OATAO - Open Archive Toulouse Archive Ouverte Open Access Week

Items where Institution is : Université de Toulouse > Ecole des Mines d'Albi-Carmaux - EMAC

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 194.

Bennani, Lokman and Villedieu, Philippe and Salaün, Michel and Trontin, Pierre Numerical simulation and modeling of ice shedding: Process initiation. (2014) Computers & Structures, 142 . pp. 15-27. ISSN 0045-7949

Achard, Victor and Bouvet, Christophe and Castanié, Bruno and Chirol, Clément Discrete ply modelling of open hole tensile tests. (2014) Composite Structures, vol. 113 . pp. 369-381. ISSN 0263-8223

Seguy, Sébastien and Arnaud, Lionel and Insperger, Tamás Chatter in interrupted turning with geometrical defects: an industrial case study. (2014) The International Journal of Advanced Manufacturing Technology, vol. 75 (n° 1-4). pp. 45-56. ISSN 0268-3768

Ostré, Benjamin and Bouvet, Christophe and Lachaud, Frédéric and Minot, Clément and Aboissière, Jacky Edge impact damage scenario on stiffened composite structure. (2014) Journal of Composite Materials . ISSN 0021-9983

Rivallant, Samuel and Bouvet, Christophe and Abi Abdallah, Elias and Broll, Bernhard and Barrau, Jean-Jacques Experimental analysis of CFRP laminates subjected to Compression After Impact: the role of impact-induced cracks in failure. (2014) Composite Structures, vol. 111 . pp. 147-157. ISSN 0263-8223

Dubreuil, Sylvain and Berveiller, Marc and Petitjean, Frank and Salaün, Michel Construction of bootstrap confidence intervals on sensitivity indices computed by polynomial chaos expansion. (2014) Reliability Engineering & System Safety, vol. 121 . pp. 263-275. ISSN 0951-8320

Israr, Haris Ahmad and Rivallant, Samuel and Bouvet, Christophe and Barrau, Jean-Jacques Finite element simulation of 0°/90° CFRP laminated plates subjected to crushing using a free-face-crushing concept. (2014) Composites Part A: Applied Science and Manufacturing, vol. 62 . pp. 16-25. ISSN 1359-835X

Busca, Damien and Fazzini, Marina and Lorrain, Bernard and Mistou, Sébastien and Karama, Moussa and Pastor, Marie-Laetitia High-Speed Stereo Digital Image Correlation: Application to Biaxial Fatigue. (2014) Strain . ISSN 0039-2103

Munoz Cuartas, Victor and Perrin, Marianne and Pastor, Marie-Laetitia and Welemane, Hélène and Cantarel, Arthur and Karama, Moussa Identification of the elastic properties in CFRP composites. (2014) In: International Symposium on Aircraft Materials ACMA 2014, 23 April 2014 - 26 April 2014 (Marrakech, Morocco).

Vieille, Benoit and Casado, Victor Manuel and Bouvet, Christophe Influence of matrix toughness and ductility on the compression-after-impact behavior of woven-ply thermoplastic- and thermosetting-composites: A comparative study. (2014) Composite Structures, vol. 110 . pp. 207-218. ISSN 0263-8223

Duval , Mickaël and Passieux, Jean-Charles and Salaün, Michel and Guinard, Stéphane Local/global non-intrusive parallel coupling for large scale mechanical analysis. (2014) In: 11th World Congress on Computational Mechanics - 5th European Conference on Computational Mechanics. IACM-ECCOMAS, 20 July 2014 - 25 July 2014 (Barcelone, Spain).

Duval , Mickaël and Passieux, Jean-Charles and Salaün, Michel and Guinard, Stéphane Non-Intrusive model coupling: A flexible way to handle local geometric and mechanical details in FEA. ( In Press: 2014) In: Joint conference on Mechanical, Design Engineering & Advanced Manufacturing, 18 June 2014 - 20 June 2014 (Toulouse, France).

Pommier-Budinger, Valérie and Budinger, Marc Sizing optimization of piezoelectric smart structures with meta-modeling techniques for dynamic applications. (2014) International Journal of Applied Electromagnetics and Mechanics . ISSN 1875-8800

Mohd Zawawi, Fazila and Lv, Peng and Prothin, Sebastien and Morlier, Joseph and Moschetta, Jean-Marc and Benard, Emmanuel Study of a flexible UAV proprotor. (2014) Internation Journal of Engineering Systems Modelling and Simulation, vol. 6 (n° 3/4). pp. 149-161. ISSN 1755-9758

Munoz Cuartas, Victor and Perrin, Marianne and Pastor, Marie-Laetitia and Welemane, Hélène and Cantarel, Arthur and Karama, Moussa Utilisation de la thermographie infrarouge et de l'émission acoustique pour l'identification de l'endommagement d'un composite stratifié carbone-époxy. (2014) In: VIIIèmes Journées d’Etudes Techniques - International congress for applied mechanics JET 2014, 28 April 2014 - 30 April 2014 (Marrakech, Morocco).

Lv, Peng and Mohd-Zawawi, Fazila and Benard, Emmanuel and Prothin, Sebastien and Moschetta, Jean-Marc and Morlier, Joseph An Application of Adaptive Blades on Convertible MAVs. (2013) International Journal of Micro Air Vehicles, vol. 5 (n° 4). pp. 229-243. ISSN 1756-8293

Munoz, Victor and Perrin, Marianne and Pastor, Marie-Laetitia and Welemane, Hélène and Cantarel, Arthur and Karama, Moussa Application of non destructive testing to the detection of aeronautical defects in composite structure. (2013) Nonconventional Technologies Review . ISSN 1454-3087

Amiot, Fabien and Bornert, Michel and Doumalin, Pascal and Dupré, Jean-Christophe and Fazzini, Marina and Orteu, Jean-José and Poilane, Christophe and Robert, Laurent and Rotinat, René and Toussaint, Eveline and Wattrisse, Bertrand and Wienin, Jean-Samuel Assessment of digital image correlation measurement accuracy in the ultimate error regime: main results of a collaborative benchmark. (2013) Strain, vol. 49 (n°6). pp. 483-496. ISSN 1475-1305

Pitiot, Paul and Aldanondo, Michel and Vareilles, Elise and Coudert, Thierry and Zhang, Linda Optimizing concurrent configuration and planning: a proposition to reduce computation time. ( In Press: 2013) In: IEEE International Conference on Industrial Engineering and Engineering Management, 10 December 2013 - 13 December 2013 (Bangkok, Thailand).

