OATAO - Open Archive Toulouse Archive Ouverte Open Access Week

Items where Laboratory is "Laboratoire Génie de Production - LGP (Tarbes, France)"

Up a level
Export as [feed] RSS 1.0 [feed] Atom [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 370.

Article

Romero Bejarano, Juan Camilo and Coudert, Thierry and Vareilles, Elise and Geneste, Laurent and Aldanondo, Michel and Abeille, Joël Case-based reasoning and system design: An integrated approach based on ontology and preference modeling. (2014) Artificial Intelligence for Engineering Design, Analysis and Manufacturing, vol. 28 (n° 1). pp. 49-69. ISSN 0890-0604

Ming, Yue and Grabot, Bernard and Houé Ngouna, Raymond A typology of the situations of cooperation in supply chains. (2014) Computers & Industrial Engineering, vol. 67 . pp. 56-71. ISSN 0360-8352

Mandrile, Sébastien and Cazenave-Larroche, Gilles and Vernault, Cyril and Dessein, Gilles and Denape, Jean and Paris, Jean-Yves Development of an in-house cutting forces simulation for fir tree broaching process. (2014) International Journal of Machining and Machinability of Materials, vol. 15 (n° 1/2). pp. 18-35. ISSN 1748-5711

Kamsu Foguem, Bernard and Mathieu, Yvan Software architecture knowledge for intelligent light maintenance. (2014) Advances in Engineering Software, vol. 67 . pp. 125-135. ISSN 0965-9978

Munoz, Victor and Perrin, Marianne and Pastor, Marie-Laetitia and Welemane, Hélène and Cantarel, Arthur and Karama, Moussa Application of non destructive testing to the detection of aeronautical defects in composite structure. (2013) Nonconventional Technologies Review . ISSN 1454-3087

Amiot, Fabien and Bornert, Michel and Doumalin, Pascal and Dupré, Jean-Christophe and Fazzini, Marina and Orteu, Jean-José and Poilane, Christophe and Robert, Laurent and Rotinat, René and Toussaint, Eveline and Wattrisse, Bertrand and Wienin, Jean-Samuel Assessment of digital image correlation measurement accuracy in the ultimate error regime: main results of a collaborative benchmark. (2013) Strain, vol. 49 (n°6). pp. 483-496. ISSN 1475-1305

Fillatreau, Philippe and Fourquet, Jean-Yves and Le Bolloc'h, Romain and Cailhol, Simon and Datas, Adrien and Puel, Bernard Using virtual reality and 3D industrial numerical models for immersive interactive checklists. (2013) Computers in Industry, vol. 64 (n° 9). pp. 1253-1262. ISSN 0166-3615

Jabrouni, Hicham and Kamsu Foguem, Bernard and Geneste, Laurent and Vaysse, Christophe Analysis reuse exploiting taxonomical information and belief assignment in industrial problem solving. (2013) Computers in Industry, vol. 64 (n° 8). pp. 1035-1044. ISSN 0166-3615

Kamsu Foguem, Bernard and Noyes, Daniel Graph-based reasoning in collaborative knowledge management for industrial maintenance. (2013) Computers in Industry, vol. 64 . pp. 998-1013. ISSN 0166-3615

Guillaume, Romain and Grabot, Bernard and Thierry, Caroline Management of the risk of backorders in a MTO-ATO / MTS context under imperfect requirements. (2013) Applied Mathematical Modelling . ISSN 0307-904X

Potes Ruiz, Paula Andrea and Kamsu Foguem, Bernard and Noyes, Daniel Knowledge reuse integrating the collaboration from experts in industrial maintenance management. (2013) Knowledge-Based Systems, vol. 50 . pp. 171-186. ISSN 0950-7051

Datas, Adrien and Chiron, Pascale and Fourquet, Jean-Yves An SVD approach to reaching tasks based on cartesian geodesics. (2013) Computer Methods in Biomechanics and Biomedical Engineering, Vol. 16 (n° 1). pp. 63-65. ISSN 1025-5842

Proton, Vincent and Alexis, Joël and Andrieu, Eric and Delfosse, Jérôme and Lafont, Marie-Christine and Blanc, Christine Characterisation and understanding of the corrosion behaviour of the nugget in a 2050 aluminium alloy Friction Stir Welding joint. (2013) Corrosion Science, vol. 73 . pp. 130-142. ISSN 0010-938X

Abbassi, Fethi and Mistou, Sébastien and Zghal, Ali Failure analysis based on microvoid growth for sheet metal during uniaxial and biaxial tensile tests. (2013) Materials & Design, vol. 49 . pp. 638-646. ISSN 0261-3069

Garnier, Christian and Pastor, Marie-Laetitia and Lorrain, Bernard and Pantalé, Olivier Fatigue behaviour of impacted composite structures. (2013) Composite Structures, vol. 100 . pp. 443-450. ISSN 0263-8223

Saab, Layale and Ramos, Oscar E. and Keith, François and Mansard, Nicolas and Souères, Philippe and Fourquet, Jean-Yves Dynamic whole-body motion generation under rigid contacts and other unilateral constraints. (2013) IEEE Transactions on Robotics, vol. 29 (n° 2). pp. 346-362. ISSN 1552-3098

