh, Vincent and Dessein, Gilles and Insperger, Tamás Vibrations d'usinage en tournage intérieur fortement interrompu, d'une pièce produite en grande série. (2008) In: 5ème Assises Machines et Usinage à Grande Vitesse - Assises MUGV 2008, 5-6 June 2008, Nantes, France .

Fazzini, Marina and Wehbe, Toufic and Dessein, Gilles and Arnaud, Lionel and Seguy, Sébastien Stéréo-corrélation d'image : application aux vibrations d'une paroi mince en usinage. (2007) In: Colloque méthodes et techniques optiques pour l'industrie, CMOI, 19-23 Nov 2007, Arcachon, France .

Campa, Francisco Javier and López de Lacalle, Luis Norberto and Aramendi, Gorka and Seguy, Sébastien and Arnaud, Lionel and Dessein, Gilles and Herranz, Sergio Fresado de estructuras de rigidez reducida utilizando un modelo de estabilidad en el dominio de la frecuencia. (2006) In: XVI Congreso de Maquinas Herramienta y Tecnologias de Fabricacion, 18-20 Octobre 2006, San Sebastian, 18 October 2006 - 20 October 2006 (San Sebastian, Spain). (Unpublished)

Campa, Francisco Javier and López de Lacalle, Luis Norberto and Herranz, Sergio and Arnaud, Lionel and Ukar, E. and Dessein, Gilles Optimización del fresado de piezas de rigidez reducida mediante un modelo de estabilidad tridimensional. (2005) In: 7º Congreso iberoamericano de ingenieria mecanica - 2005, 12-14 Oct 2005, Mexico .

Arnaud, Lionel and Dessein, Gilles Application de la théorie des lobes de stabilité au fraisage de parois minces. (2002) In: 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering - IDMME 2002, 14-16 May 2002, Clermont-Ferrand, France . (Unpublished)

Desforges, Xavier and Habbadi, Abdallah and Dessein, Gilles Contribution to Multiagent Machine tool Control: Intelligent Sensors for Feeddrive Monitoring. (2001) In: Mechatronics 2000, 1st IFAC Conference on Mechatronic Systems, 18-20 Sept 2000, Darmstadt, Germany .

Book Section

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles Simulation Tool of the HSM machine dynamic behavior. (2011) In: Milling: Operations, Applications and Industrial Effects. Nova Science Publishers, pp. 209-228. ISBN 978-1-61470-903-9

Arnaud, Lionel and Dessein, Gilles Application of the stability lobes theory to milling of thin workpieces, experimental approach. (2003) In: Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering. Kluwer academic publishers, pp. 271-280. ISBN 978140201163

This list was generated on Mon Nov 24 23:04:29 2014 CET.