Pozzolini, Cédric and Renard, Yves and Salaün, Michel The singular dynamic method for dynamic contact of thin elastic structures. (2013) ESAIM: Proceedings, vol. 42 . pp. 20-33. ISSN 1270-900X

Kolopp, Amélie and Rivallant, Samuel and Bouvet, Christophe Experimental study of sandwich structures as armour against medium-velocity impacts. (2013) International Journal of Impact Engineering, vol. 61 . pp. 24-35. ISSN 0734-743X

Ben Slima, Khalil and Penazzi, Luc and Mabru, Catherine and Ronde-Oustau, François Fatigue analysis-based numerical design of stamping tools made of cast iron. (2013) The International Journal of Advanced Manufacturing Technology, vol. 67 (n° 5-8). pp. 1643-1650. ISSN 0268-3768

Giraud, Xavier and Sartor, Marc and Roboam, Xavier and Sareni, Bruno and Piquet, Hubert and Budinger, Marc and Vial, Sébastien Load allocation problem for optimal design of aircraft electrical power system. (2013) International Journal of Applied Electromagnetics and Mechanics, vol. 43 (n° 1-2). pp. 1-13. ISSN 1383-5416

Hachemane, Belkacem and Zitoune, Redouane and Bezzazi, Boudjema and Bouvet, Christophe Sandwich composites impact and indentation behaviour study. (2013) Composites Part B: Engineering, vol. 51 . pp. 1-10. ISSN 1359-8368

Lecoq, Olivier Caractérisation des milieux complexes et mise en forme optimisée : Du liquide au solide en passant par le pâteux. (2013) [HDR]

Vieille, Benoit and Casado, Victor Manuel and Bouvet, Christophe About the impact behavior of woven-ply carbon fiber-reinforced thermoplastic- and thermosetting-composites: A comparative study. (2013) Composite Structures, vol. 101 . pp. 9-21. ISSN 0263-8223

Munoz Cuartas, Victor and Perrin, Marianne and Pastor, Marie-Laetitia and Welemane, Hélène and Cantarel, Arthur and Karama, Moussa Application of non destructive testing to the detection of aeronautical defects in composite structures. (2013) In: International Conference of Nonconventional Technologies, 12 June 2013 - 15 June 2013 (Sibiu, Romania).

Garnier, Christian and Pastor, Marie-Laetitia and Lorrain, Bernard and Pantalé, Olivier Fatigue behaviour of impacted composite structures. (2013) Composite Structures, vol. 100 . pp. 443-450. ISSN 0263-8223

Busca, Damien and Fazzini, Marina and Lorrain, Bernard and Mistou, Sébastien and Karama, Moussa and Pastor, Marie-Laetitia High-speed digital image correlation: application to bi-axial fatigue. (2013) In: PhotoMechanics 2013, 27 May 2013 - 29 May 2013 (Montpellier, France). (Unpublished)

Péronnet, Elodie and Pastor, Marie-Laetitia and Welemane, Hélène and Huillery, Richard Non destructive testing of artificial defects in composite structures by thermal full field measurement methods. (2013) In: PhotoMechanics 2013, 27 May 2013 - 29 May 2013 (Montpellier, France). (Unpublished)

Roussouly, Nicolas and Petitjean, Frank and Salaün, Michel A new adaptive response surface method for reliability analysis. (2013) Probabilistic Engineering Mechanics, vol. 32 . pp. 103-115. ISSN 0266-8920

Maillet, Irène and Michel, Laurent and Rico, Germain and Fressinet, Mathieu and Gourinat, Yves A new test methodology based on structural resonance for mode I fatigue delamination growth in an unidirectional composite. (2013) Composite Structures, vol. 97 . pp. 353-362. ISSN 0263-8223

Chaussumier, Michel and Mabru, Catherine and Shahzad, Majid and Chieragatti, Rémy and Rezaï-Aria, Farhad A predictive fatigue life model for anodized 7050 aluminium alloy. (2013) International Journal of Fatigue, vol. 48 . pp. 205-213. ISSN 0142-1123

Israr, Haris Ahmad and Rivallant, Samuel and Barrau, Jean-Jacques Experimental investigation on mean crushing stress characterization of carbon–epoxy plies under compressive crushing mode. (2013) Composite Structures, vol. 96 . pp. 357-364. ISSN 0263-8223

Mousseigne, Michel and Landon, Yann and Seguy, Sébastien and Dessein, Gilles and Redonnet, Jean-Max Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory. (2013) International Journal of Machine Tools and Manufacture, vol. 65 . pp. 47-57. ISSN 0890-6955

Pin, Lisa and Ansart, Florence and Bonino, Jean-Pierre and Le Maoult, Yannick and Vidal, Vanessa and Lours, Philippe Reinforced sol–gel thermal barrier coatings and their cyclic oxidation life. (2013) Journal of the European Ceramic Society, vol. 33 (n° 2). pp. 269-276. ISSN 0955-2219

Abdulhamid, Hakim and Kolopp, Amélie and Bouvet, Christophe and Rivallant, Samuel Experimental and numerical study of AA5086-H111 aluminum plates subjected to impact. (2013) International Journal of Impact Engineering, vol. 51 . pp. 1-12. ISSN 0734-743X

Wang, Xuan and Reysset, Aurélien and Pommier-Budinger, Valérie and Gourinat, Yves A Modified Preisach Model for Hysteresis in Piezoelectric Actuators. (2013) In: 11th International Workshop of Electronics, Control, Measurement, Signals & application to Mechatronics (ECMSM), 24 June 2013 - 26 June 2013 (Toulouse, France).

Dubreuil, Sylvain and Petitjean, Frank and Salaün, Michel A coupled parametric and nonparametric approach for modal analysis of a satellite. (2013) In: ICOSSAR 2013, 11th International Conference on Structural Safety and Reliability, 16-20 Jun 2013, New York (USA) .

Roussouly, Nicolas and Morlier, Joseph and Charlotte, Miguel and Salaün, Michel Approche fiabiliste pour l’optimisation locale d’un problème couplé fluide-structure. (2013) In: 11ème colloque CSMA 2013 (Calcul des Structures et Modélisation), 13-17 May 2013, Giens, France .

Gontier, Justine and Hervas Garcia, Carlos and Bordeneuve-Guibé, Joël and Espinosa, Christine CANSAT: Multiphysical experimental design of a probe come-back mission. (2013) In: 64th IAC - International Astronautical Congress, 23 September 2013 - 27 September 2013 (Beijing, China).

Le Dref, John and Eyma, Florent and Dessein, Gilles and Denaud, Louis Etienne and Landon, Yann Comparative study of tools in drilling composites T700-M21 and T800-M21. (2013) Advanced Materials Research, vol. 698 . pp. 59-68. ISSN 1662-8985

Lisle, Teddy and Bouvet, Christophe and Pastor, Marie-Laetitia and Margueres, Philippe and Prieto Corral, Roberto Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography. (2013) Composites Part A: Applied Science and Manufacturing, vol. 53 . pp. 75-87. ISSN 1359-835X

Cherrier, Olivier and Selva, Pierre and Budinger, Valerie and Lachaud, Frédéric and Morlier, Joseph Damage localization map using electromechanical impedance spectrums and inverse distance weighting interpolation: Experimental validation on thin composite structures. (2013) Structural Health Monitoring, vol. 12 (n° 4). pp. 311-324. ISSN 1475-9217

Dubreuil, Sylvain and Petitjean, Frank and Salaün, Michel Etude numérique de l'influence de la structure de dépendance des valeurs propres en synthèse modale probabiliste. (2013) In: CFM 2013 - 21ème Congrès Français de Mécanique, 26-30 Aug 2013, Bordeaux, France . (Unpublished)

Rivallant, Samuel and Bouvet, Christophe and Hongkarnjanakul, Natthawat Failure analysis of CFRP laminates subjected to Compression After Impact: FE simulation using discrete interface elements. (2013) Composites Part A: Applied Science and Manufacturing, vol. 55 . pp. 83-93. ISSN 1359-835X

Munoz Cuartas, Victor and Perrin, Marianne and Pastor, Marie-Laetitia and Welemane, Hélène and Cantarel, Arthur and Karama, Moussa Identification of the elastic properties of composite materials. (2013) In: International Conference on Structural Analysis of Advanced Materials, 23 September 2013 - 26 September 2013 (Island of Kos, Greece). (Unpublished)