Kamsu Foguem, Bernard and Diallo, Gayo and Foguem, Clovis Conceptual graph-based knowledge representation for supporting reasoning in African traditional medicine. (2013) Engineering Applications of Artificial Intelligence, vol. 26 (n° 4). pp. 1348-1365. ISSN 0952-1976

Coudert, Thierry and Houé Ngouna, Raymond Editorial of the Special Section: Anticipation of risks impacts and industrial performance evaluation in distributed organizations life cycles. (2013) International Journal of Production Economics, vol. 142 (n° 2). pp. 213 - 213. ISSN 0925-5273

Gassara, Bassem and Baili, Maher and Dessein, Gilles and Hbaieb, Moncef and Bouzid Saï, Wassila Feed rate modeling in circular–circular interpolation discontinuity for high-speed milling. (2013) The International Journal of Advanced Manufacturing Technology, vol. 65 (n° 9 -12). pp. 1619-1634. ISSN 0268-3768

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Lacroix, Loïc and Odemer, Grégory and Blanc, Christine Investigation of Kelvin probe force microscopy efficiency for the detection of hydrogen ingress by cathodic charging in an aluminium alloy. (2013) Scripta Materialia, vol. 68 (n° 7). pp. 479-482. ISSN 1359-6462

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Odemer, Grégory and Blanc, Christine The contribution of hydrogen to the corrosion of 2024 aluminium alloy exposed to thermal and environmental cycling in chloride media. (2013) Corrosion Science, vol. 69 . pp. 211-220. ISSN 0010-938X

Fourcade, Thibaut and Broue, Adrien and Dehnnin, Jeremie and Desmarres, Jean-Michel and Seguineau, Cédric and Dalverny, Olivier and Alexis, Joël and Masri, Talal Validation of mechanical damage monitoring on aluminium freestanding thin films using electrical measurements. (2013) Key Engineering Materials, vol. 550 . pp. 157-164. ISSN 1013-9826

Abbassi, Fethi and Belhadj, Touhami and Mistou, Sébastien and Zghal, Ali Parameter identification of a mechanical ductile damage using Artificial Neural Networks in sheet metal forming. (2013) Materials & Design, vol. 45 . pp. 605-615. ISSN 0261-3069

Yahiaoui, Malik and Gerbaud, Laurent and Paris, Jean-Yves and Denape, Jean and Dourfaye, Alfazazi A study on PDC drill bits quality. (2013) Wear, vol. 298-299 . pp. 32-41. ISSN 0043-1648

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Lacroix, Loïc and Odemer, Grégory and Blanc, Christine Combined Kelvin probe force microscopy and secondary ion mass spectrometry for hydrogen detection in corroded 2024 aluminium alloy. (2013) Electrochimica Acta . ISSN 0013-4686

Brault, Romain and Germaneau, Arnaud and Dupré, Jean-Christophe and Doumalin, Pascal and Mistou, Sébastien and Fazzini, Marina In-situ Analysis of Laminated Composite Materials by X-ray Micro-Computed Tomography and Digital Volume Correlation. (2013) Experimental Mechanics . ISSN 0014-4851

Mousseigne, Michel and Landon, Yann and Seguy, Sébastien and Dessein, Gilles and Redonnet, Jean-Max Predicting the dynamic behaviour of torus milling tools when climb milling using the stability lobes theory. (2013) International Journal of Machine Tools and Manufacture, vol. 65 . pp. 47-57. ISSN 0890-6955

Goidescu, Cristina and Welemane, Hélène and Kondo, Djimédo and Gruescu, Cosmin Microcracks closure effects in initially orthotropic materials. (2013) European Journal of Mechanics - A/Solids, vol. 37 . pp.172-184. ISSN 0997-7538

Nouasse, Houda and Chiron, Pascale and Archimède, Bernard A flood lamination strategy based on transportation network with time delay. (2013) Water Science and Technology, vol. 68 (n° 8). pp. 1688-1696. ISSN 0273-1223

Kamsu Foguem, Bernard and Tafin Kampé, Karine Acute osteomyelitis due to Staphylococcus aureus in children: what is the status of treatment today? (2013) Pediatric Infectious Disease, vol. 5 (n° 3). pp. 122-126. ISSN 2212-8328

Gassara, Bassem and Dessein, Gilles and Baili, Maher and Hbaieb, Moncef and Saï, Wassila Bouzid Analytical and experimental study of feed rate in high-speed milling. (2013) Machining Science and Technology, vol. 17 (n° 2). pp. 181-208. ISSN 1091-0344

Radutoiu, Nicoleta and Alexis, Joël and Lacroix, Loïc and Abrudeanu, Marioara and Petit, Jacques-Alain Application of Kelvin probe Force Microscopy (KFM) to evidence localized corrosion of over-aged aeronautical 2024 aluminum alloy. (2013) International Journal Key Engineering Materials , vol. 550 . pp. 127-134. ISSN 1013-9826

Tchangani, Ayeley Bipolar aggregation method for fuzzy nominal classification using Weighted Cardinal Fuzzy Measure (WCFM). (2013) Journal of Uncertain Systems, vol. 7 (n° 2). pp. 138-151. ISSN 1752-8909

Le Dref, John and Eyma, Florent and Dessein, Gilles and Denaud, Louis Etienne and Landon, Yann Comparative study of tools in drilling composites T700-M21 and T800-M21. (2013) Advanced Materials Research, vol. 698 . pp. 59-68. ISSN 1662-8985

Goidescu, Cristina and Welemane, Hélène and Garnier, Christian and Fazzini, Marina and Brault, Romain and Péronnet, Elodie and Mistou, Sébastien Damage investigation in CFRP composites using full-field measurement techniques: combination of digital image stereo-correlation, infrared thermography and X-ray tomography. (2013) Composites Part B: Engineering, vol. 48 . pp. 95-105. ISSN 1359-8368

Alexis, Joël and Gaussens, Clélia and Etcheverry, Bernard and Bonino, Jean-Pierre Development of nickel phosphorus coatings containing micro particles of talc phyllosilicates. (2013) Materials Chemistry and Physics (n° 137 ). pp. 723-733. ISSN 0254-0584

Pantalé, Olivier and Gueye, Babacar Influence of the constitutive flow law in FEM simulation of the Radial forging process. (2013) Journal of Engineering, vol. 2013 . pp. 1-8.

Gassara, Bassem and Dessein, Gilles and Baili, Maher and Hbaieb, Moncef and Bouzid Saï, Wassila Kinematic behaviour modeling of the axes of a machining center in high speed milling. (2013) Advanced Materials Research, vol. 698 . pp. 39-48. ISSN 1022-6680

Kamsu Foguem, Bernard and Rigal, Fabien and Mauget, Félix Mining association rules for the quality improvement of the production process. (2013) Expert Systems with Applications, vol. 40 (n° 4). pp. 1034-1045. ISSN 0957-4174

Péronnet, Elodie and Pastor, Marie-Laetitia and Huillery, Richard and Dalverny, Olivier and Mistou, Sébastien and Karama, Moussa and Génot, Sylvain Non destructive investigation of defects in composite structures by fullfield measurement methods. (2013) Key Engineering Materials, vol. 550 . pp. 135-142. ISSN 1013-9826

Rodrigues Vaz, Caroline and Grabot, Bernard and Uriona Maldonado, Mauricio and Selig, Paulo Mauricio Some reasons to implement reverse logistics in companies. (2013) International Journal of Environmental Technology and Management (IJETM), vol. 16 (n° 5/6). pp. 467-479. ISSN 1466-2132

Radutoiu, Nicoleta and Alexis, Joël and Lacroix, Loïc and Abrudeanu, Marioara and Petit, Jacques-Alain Study of the influence of the artificial ageing temperature on the AA2024 alloy microstructure. (2013) Key Engineering Materials, vol. 550 . pp. 115-125. ISSN 1013-9826

Archimède, Bernard and Letouzey, Agnès and Memon, Muhammad Ali and Xu, Jiucheng Towards a distributed multi-agent framework for shared resources scheduling. (2013) Journal of Intelligent Manufacturing . ISSN 0956-5515

Noureddine, Farid Une expérience pédagogique autour d’un robot industriel. (2013) J3eA, vol. 12 . pp. 1-16. ISSN 1638-5705

Kamsu Foguem, Bernard and Tchuenté Foguem, Germaine and Allart, Laurent and Zennir, Youcef and Vilhelm, Christian and Mehdaoui, Hossein and Zitouni, Djamel and Hubert, Hervé and Lemdani, Mohamed and Ravaux, Pierre User-centered visual analysis using a hybrid reasoning architecture for intensive care units. (2012) Decision Support Systems, vol. 54 (n° 1). pp. 496-509. ISSN 0167-9236

Lacroix, Loïc and Blanc, Christine and Pébère, Nadine and Thompson, George and Tribollet, Bernard and Vivier, Vincent Simulating the galvanic coupling between S-Al2CuMg phase particles and the matrix of 2024 aerospace aluminium alloy. (2012) Corrosion Science, vol. 64 . pp. 213-221. ISSN 0010-938X

Dienot, Jean-Marc Investigations on electromagnetic noises and interactions in electronic architectures : a tutorial case on a mobile system. (2012) Mediterranean Telecommunications Journal .

Kamsu Foguem, Bernard Knowledge-based support in Non-Destructive Testing for health monitoring of aircraft structures. (2012) Advanced Engineering Informatics, vol. 26 (n° 4). pp. 859-869. ISSN 1474-0346

Kamsu Foguem, Bernard and Simeu, Emmanuel Optimizing construction of scheduled data flow graph for on-line testability. (2012) The Mediterranean Journal of Computers and Networks, vol. 8 (n° 4). pp. 125-133. ISSN 1744-2397

Saab, Layale and Souères, Philippe and Mansard, Nicolas and Fourquet, Jean-Yves Generation of human-like motion on anthropomorphic systems using inverse dynamics. (2012) Computer Methods in Biomechanics and Biomedical Engineering, vol. 15 (sup. 1). pp.156-158. ISSN 1025-5842

Koné, Sodjan and Schneider, Henri and Isoird, Karine and Thion, Fabien and Achard, Jocelyn and Issaoui, Riadh and Msolli, Sabeur and Alexis, Joël An assessment of contact metallization for high power and high temperature diamond Schottky devices. (2012) Diamond and Related Materials, vol. 27-28 . pp. 23-28. ISSN 0925-9635