Kolopp, Amélie and Alvarado, Raquel and Rivallant, Samuel and Bouvet, Christophe Modeling impact on aluminium sandwich including velocity effects in honeycomb core. (2013) Journal of Sandwich Structures and Materials . ISSN 1099-6362

Péronnet, Elodie and Pastor, Marie-Laetitia and Huillery, Richard and Dalverny, Olivier and Mistou, Sébastien and Karama, Moussa and Génot, Sylvain Non destructive investigation of defects in composite structures by fullfield measurement methods. (2013) Key Engineering Materials, vol. 550 . pp. 135-142. ISSN 1013-9826

Hongkarnjanakul, Natthawat and Rivallant, Samuel and Bouvet, Christophe and Miranda, Arturo Permanent indentation characterization for low-velocity impact modelling using three-point bending test. (2013) Journal of Composite Materials . ISSN 0021-9983

Rouault, Thomas and Bouvet, Christophe and Nègre, Vincent and Rauch, Patrice Reversible Rail Shear Apparatus Applied to the Study of Woven Laminate Shear Behavior. (2013) Experimental Mechanics . ISSN 0014-4851

Sanches, Leonardo and Alazard, Daniel and Michon, Guilhem and Berlioz, Alain Robustness Analysis of Helicopter Ground Resonance with Parametric Uncertainties in Blade Properties. (2013) Journal of Guidance, Control, and Dynamics, vol. 36 (n° 1). pp. 272-281. ISSN 0731-5090

Pozzolini, Cédric and Renard, Yves and Salaün, Michel Schémas asymptotiquement conservatifs en énergie dans un problème de vibro-impact de plaques. (2013) In: CSMA 2013 - 11ème Colloque National en Calcul des Structures, 13-17 May 2013, Giens, France .

Selva, Pierre and Cherrier, Olivier and Budinger, Valerie and Lachaud, Frédéric and Morlier, Joseph Smart monitoring of aeronautical composites plates based on electromechanical impedance measurements and artificial neural networks. (2013) Engineering Structures, vol. 56 . pp. 794-804. ISSN 0141-0296

Lv, Peng and Prothin, Sebastien and Mohd Zawawi, Fazila and Benard, Emmanuel and Morlier, Joseph and Moschetta, Jean-Marc Study of A Flexible Blade for Optimized Proprotor. (2013) In: ERCOFTAC International symposium Unsteady separation in fluid-structure interaction, 17-21 Jun 2013, Mykonos, Greece .

Mohd-Zawawi, Fazila and Prothin, Sebastien and Lv, Peng and Bénard, Emmanuel and Moschetta, Jean-Marc and Morlier, Joseph Study of a Flexible UAV Proprotor. (2013) In: 48th International Symposium of Applied Aerodynamics , 25 March 2013 - 27 March 2013 (Saint-Louis, France).

Busca, Damien and Fazzini, Marina and Lorrain, Bernard and Mistou, Sébastien and Karama, Moussa and Pastor, Marie-Laetitia Suivi d’essais de fatigue bi-axiale sur des composites stratifiés. (2013) In: 13ème colloque international francophone sur les "Méthodes et Techniques Optiques pour l'Industrie" - CMOI2013, 18 November 2013 - 22 November 2013 (Orléans, France).

Dubreuil, Sylvain and Petitjean, Frank and Salaün, Michel Synthèse modale probabiliste de systèmes à plusieurs degrés de liberté. (2013) In: CSMA 2013 - 11ème Colloque National en Calcul des Structures, 13-17 May 2013, Giens, France .

Ammarcha, Chawki and Gatumel, Cendrine and Dirion, Jean-Louis and Cabassud, Michel and Mizonov, Vadim and Berthiaux, Henri Transitory powder flow dynamics during emptying of a continuous mixer. (2013) Chemical Engineering and Processing : Process Intensification, vol. 65 . pp. 68-75. ISSN 0255-2701

Hongkarnjanakul, Natthawat and Bouvet, Christophe and Rivallant, Samuel Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure. (2013) Composite Structures, vol. 106 . pp. 549-559. ISSN 0263-8223

Pozzolini, Cédric and Renard, Yves and Salaün, Michel Vibro-impact of a plate on rigid obstacles: existence theorem, convergence of a scheme and numerical simulations. (2013) IMA Journal of Numerical Analysis, vol. 33 (n° 1). pp. 261 -294. ISSN 0272-4979

Pitiot, Paul and Aldanondo, Michel and Vareilles, Elise and Zhang, Linda and Coudert, Thierry Some experimental results relevant to the optimization of configuration and planning problems. (2012) In: 20th International symposium on methodologies for intelligent systems - ISMIS, 4 December 2012 - 7 December 2012 (Macau, China).

El Sawi, Ihab and Olivier, Philippe A. and Demont, Philippe and Bougherara, Habiba Processing and electrical characterization of a unidirectional CFRP composite filled with double walled carbon nanotubes. (2012) Composites Science and Technology, vol. 73 . pp. 19-26. ISSN 0266-3538

Ammarcha, Chawki and Gatumel, Cendrine and Dirion, Jean-Louis and Cabassud, Michel and Mizonov, Vadim and Berthiaux, Henri Predicting bulk powder flow dynamics in a continuous mixer operating in transitory regimes. (2012) Advanced Powder Technology, vol. 23 (n° 6). pp. 787-800. ISSN 0921-8831

El Sawi, Ihab and Olivier, Philippe A. and Demont, Philippe and Bougherara, Habiba Investigation of the effect of double-walled carbon nanotubes on the curing reaction kinetics and shear flow of an epoxy resin. (2012) Journal of Applied Polymer Science, vol. 126 (n°1). pp. 358-366. ISSN 0021-8995

Adam, Louis and Bouvet, Christophe and Castanié, Bruno and Daidie, Alain and Bonhomme, Elodie Discrete ply model of circular pull-through test of fasteners in laminates. (2012) Composite Structures, vol. 94 (n° 10). pp. 3082-3091.

Renault, Cyril and Roche, Jérôme and Ciumag, Mihaela Raluca and Tzedakis, Theodore and Colin, Stéphane and Serrano, Karine and Reynes, Olivier and André-Barrès, Christiane and Winterton, Peter Design and optimization of electrochemical microreactors for continuous electrosynthesis. (2012) Journal of Applied Electrochemistry, vol. 42 (n° 9). pp. 667-677. ISSN 0021-891X

Tawk, Issam and Aubry, Julien and Navarro, Pablo and Ferrero, Jean-François and Marguet, Steven and Rivallant, Samuel and Lemaire, Sandrine and Rauch, Patrice Study of impact on helicopter blade. (2012) Engineering Failure Analysis, vol. 24 . pp. 38-45. ISSN 1350-6307

Lasry, Jérémie and Renard, Yves and Salaün, Michel Stress intensity factors computation for bending plates with extended finite element method. (2012) International Journal for Numerical Methods in Engineering, vol. 91 (n° 9). pp. 909-928. ISSN 0029-5981

Sanches, Leonardo and Michon, Guilhem and Berlioz, Alain and Alazard, Daniel Parametrically excited helicopter ground resonance dynamics with high blade asymmetries. (2012) Journal of Sound and Vibration, vol. 331 (n° 16). pp. 3897-3913. ISSN 0022-460X

Fadaei, Hossein and Sennoune, Mohammed and Salvador, Sylvain and Lapene, Alexandre and Debenest, Gérald Modelling of non-consolidated oil shale semi-coke forward combustion: influence of carbon and calcium carbonate contents. (2012) Fuel, vol. 95 . pp. 197-205. ISSN 0016-2361