Medjahed, Hassen and Vidal, Paul-Etienne and Nogarède, Bertrand Thermo-mechanical stress of bonded wires used in high power modules with alternating and direct current modes. (2012) Microelectronics Reliability, vol. 52 (n° 6). pp. 1099-1104. ISSN 0026-2714

Péronnet, Elodie and Eyma, Florent and Welemane, Hélène and Mistou, Sébastien Characterization and comparison of defects detection limits of ultrasonic non destructive techniques. (2012) Key Engineering Materials, vol. 498 . pp. 79-88. ISSN 1013-9826

Perret, Adrien and Mistou, Sébastien and Fazzini, Marina and Brault, Romain Global behaviour of a composite stiffened panel in buckling. Part 2: Experimental investigation. (2012) Composite Structures, vol. 94 (n° 2). pp. 376-385. ISSN 0263-8223

Delbé, Karl and Orozco Gomez, Solisabel and Carrillo Mancuso, Juan Manuel and Paris, Jean-Yves and Denape, Jean Tribological behaviour of stellite matrix composites for high temperatures applications. (2012) Key Engineering Materials, Vol. 498 . pp. 89-101. ISSN 1662-9795

Smaoui, Moez and Bouaziz, Zoubeir and Zghal, Ali and Baili, Maher and Dessein, Gilles Compensation of a ball end tool trajectory in complex surface milling. (2012) International Journal of Machining and Machinability of Materials, vol. 11 (n° 1). pp. 51-68. ISSN 1748-5711

Delbé, Karl and Mansot, Jean-Louis and Thomas, Philippe and Baranek, Philippe and Boucher, Florent and Vangelisti, Rene and Billaud, Denis Contribution to the understanding of tribological properties of graphite intercalation compounds with metal chloride. (2012) Tribology Letters, vol. 47 (n° 3). pp. 367-379. ISSN 1023-8883

Senatore, Johanna and Segonds, Stéphane and Rubio, Walter and Dessein, Gilles Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones. (2012) Computer-Aided Design, vol. 44 (n° 12). pp. 1151-1160. ISSN 00104485

Radutoiu, Nicoleta and Alexis, Joël and Lacroix, Loïc and Petit, Jacques-Alain and Abrudeanu, Marioara and Rizea, Vasile and Vulpe, Sanda Effect of the over-ageing treatment on the mechanical properties of AA2024 aluminum alloy. (2012) Revista de chimie (chemistry magazine), Vol. 63 (n°10). pp. 1042-1045.

Msolli, Sabeur and Dalverny, Olivier and Alexis, Joël and Karama, Moussa Effects of the Unified Viscoplastic Formulation and Temperature Terms on the Thermomechanical Behavior of Soldering Materials. (2012) Key Engineering Materials, vol. 498 . pp. 219-226. ISSN 1662-9795

Msolli, Sabeur and Dalverny, Olivier and Alexis, Joël and Karama, Moussa Experimental and mechanical characterizations of a lead free solder alloy for electronic devices. (2012) Advanced Materials Research, vol. 423 . pp. 210-217. ISSN 1022-6680

Vareilles, Elise and Aldanondo, Michel and Codet de Boisse, Aurélien and Coudert, Thierry and Gaborit, Paul and Geneste, Laurent How to take into account general and contextual knowledge for interactive aiding design: Towards the coupling of CSP and CBR approaches. (2012) Engineering Applications of Artificial Intelligence, vol. 25 (n° 1). pp. 31 - 47. ISSN 0952-1976

Popa, Andreï and Dessein, Gilles and Baili, Maher and Dutilh, Vincent Investigation of tool failure modes and machining disturbances using monitoring signals. (2012) Advanced Materials Research, vol. 423 . pp. 128-142. ISSN 1022-6680

Abbassi, Fethi and Gherissi, Abderraouf and Zghal, Ali and Mistou, Sébastien and Alexis, Joël Micro-Scale Modeling of Carbon-Fiber Reinforced Thermoplastic Materials. (2012) Applied Mechanics and Materials, vol. 146 . pp. 1-11. ISSN 1662-7482

Msaddek, El Bechir and Bouaziz, Zoubeir and Dessein, Gilles and Baili, Maher Optimization of pocket machining strategy in HSM. (2012) The International Journal of Advanced Manufacturing Technology, vol. 62 (n° 1-4). pp. 69-81. ISSN 0268-3768

Gourc, Etienne and Seguy, Sébastien and Arnaud, Lionel Chatter milling modeling of active magnetic bearing spindle in high-speed domain. (2011) International Journal of Machine Tools and Manufacture, vol. 51 (n° 12). pp. 928-936. ISSN 0890-6955

Jabrouni, Hicham and Kamsu Foguem, Bernard and Geneste, Laurent and Vaysse, Christophe Continuous Improvement Through Knowledge-Guided Analysis in Experience Feedback. (2011) Engineering Applications of Artificial Intelligence, 24 (8). pp. 1419-1431. ISSN 0952-1976

Desforges, Xavier and Habbadi, Abdallah and Archimède, Bernard Design methodology for smart actuator services for machine tool and machining control and monitoring. (2011) Robotics and Computer-Integrated Manufacturing, vol. 27 (n° 6). pp. 963-976. ISSN 0736-5845

Cazajus, Vincent and Seguy, Sébastien and Welemane, Hélène and Karama, Moussa Residual stresses in a ceramic-metal composite. (2011) Applied Mechanics and Materials, vol. 146 . pp. 185-196. ISSN 1662-7482

Abbassi, Fethi and Elfaleh, Issam and Mistou, Sébastien and Zghal, Ali and Fazzini, Marina and Djilali, Toufik Experimental and numerical investigations of a thermoplastic composite (carbon/PPS) thermoforming. (2011) Structural Control and Health Monitoring, vol. 18 (n° 7). pp. 769-780. ISSN 1545-2255

Welemane, Hélène and Dehmous, Hocine Reliability analysis and micromechanics: A coupled approach for composite failure prediction. (2011) International Journal of Mechanical Sciences, vol. 53 (n° 11). pp. 935-945. ISSN 0020-7403

Balcaen, Yannick and Radutoiu, Nicoleta and Alexis, Joël and Béguin, Jean-Denis and Lacroix, Loïc and Samélor, Diane and Vahlas, Constantin Mechanical and barrier properties of MOCVD processed alumina coatings on Ti6Al4V titanium alloy. (2011) Surface and Coatings Technology, vol. 206 (n° 7). pp. 1684-1690. ISSN 0257-8972

Smaoui, Moez and Bouaziz, Zoubeir and Zghal, Ali and Dessein, Gilles and Baili, Maher Simulation of the deflected cutting tool trajectory in complex surface milling. (2011) The International Journal of Advanced Manufacturing Technology, vol. 56 (n° 5-8). pp. 463-474. ISSN 0268-3768

Zéanh, Adrien and Dalverny, Olivier and Bouzourene, Arezki and Bruzy, Christophe Structural reliability methods applied to power switch devices: Example of an aeronautical IGBT module. (2011) Journal of Mechanical Design, vol. 133 (n° 9). pp. 1-9. ISSN 1050-0472

Perret, Adrien and Mistou, Sébastien and Denaud, Louis Etienne and Mollé, Thierry and Veyrac, Claudia and Karama, Moussa Numerical modelling of a composite fuselage manufactured by liquid resin infusion. (2011) Applied Mechanics and Materials, vol. 62 . pp.49-56. ISSN 1662-7482

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles Modeling and simulation of high-speed milling centers dynamics. (2011) The International Journal of Advanced Manufacturing Technology, vol. 53 (n ° 9-12). pp. 877-888. ISSN 0268-3768

Dehmous, Hocine and Welemane, Hélène Multi-scale reliability analysis of composite structures – Application to the Laroin footbridge. (2011) Engineering Failure Analysis, vol. 18 (n° 3). pp. 988-998. ISSN 1350-6307

Proton, Vincent and Alexis, Joël and Andrieu, Eric and Blanc, Christine and Delfosse, Jérôme and Lacroix, Loïc and Odemer, Grégory Influence of Post-Welding Heat Treatment on the Corrosion Behavior of a 2050-T3 Aluminum-Copper-Lithium Alloy Friction Stir Welding Joint. (2011) Journal of The Electrochemical Society (JES), vol. 158 (n° 5). pp. C139-C147. ISSN 0013-4651

Duviella, Eric and Chiron, Pascale and Charbonnaud, Philippe A reactive control strategy for networked hydrographical system management. (2011) Control Engineering Practice, vol. 19 (n° 8). pp. 851-861. ISSN 0967-0661

Samélor, Diane and Lazar, Ana-Maria and Aufray, Maëlenn and Tendero, Claire and Lacroix, Loïc and Béguin, Jean-Denis and Caussat, Brigitte and Vergnes, Hugues and Alexis, Joël and Poquillon, Dominique and Pébère, Nadine and Gleizes, Alain and Vahlas, Constantin Amorphous alumina oatings: processing, structure and remarkable barrier properties. (2011) Journal of Nanoscience and Nanotechnology (JNN), vol. 11 (n° 9). pp. 8387-8391(5). ISSN 1533-4880

Baili, Maher and Wagner, Vincent and Dessein, Gilles and Sallabery , Julien and Lallement, Daniel An Experimental Investigation of Hot Machining with Induction to Improve Ti-5553 Machinability. (2011) Applied Mechanics and Materials, vol. 62 . pp. 67-76. ISSN 1660-9336

Péronnet, Elodie and Eyma, Florent and Pastor, Marie-Laetitia and Welemane, Hélène Caractérisation et comparaison des limites de détection de techniques de contrôle non destructif : méthodes ultrasonores et méthodes optiques. (2011) Contrôles-Essais-Mesures, Vol. 37 . pp. 63-68. ISSN 1637-4657

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Blanc, Christine and Odemer, Grégory and Salabura, Jean-Claude Corrosion Damages Induced by Cyclic Exposure of 2024 Aluminum Alloy in Chloride-Containing Environments. (2011) Journal of The Electrochemical Society (JES), vol. 158 (n° 6). pp. C284-C295. ISSN 0013-4651

Campa, Francisco Javier and López de Lacalle, Luis Norberto and Urbicain, Gorka and Lamikiz, Aitzol and Seguy, Sébastien and Arnaud, Lionel Critical thickness and dynamic stiffness for chatter avoidance in thin floors milling. (2011) Advanced Materials Research, vol. 188 . pp. 116-121. ISSN 1662-8985