Goueffon, Yann and Aldebert, Grégory and Mabru, Catherine and Arurault, Laurent and Tonon, Claire and Guigue, Pascale Flaking of black anodic films in space environment: Ageing and numerical simulation. (2012) Mechanics of Materials, vol. 45 . pp. 72-82. ISSN 0167-6636

Péronnet, Elodie and Eyma, Florent and Welemane, Hélène and Mistou, Sébastien Characterization and comparison of defects detection limits of ultrasonic non destructive techniques. (2012) Key Engineering Materials, vol. 498 . pp. 79-88. ISSN 1013-9826

Veran-Tissoires, Stéphanie and Geoffroy, Sandrine and Marcoux, Manuel and Prat, Marc Chapter 8. Evaporation and Wicking. (2012) In: Wicking in Porous Materials: Traditional and Modern Modeling Approaches. CRC Press, pp. 201-236. ISBN 978-1-4398-7432-5

Vieille, Benoit and Casado, Victor Manuel and Bouvet, Christophe Comparative study on the impact behavior and damage tolerance of woven carbon fiber reinforced thermoplastic– and thermosetting– composites. (2012) In: ECCM15 - 15th European conference on composite materials, 24-28 June 2012, Venice, Italy .

Senatore, Johanna and Segonds, Stéphane and Rubio, Walter and Dessein, Gilles Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones. (2012) Computer-Aided Design, vol. 44 (n° 12). pp. 1151-1160. ISSN 00104485

Vareilles, Elise and Coudert, Thierry and Aldanondo, Michel and Geneste, Laurent and Abeille, Joël Coupling system design and project planning: discussion on a bijective link between system and project structures. (2012) In: 14th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'2012, 23-25 May 2012, Bucharest, Romania .

Mohd Zawawi, Fazila and Morlier, Joseph and Grondin, Gilles and Moschetta, Jean-Marc Design of Optimum Torsionally Flexible PropRotors for Tilt-Body MAVs. (2012) Applied Mechanics and Materials - AEROTECH IV - Recent Advances in Aerospace Technologies, vol. 225 . pp. 281-286. ISSN 1660-9336

Dubreuil, Sylvain and Berveiller, Marc and Petitjean, Frank and Salaün, Michel Determination of Bootstrap confidence intervals on sensitivity indices obtained by polynomial chaos expansion. (2012) In: JFMS12 - Journées Fiabilité des Matériaux et des Structures, 04-06 Jun 2012, Chambéry, France .

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad Effect of sealed anodic film on fatigue performance of 2214-T6 aluminium alloy. (2012) Surface and Coatings Technology, vol. 206 (n° 11-12). pp. 2733-2739. ISSN 0257-8972

Rahmé, Pierre and Bouvet, Christophe and Rivallant, Samuel and Fascio, Valia and Valembois, Guy Experimental investigation of impact on composite laminates with protective layers. (2012) Composites Science and Technology, 72 (2). pp. 182-189. ISSN 0266-3538

Vareilles, Elise and Aldanondo, Michel and Codet de Boisse, Aurélien and Coudert, Thierry and Gaborit, Paul and Geneste, Laurent How to take into account general and contextual knowledge for interactive aiding design: Towards the coupling of CSP and CBR approaches. (2012) Engineering Applications of Artificial Intelligence, vol. 25 (n° 1). pp. 31 - 47. ISSN 0952-1976

Coudert, Thierry and Vareilles, Elise and Geneste, Laurent and Aldanondo, Michel Improvement of retrieval in Case-Based Reasoning for system design. (2012) In: IEEE Industrial engineering and engineering management - IEEM, 10 December 2012 - 20 December 2012 (Hong Kong, China).

Bouvet, Christophe and Rivallant, Samuel and Barrau, Jean-Jacques Low velocity impact modeling in composite laminates capturing permanent indentation. (2012) Composites Science and Technology, vol. 72 (n° 16). pp. 1977-1988. ISSN 0266-3538

Péronnet, Elodie and Pastor, Marie-Laetitia and Huillery, Richard and Dalverny, Olivier and Mistou, Sébastien and Welemane, Hélène Non destructive investigation of defects in composite structures by three infrared thermographic techniques. (2012) In: International conference on experimental mechanics ICEM 15, 22 July 2012 - 27 July 2012 (Porto, Portugal).

Renault, Cyril and Colin, Stéphane and Orieux, Stéphane and Cognet, Patrick and Tzedakis, Theodore Optimal design of multi-channel microreactor for uniform residence time distribution. (2012) Microsystem Technologies, vol. 18 (n° 2). pp. 209-223. ISSN 0946-7076

Njionhou, Alvine and Berthet, Florent and Castanié, Bruno and Bouvet, Christophe Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates. (2012) Applied Composite Materials, vol. 19 (n° 6). pp. 885-899. ISSN 0929-189X

Jhinaoui, Ahmed and Mevel, Laurent and Morlier, Joseph Subspace Identification for Linear Periodically Time-varying Systems. (2012) In: 16th IFAC Symposium on System Identification, 11-13 Jul 2012, Brussels, Belgium .

Jhinaoui, Ahmed and Mevel, Laurent and Morlier, Joseph Subspace Instability Monitoring for Linear Periodically Time-Varying Systems. (2012) In: 16th IFAC Symposium on System Identification, 11-13 Jul 2012, Brussels, Belgium .

Sennoune, Mohamed and Salvador, Sylvain and Quintard, Michel Toward the Control of the Smoldering Front in the Reaction-Trailing Mode in Oil Shale Semicoke Porous Media. (2012) Energy & Fuels, vol. 26 (n° 6). pp. 3357-3367. ISSN 0887-0624

Pin, Lisa and Ansart, Florence and Bonino, Jean-Pierre and Le Maoult, Yannick and Vidal, Vanessa and Lours, Philippe Processing, repairing and cyclic oxidation behaviour of sol–gel thermal barrier coatings. (2011) Surface and Coatings Technology, vol. 206 (n° 7). pp. 1609-1614. ISSN 0257-8972

Lachaud, Frédéric Multi scale analysis of composite structures behavior. (2011) [HDR]

Gourc, Etienne and Seguy, Sébastien and Arnaud, Lionel Chatter milling modeling of active magnetic bearing spindle in high-speed domain. (2011) International Journal of Machine Tools and Manufacture, vol. 51 (n° 12). pp. 928-936. ISSN 0890-6955

Camy, Séverine and Letourneau, Jean-Jacques and Condoret, Jean-Stéphane Experimental study of high pressure phase equilibrium of (CO2 + NO2/N2O4) mixtures. (2011) The Journal of Chemical Thermodynamics, vol. 43 (n° 12). pp. 1954-1960. ISSN 0021-9614

Gouache, Thibault and Brunskill, Christopher and Scott, Gregory and Gao, Yang and Coste, Pierre and Gourinat, Yves Regolith simulant preparation methods for hardware testing. (2011) Planetary and Space Science, vol. 58 (n° 14-15). pp. 1977-1984. ISSN 0032-0633

Tadier, Solène and Le Bolay, Nadine and Girod Fullana, Sophie and Cazalbou, Sophie and Charvillat, Cédric and Labarrère, Michel and Boitel, Daniel and Rey, Christian and Combes, Christèle Co-grinding significance for calcium carbonate-calcium phosphate mixed cement. Part II: effect on cement properties. (2011) Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 99B (n° 2). pp. 302-312. ISSN 1552-4973

Pozzolini, Cédric and Salaün, Michel Some energy conservative schemes for vibro-impacts of a beam on rigid obstacles. (2011) ESAIM: Mathematical Modelling and Numerical Analysis, vol. 45 (n° 6). pp. 1163-1192. ISSN 0764-583X

Ansart, Renaud and Letourneau, Jean-Jacques and de Ryck, Alain and Dodds, John A. Dust emission by powder handling: Influence of the hopper outlet on the dust plume. (2011) Powder Technology, vol. 212 (n° 3). pp. 418-424. ISSN 0032-5910

Sanches, Leonardo and Michon, Guilhem and Berlioz, Alain and Alazard, Daniel Instability zones for isotropic and anisotropic multibladed rotor configurations. (2011) Mechanism and Machine Theory, vol. 46 (n° 8). pp. 1054-1065 . ISSN 0094-114X

Ben Slima, Khalil and Penazzi, Luc and Mabru, Catherine and Ronde-Oustau, François and Rezaï-Aria, Farhad A new method for advanced virtual design of stamping tools for automotive industry: application to nodular cast iron EN-GJS-600-3. (2011) In: The 14th International Conference on Material Forming - ESAFORM 2011, 27-29 April 2011, Belfast, UK .

Garnier, Christian and Pastor, Marie-Laetitia and Lorrain, Bernard Finite element model for impact on composite structures. (2011) In: 16th International Conference on Composite Structures , 28 June 2011 - 28 June 2011 (Porto, Portugal).

Perret, Adrien and Mistou, Sébastien and Denaud, Louis Etienne and Mollé, Thierry and Veyrac, Claudia and Karama, Moussa Numerical modelling of a composite fuselage manufactured by liquid resin infusion. (2011) Applied Mechanics and Materials, vol. 62 . pp.49-56. ISSN 1662-7482

Shad, Rizwan and Michon, Guilhem and Berlioz, Alain Modeling and analysis of nonlinear rotordynamics due to higher order deformations in bending. (2011) Applied Mathematical Modelling, vol. 35 (n° 5). pp. 2145-2159 . ISSN 0307-904X

Chitu, Toma Mihai and Oulahna, Driss and Hemati, Mehrdji Rheology, granule growth and granule strength: Application to the wet granulation of lactose–MCC mixtures. (2011) Powder Technology, vol. 208 (n° 2). pp. 441-453. ISSN 0032-5910

Chitu, Toma Mihai and Oulahna, Driss and Hemati, Mehrdji Wet granulation in laboratory scale high shear mixers: Effect of binder properties. (2011) Powder Technology, vol. 206 (n° 1-2). pp. 25-33. ISSN 0032-5910

Chitu, Toma Mihai and Oulahna, Driss and Hemati, Mehrdji Wet granulation in laboratory-scale high shear mixers: Effect of chopper presence, design and impeller speed. (2011) Powder Technology, vol. 206 (n° 1-2). pp. 34-43. ISSN 0032-5910

Jhinaoui, Ahmed and Mevel, Laurent and Morlier, Joseph A CUSUM test with sliding reference for ground resonance monitoring. (2011) In: The 6th International Workshop on Advanced Smart materials and Smart Structures Technology (ANCRISST 2011 ), 25-26 Jul 2011, Dalian, China .

Roussouly, Nicolas and Petitjean, Frank and Salaün, Michel Analyse de la fiabilité d’une structure spatiale. (2011) In: CSMA 2011 - 10ème Colloque National en Calcul des Structures, 09-13 May 2011, Giens, France .

Péronnet, Elodie and Eyma, Florent and Pastor, Marie-Laetitia and Welemane, Hélène Caractérisation et comparaison des limites de détection de techniques de contrôle non destructif : méthodes ultrasonores et méthodes optiques. (2011) Contrôles-Essais-Mesures, Vol. 37 . pp. 63-68. ISSN 1637-4657

Morlier, Joseph and Bettebghor, Dimitri Compressed sensing applied to modeshapes reconstruction. (2011) In: IMAC XXX Conference and exposition on structural dynamics, 30 Jan – 02 Feb 2012, Jacksonville, USA . (Unpublished)

Gourc, Etienne and Seguy, Sébastien and Dessein, Gilles Dynamical modeling of spindle with active magnetic bearing for milling process. (2011) Advanced Materials Research, vol. 423 . pp. 200-209. ISSN 1662-8985

Ansart, Renaud and Neau, Hervé and Accart, Philippe and de Ryck, Alain and Simonin, Olivier Elutriation from Fluidized BEDS: Comparison between experimental measurements and 3D simulation results. (2011) In: International Conference on Circulating Fluidized Beds and FluidiZed Bed Technology - CFB 10, 1-5 May 2011, Oregon, USA . (Unpublished)

Gourc, Etienne and Michon, Guilhem and Seguy, Sébastien and Berlioz, Alain Experimental investigation and theoretical analysis of a nonlinear energy sink under harmonic forcing. (2011) In: ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 28-31 August 2011, Washington, USA .

Bizeul, Matthieu and Bouvet, Christophe and Barrau, Jean-Jacques and Cuenca, Rémy Fatigue crack growth in thin notched woven glass composites under tensile loading. Part I: experimental. (2011) Composites Science and Technology, vol. 71 (n° 3). pp. 289-296. ISSN 0266-3538

Bizeul, Matthieu and Bouvet, Christophe and Barrau, Jean-Jacques and Cuenca, Rémy Fatigue crack growth in thin notched woven glass composites under tensile loading. Part II: modelling. (2011) Composites Science and Technology, vol. 71 (n° 3). pp. 297-305. ISSN 0266-3538

Israr, Haris Ahmad and Rivallant, Samuel and Zeng, Huabin and Barrau, Jean-Jacques Finite element modelling of CFRP plates under crushing. (2011) In: 18th International Conference on Composite Materials - ICCM 18 , 21-26 Aug 2011, Jeju Island, Korea .

Foucaud, Simon and Michon, Guilhem and Morlier, Joseph and Gourinat, Yves Harmonic response of the organ of corti: results for wave dispersion. (2011) In: The 11th International Mechanics of Hearing Workshop, 16–22 Jul 2011, Williamstown, USA .

Kolopp, Amélie and Rivallant, Samuel and Bouvet, Christophe Impact sur structures sandwich composites pour application de blindage aéronautique. (2011) In: JNC 17 - 17èmes Journées Nationales sur les Composites, 15-17 juin 2011, Poitiers, France .

Limido, Jérôme and Espinosa, Christine and Salaün, Michel and Mabru, Catherine and Chieragatti, Rémy and Lacome, Jean-Luc Metal cutting modelling SPH approach. (2011) International Journal of Machining and Machinability of Materials, vol. 9 (n° 3-4). pp. 177-196. ISSN 1748-5711

Morlier, Joseph and Bergh, Mauricio and Mevel, Laurent Modeshapes recognition using Fourier descriptors: a simple SHM example. (2011) In: IMAC XXX Conference and exposition on structural dynamics, 30 Jan – 02 Feb 2012, Jacksonville, USA . (Unpublished)

Pozzolini, Cédric and Renard, Yves and Salaün, Michel Schémas numériques conservatifs pour des problèmes de vibro-impacts de poutres et de plaques. (2011) In: CSMA 2011 - 10ème Colloque National en Calcul des Structures, 09-13 May 2011, Giens, France .