Gourc, Etienne and Seguy, Sébastien and Dessein, Gilles Dynamical modeling of spindle with active magnetic bearing for milling process. (2011) Advanced Materials Research, vol. 423 . pp. 200-209. ISSN 1662-8985

Wagner, Vincent and Baili, Maher and Dessein, Gilles and Lallement, Daniel Experimental study of coated carbide tools behaviour: application for Ti-5-5-5-3 turning. (2011) International Journal of Machining and Machinability of Materials, Vol.9 (n° 3/4). pp. 233-248. ISSN 1748-5711

Perret, Adrien and Mistou, Sébastien and Fazzini, Marina Global behaviour of a composite stiffened panel in buckling. Part 1: Numerical modelling. (2011) Composite Structures, vol. 93 (n° 10). pp. 2610-2618. ISSN 0263-8223

Orozco Gomez, Solisabel and Delbé, Karl and Benitez, Alberto and Paris, Jean-Yves and Denape, Jean High temperature tribological behaviour of metal matrix composites produced by SPS. (2011) Key Engineering Materials, vol. 482 . pp. 89-100. ISSN 1662-9795

Fazzini, Marina and Dalverny, Olivier and Mistou, Sébastien Identification of materials properties using displacement field measurement. (2011) Key Engineering Materials, vol. 482 . pp. 57-65. ISSN 1013-9826

Garnier, Christian and Djilali, Toufik and Brault, Romain and Mistou, Sébastien Impact resistance of composite materials under biaxal preloading. (2011) Key Engineering Materials, vol. 482 . pp. 39-48. ISSN 1013-9826

Msolli, Sabeur and Dalverny, Olivier and Alexis, Joël and Karama, Moussa Implicit integration scheme for porous viscoplastic potential-based constitutive equations. (2011) Procedia Engineering, vol. 10 . pp. 1544-1549. ISSN 1877-7058

Travieso-Rodríguez, Jose Antonio and Dessein, Gilles and González-Rojas, Hernan Alberto Improving the surface finish of concave and convex surfaces using a ball burnishing process. (2011) Materials and Manufacturing Processes, vol. 26 (n°12). pp. 1494-1502. ISSN 1042-6914

Guillaume, Romain and Thierry, Caroline and Grabot, Bernard Modelling of ill-known requirements and integration in production planning. (2011) Production Planning and Control, vol. 2 (n° 4). pp. 336-352. ISSN 0953-7287

Arnaud, Lionel and Gonzalo, Oscar and Seguy, Sébastien and Jauregi, Haritz and Peigné, Grégoire Simulation of low rigidity part machining applied to thin-walled structures. (2011) The International Journal of Advanced Manufacturing Technology, vol. 54 (n° 5-8). pp. 479-488. ISSN 0268-3768

Seguy, Sébastien and Insperger, Tamás and Arnaud, Lionel and Dessein, Gilles and Peigné, Grégoire Suppression of period doubling chetter in high-speed milling by spindle speed variation. (2011) Machining Science and Technology, vol. 15 (n° 2). pp. 153-171. ISSN 1091-0344

Garnier, Christian and Pastor, Marie-Laetitia and Eyma, Florent and Lorrain, Bernard The detection of aeronautical defects in-situ on composite structures using Non Destructive Testing. (2011) Composite Structures, vol. 93 . pp. 1328-1336. ISSN 0263-8223

Larignon, Céline and Alexis, Joël and Andrieu, Eric and Baret-Blanc, Christine and Odemer, Grégory Evaluation of the Local Chloride Concentration and the Local Mechanical Stresses in Intergranular Damages Grown on a 2024 Aluminum Alloy. (2010) ECS Transactions , vol. 33 (n° 35). pp. 39-51. ISSN 1938-5862

Pastor, Marie-Laetitia and Garnier, Christian and Pescay, Christophe Comparison of two non destructive tests in carbon/epoxy composites. (2010) Journal of Materials Science and Engineering, vol. 4 (n° 10). ISSN 1934-8959

Stempflé, Philippe and Pantalé, Olivier and Djilali, Toufik and Njiwa, Richard Kouitat and Bourrat, Xavier and Takadoum, Jamal Evaluation of the real contact area in three-body dry friction by micro-thermal analysis. (2010) Tribology International, vol. 43 (n° 10). pp. 1794-1805. ISSN 0301-679X

Popescu, Téodor and Alexis, Joël Recherches concernant le comportement des aciers revêtus au frottement sec et à haute température. (2010) Traitements & Matériaux (n°404-405). pp. 33-36.