Arnaud, Lionel and Gonzalo, Oscar and Seguy, Sébastien and Jauregi, Haritz and Peigné, Grégoire Simulation of low rigidity part machining applied to thin-walled structures. (2011) The International Journal of Advanced Manufacturing Technology, vol. 54 (n° 5-8). pp. 479-488. ISSN 0268-3768

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad Surface characterization and influence of anodizing process on fatigue life of Al 7050 alloy. (2011) Materials & Design, vol. 32 (n° 6). pp. 3328-3335 . ISSN 0261-3069

Garnier, Christian and Pastor, Marie-Laetitia and Eyma, Florent and Lorrain, Bernard The detection of aeronautical defects in-situ on composite structures using Non Destructive Testing. (2011) Composite Structures, vol. 93 . pp. 1328-1336. ISSN 0263-8223

Ledru, Yohann and Bernhart, Gérard and Piquet, Robert and Schmidt, Fabrice and Michel, Laurent Coupled visco-mechanical and diffusion void growth modelling during composite curing. (2010) Composites Science and Technology, vol. 70 (n° 15). pp. 2139-2145. ISSN 0266-3538

Goueffon, Yann and Mabru, Catherine and Labarrère, Michel and Arurault, Laurent and Tonon, Claire and Guigue, Pascale Investigations into the coefficient of thermal expansion of porous films prepared on AA7175 T7351 by anodizing in sulphuric acid electrolyte. (2010) Surface and Coatings Technology, vol. 205 (n° 7). pp. 2643-2648. ISSN 0257-8972

Sniezewski, Julien and LeMaoult, Yannick and Lours, Philippe and Pin, Lisa and Menvie Bekale, Vincent and Monceau, Daniel and Oquab, Djar and Fenech, Justine and Ansart, Florence and Bonino, Jean-Pierre Sol–gel thermal barrier coatings: Optimization of the manufacturing route and durability under cyclic oxidation. (2010) Surface and Coatings Technology, vol. 205 (n° 5). pp. 1256-1251. ISSN 0257-8972

Ilyas, Muhammad. Damage modeling of carbon epoxy laminated composites submitted to impact loading. PhD, Génie Mécanique, Institut Supérieur de l'Aéronautique et de l'Espace, 2010, 241 p.

Reuge, Nicolas and Dexpert-Ghys, Jeannette and Caussat, Brigitte Fluidized-Bed MOCVD of Bi2O3 Thin Films from Bismuth Triphenyl under Atmospheric Pressure. (2010) Chemical Vapor Deposition, vol. 1 (n° 4-6). pp. 123-126. ISSN 0948-1907

Seguy, Sébastien and Insperger, Tamás and Arnaud, Lionel and Dessein, Gilles and Peigné, Grégoire On the stability of high-speed milling with spindle speed variation. (2010) The International Journal of Advanced Manufacturing Technology, vol. 48 (n° 9-12). pp. 883-895. ISSN 0268-3768

Chaussumier, Michel and Shahzad, Majid and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad A fatigue multi-site cracks model using coalescence, short and long crack growth laws, for anodized aluminum alloys. (2010) Procedia Engineering, vol. 2 (n° 1). pp. 995-1004. ISSN 1877-7058

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad Influence of anodizing process on fatigue life of a machined aluminium alloy. (2010) Procedia Engineering, vol. 2 (n° 1). pp. 1015-1024. ISSN 1877-7058

Weiss, Ambrosius and Trabelsi, Walid and Michel, Laurent and Barrau, Jean-Jacques and Mahdi, Stephane Influence of ply-drop location on the fatigue behaviour of tapered composites laminates. (2010) Procedia Engineering, vol. 2 (n° 1). pp. 1105-1114. ISSN 1877-7058

Shah, Masood and Mabru, Catherine and Rezaï-Aria, Farhad Investigation of crack propagation in X38CrMoV5 (AISI H11) tool steel at elevated temperatures. (2010) Procedia Engineering, vol. 2 (n° 1). pp. 2045-2054. ISSN 1877-7058

Gouache, Thibault and Gao, Yang and Gourinat, Yves and Coste, Pierre Wood wasp inspired space and earth drill. (2010) In: Biomimetics Learning from Nature. InTech - Open Access Publisher, Rijeka, Croatia, pp. 467-486. ISBN 9789533070254

Roussouly, Nicolas and Petitjean, Frank and Salaün, Michel and Buffe, Fabrice and Carpine , Anne Application des surfaces de réponse pour l’analyse fiabiliste d’une structure spatiale. (2010) In: JFMS10 - Journées Fiabilité des Matériaux et des Structures, 24-26 Mar 2010, Toulouse, France .

Marger, Thibaut and Pommier-Budinger, Valérie and Maré, J-Charles and Malburet, François Designing redundant metering valves for hydraulic actuators under mixability and low cost-constraints. (2010) In: 10th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference, 13-15 Sept 2010, Fort Worth, United States .

Chieragatti, Rémy and Espinosa, Christine and Lacome, Jean-Luc and Limido, Jérôme and Mabru, Catherine and Salaün, Michel Détermination d’un Kt local associé à la rugosité de surface ; influence sur la tenue en fatigue. (2010) In: 29èmes journées de printemps de la SF2M "Influence des procédés sur la tenue en fatigue, rôle des défauts", 19-20 May 2010, Paris .

Trabelsi, Walid and Michel, Laurent and Othomene, Renaud Effects of stitching on delamination of satin weave carbon-epoxy laminates under mode I, mode II and mixed-mode I/II loadings. (2010) Applied Composite Materials, vol. 17 (n° 6). pp. 575-595. ISSN 0929-189X

Pitiot, Paul and Coudert, Thierry and Geneste, Laurent and Baron, Claude Hybridation of Bayesian networks and evolutionary algorithms for multi-objective optimization in an integrated product design and project management context. (2010) Engineering Applications of Artificial Intelligence, vol. 23 (n° 5). pp. 830 - 843. ISSN 0952-1976

Garnier, Christian and Lorrain, Bernard and Pastor, Marie-Laetitia Impact damage evolution under fatigue loading by InfraRed Thermography on composite structures. (2010) In: 14th International Conference of Experimental Mechanics (ICEM 14), 4 July 2010 - 9 July 2010 (Poitiers, France).

Weiss, Ambrosius and Trabelsi, Walid and Michel, Laurent and Barrau, Jean-Jacques and Mahdi, Stephane Influence of ply-drop location on the fatigue behaviour of tapered composites laminates. (2010) In: 10th International Fatigue Congress, 06-11 June 2010, Prague, Czech Republik .

Duong, Anh Vu and Rivallant, Samuel and Barrau, Jean-Jacques and Petiot, Caroline and Malherbe, Benoît Influence of speed on the crushing behavior of composite plates. (2010) In: ACCM 7 – 7th Asian-Australasian Conference on Composite Materials, 15-18 Nov 2010, Taipei, Taiwan .

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad Influence of surface treatments on fatigue life of Al 7010 alloy. (2010) Journal of Materials Processing Technology, vol. 210 (n° 13). pp. 1821-1826. ISSN 0924-0136

Bizeul, Matthieu and Bouvet, Christophe and Barrau, Jean-Jacques and Cuenca, Rémy Influence of woven ply degradation on fatigue crack growth in thin notched composites under tensile loading. (2010) International Journal of Fatigue, vol. 32 (n° 1). pp. 60-65. ISSN 0142-1123

Sanches, Leonardo and Michon, Guilhem and Berlioz, Alain and Alazard, Daniel Instability zones for isotropic and anisotropic multiblades rotor configurations. (2010) In: 17ème conférence Vibrations, Chocs et Bruits 2010, 15-17 Juin 2010, Ecully, France . (Unpublished)

Sanches, Leonardo and Michon, Guilhem and Berlioz, Alain and Alazard, Daniel Instability zones identification in multiblade rotor dynamics. (2010) In: 11th Pan-American Congress of Applied Mechanics, 04-08 Jan 2010, Foz do Iguaçu, Brazil .

Rahmé, Pierre and Bouvet, Christophe and Rivallant, Samuel and Fascio, Valia and Valembois, Guy Mechanical protection for composite structures submitted to low energy impact. (2010) In: ECCM14 - 14th European Conference on Composite Materials, 07-10 June 2010, Budapest, Hungary .

Bouvet, Christophe and Rivallant, Samuel and Barrau, Jean-Jacques Modelling of impact damage and permanent indentation on laminate composite plate. (2010) In: ECCM14 - 14th European Conference on Composite Materials, 07-10 June 2010, Budapest, Hungary .

Chaussumier, Michel and Shahzad, Majid and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad Modélisation de la multi-fissuration d’un alliage d’aluminium 7010 traité par oxydation anodique chromique. (2010) In: 29èmes journées de Printemps de la SF2M, "Influence des procédés sur la tenue en fatigue, rôle des défauts", 19-20 May 2010, Paris .

Fazzini, Marina and Mistou, Sébastien and Dalverny, Olivier and Robert, Laurent Study of image characteristics on digital image correlation error assessment. (2009) Optics and Lasers in Engineering, vol. 48 . pp. 335-339. ISSN 0143-8166

Romdhana, Mohamed Hédi and Lecomte, Didier and Ladevie, Bruno and Sablayrolles, Caroline Monitoring of pathogenic microorganisms contamination during heat drying process of sewage sludge. (2009) Process Safety and Environmental Protection, vol. 87 (n° 6). pp. 377-386. ISSN 0957-5820

Ansart, Renaud and de Ryck, Alain and Dodds, John A. Dust emission in powder handling: Free falling particle plume characterisation. (2009) Chemical Engineering Journal, vol. 152 (n° 2-3). pp. 415-420. ISSN 1385-8947

Weiss, Ambrosius and Michel, Laurent and Mahdi, Stephane and Cross, Estelle and Barrau, Jean-Jacques Influence of ply-drop position in thickness direction on static and fatigue loading behaviour of carbonepoxy laminates. (2009) In: 17th International Conference on Composite Materials (ICCM-17), 27-31 Jul 2009, Edinburgh, United Kingdom .

Mezeix, Laurent and Bouvet, Christophe and Huez, Julitte and Poquillon, Dominique Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression. (2009) Journal of Materials Science, vol. 44 (n° 14). pp. 3652-3661. ISSN 0022-2461

Shah, Masood and Mabru, Catherine and Boher, Christine and Le Roux, Sabine and Rezaï-Aria, Farhad Crack propagation in X38CrMoV5 (AISI H11) tool steel. (2009) In: TOOL 2009 - Tool steels, 02-04 June 2009, Aachen, Germany .

Shah, Masood and Mabru, Catherine and Boher, Christine and Leroux, Sabine and Rezaï-Aria, Farhad Crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens. (2009) Advanced Engineering Materials, vol. 1 (n° 9). pp. 746-749. ISSN 1438-1656

Mezeix, Laurent and Bouvet, Christophe and Crézé, Serge and Poquillon, Dominique Fibers networks as a new type of core material. Processing and mechanical properties. (2009) In: Materials Research Society (MRS) 2009, 13-17 Apr 2009, San Francisco, United States .

Shah, Masood and Boher, Christine and Le Roux, Sabine and Rezaï-Aria, Farhad and Mabru, Catherine An investigation of the crack propagation in tool steel X38CrMoV5 (AISI H11) in SET specimens. (2009) Revue de Métallurgie - Cahiers d'Informations Techniques (n° 3). pp. 140-145. ISSN 0035-1563

Ansart, Renaud and de Ryck, Alain and Dodds, John A. and Roudet, Matthieu and Fabre, David and Charru, François Dust emission by powder handling: Comparison between numerical analysis and experimental results. (2009) Powder Technology, vol. 190 (n° 1-2). pp. 274-281. ISSN 0032-5910

Toral Vasquez, Javier. Identification et modélisation du comportement des structures composites assemblées par cloutage. PhD, Institut Supérieur de l'Aéronautique et de l'Espace, 2009, 267 p.

Villeneuve, Eric Analyse des connaissances mises en œuvre dans l’aide à la décision en maintenance d'hélicoptères. (2009) [Mémoire]

Michon, Guilhem and Berlioz, Alain and Lamarque, Claude-Henri A parametrically excited oscillator involving coupling between inclined cable system and deck of stayed bridges. (2009) In: Experimental Vibration Analysis for Civil Engineering Structures, 14-16 Oct 2009, Wroclaw, Poland . (Unpublished)

Bornert, Michel and Brémand, Fabrice and Doumalin, Pascal and Dupré, Jean-Christophe and Fazzini, Marina and Grédia, Michel and Hild, François and Mistou, Sébastien and Molimard, Jérôme and Orteu, Jean-José and Robert, Laurent and Surrel, Yves and Vacher, Pierre and Wattrisse, Bertrand Assessment of digital image correlation measurement errors: methodology and results. (2009) Experimental Mechanics, vol. 49 (n° 3). pp. 353-370. ISSN 0014-4851

Weiss, Ambrosius and Michel, Laurent and Mahdi, Stephane and Cross , Estelle and Barrau, Jean-Jacques Influence de la position dans l’épaisseur des reprises de plis sur le comportement statique et en fatigue pour un stratifié carbone/époxy + Influence of ply-drop position in thickness direction on static and fatigue loading behaviour of carbon fibre/ epoxy laminates. (2009) In: JNC16 - 16èmes Journées Nationales sur les Composites, 10-12 Jun 2009, Toulouse, France . (Unpublished)

Chaussumier, Michel and Shahzad, Majid and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad Influence du décapage sur la tenue en fatigue de l'alliage Al7010-T7451 traité par oxydation anodique chromique. (2009) In: CFM 2009 19ème Congrès Français de Mécanique, 24-28 Aug 2009, Marseille, France .

Bouvet, Christophe and Castanié, Bruno and Bizeul, Matthieu and Barrau, Jean-Jacques Low velocity impact modelling in laminate composite panels with discrete interface elements. (2009) International Journal of Solids and Structures, vol. 46 (n° 14-15). pp. 2809-2821. ISSN 0020-7683

Ledru, Yohann and Piquet, Robert and Michel, Laurent and Schmidt, Fabrice and Bernhart, Gérard Quantification 2-D et 3-D de la porosité par analyse d’images dans les matériaux composites stratifiés aéronautiques = 2-D and 3-D void quantification with image analyses in aeronautic composite laminates. (2009) In: JNC16 - 16èmes Journées Nationales sur les Composites, 10-12 Jun 2009, Toulouse, France . (Unpublished)

Castanié, Bruno and Aminanda, Yulfian and Bouvet, Christophe and Barrau, Jean-Jacques Core crush criterion to determine the strength of sandwich composite structures subjected to compression after impact. (2008) Composite Structures, vol. 8 (n° 1-3). pp. 243-250. ISSN 0263-8223