Abbassi, Fethi and Pantalé, Olivier and Mistou, Sébastien and Zghal, Ali and Rakotomalala, Roger Effect of Ductile Damage Evolution in Sheet Metal Forming: Experimental and Numerical Investigations. (2010) Key Engineering Materials, vol. 446 . pp. 157-169. ISSN 1662-9795

Brault, Romain and Niquet, Michel and Mistou, Sébastien Experimental and numerical modelling of LRI process. (2010) Key Engineering Materials, vol. 446 . pp. 121-130. ISSN 1662-9795

Stempflé, Philippe and Pantalé, Olivier and Rousseau, Marthe and Lopez, Evelyne and Bourrat, Xavier Mechanical properties of the elemental nanocomponents of nacre structure. (2010) Materials Science and Engineering: C, vol. 30 (n° 5). pp. 715-721. ISSN 0928-4931

Germaneau, Arnaud and Peyruseigt, François and Mistou, Sébastien and Doumalin, Pascal and Dupré, Jean-Christophe 3D mechanical analysis of aeronautical plain bearings: Validation of a finite element model from measurement of displacement fields by digital volume correlation and optical scanning tomography. (2010) Optics and Lasers in Engineering, vol. 48 (n° 6). pp. 676-683. ISSN 0143-8166

Seguy, Sébastien and Insperger, Tamás and Arnaud, Lionel and Dessein, Gilles and Peigné, Grégoire On the stability of high-speed milling with spindle speed variation. (2010) The International Journal of Advanced Manufacturing Technology, vol. 48 (n° 9-12). pp. 883-895. ISSN 0268-3768

Civrac de Fabian, Gabriel and Msolli, Sabeur and Alexis, Joël and Dalverny, Olivier and Schneider, Henri Electrical and mechanical characterisation of Si/Al ohmic contacts on diamond. (2010) IEEE Electronics Letters , vol. 46 (n° 11). pp. 791-793. ISSN 0013-5194

Welemane, Hélène and Goidescu, Cristina Isotropic brittle damage and unilateral effect. (2010) Comptes Rendus Mécanique, vol. 338 (n° 5). pp. 271-276. ISSN 1631-0721

Alexis, Joël and Etcheverry, Bernard and Béguin, Jean-Denis and Bonino, Jean-Pierre Structure, morphology and mechanical properties of electrodeposited composite coatings Ni–P/SiC. (2010) Materials Chemistry and Physics, vol. 120 (n° 2-3). pp. 244-250. ISSN 0254-0584

Cormery, Fabrice and Welemane, Hélène A stress-based macroscopic approach for microcracks unilateral effect. (2010) Computational Materials Science, vol. 47 (n° 3). pp. 727-738. ISSN 0927-0256

Seguy (Garcia), Anne and Noyes, Daniel and Clermont, Philippe Characterisation of collaborative decision making processes. (2010) International Journal of Computer Integrated Manufacturing, vol. 23 (n°11). pp.1046-1058. ISSN 0951-192X

Fazzini, Marina and Mistou, Sébastien and Karama, Moussa and Desmars, Bruno Digital image stereo-correlation applied to the identification of elastomers. (2010) Advanced Materials Research, vol. 112 . pp. 103-112. ISSN 1662-8985

Wagner, Vincent and Baili, Maher and Dessein, Gilles and Lallement, Daniel Experimental characterization of behavior laws for titanium alloys: application to Ti5553. (2010) Key Engineering Materials, vol. 446 . pp. 147-155. ISSN 1662-9795

Pitiot, Paul and Coudert, Thierry and Geneste, Laurent and Baron, Claude Hybridation of Bayesian networks and evolutionary algorithms for multi-objective optimization in an integrated product design and project management context. (2010) Engineering Applications of Artificial Intelligence, vol. 23 (n° 5). pp. 830 - 843. ISSN 0952-1976

Garnier, Christian and Mistou, Sébastien and Pantalé, Olivier Influence of Process and Material Parameters on Impact Response in Composite Structure: Methodology Using Design of Experiments. (2010) Key Engineering Materials, vol. 446 . pp. 83-90. ISSN 1013-9826

Dutilh, Vincent and Dessein, Gilles and Alexis, Joël and Perrin, Géraldine Links Between Machining Parameters and Surface Integrity in Drilling Ni-Superalloy. (2010) Advanced Materials Research, vol. 112 . pp. 171-178. ISSN 1662-8985

Mistou, Sébastien and Fazzini, Marina and Karama, Moussa Shear Test on CFRP Full-Field Measurement and Finite Element Analysis. (2010) Advanced Materials Research, vol. 112 . pp. 49-62. ISSN 1022-6680

Arnaud, Lionel Vibrations d'usinage : la bête noire de l'usinage. (2010) Revue la forge . ISSN 1623-7307

Fazzini, Marina and Mistou, Sébastien and Dalverny, Olivier and Robert, Laurent Study of image characteristics on digital image correlation error assessment. (2009) Optics and Lasers in Engineering, vol. 48 . pp. 335-339. ISSN 0143-8166

Yantio Njankeu Sabeya, Ghislain Roméo and Paris, Jean-Yves and Denape, Jean Utility of a fretting device working under free displacement. (2009) Tribology International, vol. 42 (n° 9). pp.1330-1339. ISSN 0301-679X

Claverie, Fanny and Fernandez Garcia, Beatriz and Pécheyran, Christophe and Alexis, Joël and Donard, Olivier F. X. Elemental fractionation effects in high repetition rate IR femtosecond laser ablation ICP-MS analysis of glasses. (2009) Journal of Analytical Atomic Spectrometry, vol. 24 (n° 7). pp. 891-902. ISSN 0267-9477

Houé Ngouna, Raymond and Grabot, Bernard Assessing the compliance of a product with an eco-label: from standards to constraints. (2009) International Journal of Production Economics, vol. 121 (n° 1). pp. 21-38. ISSN 0925-5273