Castanié, Bruno and Bouvet, Christophe and Aminanda, Yulfian and Barrau, Jean-Jacques and Thévenet, Pascal Modelling of low-energy/low-velocity impact on Nomex honeycomb sandwich structures with metallic skins. (2008) International Journal of Impact Engineering, vol. 3 (n° 7). pp. 620-634. ISSN 0734-743X

Dirion, Jean-Louis and Reverte, Cédric and Cabassud, Michel Kinetic parameter estimation from TGA: Optimal design of TGA experiments. (2008) Chemical Engineering Research and Design, vol. 8 (n° 6). pp. 618-625. ISSN 0263-8762

Rishmany, Jihad and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad Simplified modelling of the behaviour of 3D-periodic structures such as aircraft heat exchangers. (2008) International Journal of Mechanical Sciences, vol. 5 (n° 6). pp. 1114-1122. ISSN 0020-7403

de Ryck, Alain and Ansart, Renaud and Dodds, John A. Granular flows down inclined channels with a strain-rate dependent friction coefficient. Part I: Non-cohesive materials. (2008) Granular Matter, vol. 10 (n° 5). pp. 353-360. ISSN 1434-7636

Mehanna, Maha and Délia, Marie-Line and Basséguy, Régine and Bergel, Alain Microbiol direct electron transfer: a new paradigm in anaerobic biocorrosion of steels? (2008) In: International Water Association Biofilm Technologies Conference IWA, 8-10 january 2008, Singapore .

Shah, Masood and Mabru, Catherine and Boher, Christine and Leroux, Sabine and Rezaï-Aria, Farhad An investigation of the crack propagation in tool steel X38CrMoV5(AISI H11) in SET specimens. (2008) In: JIP 2008 international conference on fatigue and plasticity : from mechanisms to design, 21 Mai 2008, Paris, France .

Michon, Guilhem and Berlioz, Alain and Lamarque, Claude-Henri Couplings in parametrically excited inclined cables systems. (2008) In: 12th Conference on Nonlinear Vibrations, 01-05 Jun 2008, VirginiaTech, United States . (Unpublished)

Herny, Emilie and Lours, Philippe and Andrieu, Eric and Cloué, Jean-Marc and Lagain, Philippe Evolution of microstructure and impact-strength energy in thermally and thermomechanically aged 15-5 PH. (2008) Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 222 (n° 4). pp. 299-304. ISSN 1464-4207

Ledru, Yohann and Piquet, Robert and Schmidt, Fabrice and Michel, Laurent and Bernhart, Gérard Modeling of voids growth mechanisms during manufacturing composite laminates. (2008) In: 9th International Conference on Flow Processes in Composite Materials - FPCM-9 (2008), 08-10 Jul 2008, Montréal, Canada . (Unpublished)

Shah, Masood and Boher, Christine and Rezaï-Aria, Farhad and Mabru, Catherine Propagation de fissure sur X38CrMoV5 sur éprouvettes à l'échelle réduite. (2008) In: Colloque National MECAMAT Procédés de transformation des matériaux de structure, 28-30 Jan 2008, Aussois, France .

Petit, Sandrine and Bouvet, Christophe and Bergerot, Alain and Barrau, Jean-Jacques Impact and compression after impact experimental study of a composite laminate with a cork thermal shield. (2007) Composites Science and Technology, vol. 6 (n° 15-). pp. 3286-3299 . ISSN 0266-3538

Batsale, Jean-Christophe and Dilhaire, Stefan and Fudym, O. and Gourdon, Christophe and Pradère, Christophe and Tasseli, Josiane and Toutain, Jean Projet inter-régional Aquitaine-Midi-Pyrénées « thermique et μfluidique» : Galerie de champs de températures associés à la caractérisation thermique sur des puces μfluidiques. (2007) In: 11ème Congrès de la Société Française de Génie des Procédés, 9-11 Oct 2007, Saint-Etienne .

Limido, Jérôme and Espinosa, Christine and Salaün, Michel and Mabru, Catherine and Chieragatti, Rémy High speed machining modelling : SPH method capabilities. (2007) In: 4th Smoothed Particle Hydrodynamics European Research Interest Community (SPHERIC) workshop, 27-29 May 2009, Nantes, France .

Reverte, Cédric and Dirion, Jean-Louis and Cabassud, Michel Kinetic model identification and parameters estimation from TGA experiments. (2007) Journal of Analytical and Applied Pyrolysis, vol. 7 (n° 1-2). pp. 297-305. ISSN 0165-2370

Prombut, P and Michel, Laurent and Barrau, Jean-Jacques Mixed-mode delamination of multidirectional composite laminates at 0°/θ° ply interfaces. (2006) In: 12th European Conference on Composite Materials, 29 Aug - 01 Sep 2006, Biarritz, France .

Carpentier, Alban and Michel, Laurent and Grihon, Stéphane and Barrau, Jean-Jacques Optimization methodology of composite panels. (2006) In: 12th European Conference on Composite Materials (ECCM 12), 29 Aug - 01 Sep 2006, Biarritz, France .

Carpentier, Alban and Michel, Laurent and Grihon , Stéphane and Barrau, Jean-Jacques Buckling optimization of composite panels via lay-up tables. (2006) In: III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering, 05-09 Jun 2006, Lisbon, Portugal .

Rishmany, Jihad and Renault, Lionel and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad Static and dynamic behaviour of a 3D periodic structure. (2006) In: 16th European Conference of Fracture : ECF 16 Failure Analysis of nano and engineering materials and structures, 03-07 Jul 2006, Alexandroupolis, Greece .

Peraldi, Raphaëlle and Monceau, Daniel and Pieraggi , Bernard Le nickel, matériau modèle pour les études d’oxydation à haute température : premiers pas vers une modélisation prédictive du phénomène. (2005) Revue de Métallurgie (n° 2). pp. 135-146. ISSN 0035-1563

Suraratchai, Monchai and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad Influence de gammes d'usinage sur la tenue en fatigue d'un alliage léger aéronautique. (2005) In: CFM 2005 : 17ème Congrès Français de Mécanique, 29 Aug - 02 Sep 2005, Troyes, France .

Vialas, Nadia and Monceau, Daniel and Pieraggi , Bernard Effect of Cycle Frequency on High Temperature Oxidation Behavior of Alumina-forming Coatings Used for Industrial Gas Turbine Blades. (2004) Materials Science Forum , vol. 461 - 4 . pp. 747-754. ISSN 0255-5476

Didierjean, Sébastien and Michel, Laurent and Barrau, Jean-Jacques and Paroissien, Eric Predicting the behavior of graphite/epoxy laminates under hydrothermal loads. (2003) In: EUROMECH 453 Internal Stresses in Polymer Composite Processing and Service Life, 01-03 Dec 2003, Saint-Etienne, France .

Castanié, Bruno. Contribution à l'étude des structures sandwichs dissymétriques. PhD, Ecole Nationale Supérieure de l'Aéronautique et de l'Espace, 2000, 208 p.

Lours, Philippe and Alexis, Joël and Bernhart, Gérard Oxidation resistance of ODS alloy PM2000 from 880°C to 1400°C. (1998) Journal of Materials Science Letters, vol. 17 (n° 13). pp. 1089-1093. ISSN 0261-8028

Lachaud, Frédéric. Délaminage de matériaux composites à fibres de carbone et à matrices organiques : étude numérique et expérimentale, suivi par émission acoustique. PhD, Génie Mécanique, Institut Superieur de l'Aéronautique et de l'Espace, 1997

This list was generated on Fri Oct 31 19:28:42 2014 CET.