Bornert, Michel and Brémand, Fabrice and Doumalin, Pascal and Dupré, Jean-Christophe and Fazzini, Marina and Grédia, Michel and Hild, François and Mistou, Sébastien and Molimard, Jérôme and Orteu, Jean-José and Robert, Laurent and Surrel, Yves and Vacher, Pierre and Wattrisse, Bertrand Assessment of digital image correlation measurement errors: methodology and results. (2009) Experimental Mechanics, vol. 49 (n° 3). pp. 353-370. ISSN 0014-4851

Seguy (Garcia), Anne and Noyes, Daniel and Clermont, Philippe Caractérisation et estimation des performances en e-maintenance. (2009) Journal Européen des Systèmes Automatisés , vol. 43 (n°1-2). pp. 73-101. ISSN 1269-6935

Claverie, Fanny and Pécheyran, Christophe and Mounicou, Sandra and Ballihaut, Guillaume and Fernandez Garcia, Beatriz and Alexis, Joël and Lobinski, Ryszard and Donard, Olivier F. X. Characterization of the aerosol produced by infrared femtosecond laser ablation of polyacrylamide gels for the sensitive inductively coupled plasma mass spectrometry detection of selenoproteins. (2009) Spectrochimica Acta Part B: Atomic Spectroscopy, vol. 64 (n° 7). pp. 649-658. ISSN 05848547

Puig, Vicenc and Romera, Juli and Quevedo, Joseba and Cardona, Claudia and Salterain, Antonio and Ayesa, Eduardo and Irizar, Ion and Castro, Alain and Lujan, Mathias and Charbonnaud, Philippe and Chiron, Pascale and Trouvat, Jean-Luc Optimal predictive control of water transport systems: Arrêt-Darré/Arros case study. (2009) Water Science & Technology — WST, vol. 60 (n° 8). pp. 2125-2133. ISSN 0273-1223

Galasso, Francois and Mercé, Colette and Grabot, Bernard Decision support framework for supply chain planning with flexible demand. (2008) International Journal of Production Research, vol. 47 (2). pp. 455-478. ISSN 0020-7543

Kamsu Foguem, Bernard and Coudert, Thierry and Geneste, Laurent and Béler, Cédrick Knowledge formalization in experience feedback processes : an ontology-based approach. (2008) Computers in Industry, vol. 5 (n° 7). pp. 694-710. ISSN 0166-3615

Seguy, Sébastien and Dessein, Gilles and Arnaud, Lionel Surface roughness variation of thin wall milling, related to modal interactions. (2008) International Journal of Machine Tools and Manufacture, vol. 48 (n° 3-4). pp. 261-274. ISSN 0890-6955

Marcotte, Francois and Grabot, Bernard and Affonso, Roberta Cooperation models for Supply Chain Management. (2008) International Journal of Logistics Systems and Management (IJLSM), vol. 5 (n° 1/2). ISSN 1742-7967

Fernandez Garcia, Beatriz and Claverie, Fanny and Pécheyran, Christophe and Alexis, Joël and Donard, Olivier F. X. Direct determination of trace elements in powdered samples by in-cell isotope dilution femtosecond laser ablation ICPMS. (2008) Analytical Chemistry, vol. 80 (n° 18). pp. 6981-6994. ISSN 0003-2700

Béguin, Jean-Denis and Samélor, Diane and Vahlas, Constantin and Gleizes, Alain and Petit, Jacques-Alain and Sheldon, Brian W. Evaluation of Al2O3 MOCVD Coating for Titanium Alloys Protection Under Severe Conditions At High Temperature. (2008) Materials Science Forum, vol. 595 - 5 . pp. 719-724. ISSN 0255-5476

Selva, Pierre and Dalverny, Olivier and Mistou, Sébastien and Karama, Moussa and Alexis, Joël and Deramecourt, Arnaud Modélisation des assemblages de ballons pressurisés stratosphériques. (2008) Mécanique & Industries, vol. 9 (n° 2). pp. 159-165. ISSN 1296-2139

Nistor, Ionel and Pantalé, Olivier and Caperaa, Serge Numerical implementation of the eXtended Finite Element Method for dynamic crack analysis. (2008) Advances in Engineering Software, vol. 39 (n° 7). pp. 573-587. ISSN 0965-9978

Dehmous, Hocine and Welemane, Hélène and Karama, Moussa and Aît Tahar, Kamel Reliability approach for fibre-reinforced composites design. (2008) International journal of simulation and multidisciplinary design optimization, vol. 2 (n°1). pp.1-9. ISSN 1779-627X

Cazajus, Vincent and Lorrain, Bernard and Welemane, Hélène and Paranthoen, Yann and Karama, Moussa Thermo-mechanical behaviour of ceramic metal brazed assemblies. (2008) Journal of Materials: Design and Applications, vol. 222 (n° 4). pp. 291-297. ISSN 1464-4207

Seguy, Sébastien and Campa, Francisco Javier and López de Lacalle, Luis Norberto and Arnaud, Lionel and Dessein, Gilles and Aramendi, Gorka Toolpath dependent stability lobes for the milling of thin-walled parts. (2008) International journal of machining and machinability of materials, vol. 4 (n° 4). pp. 377-392. ISSN 1748-5711

Noyes, Daniel and Peres, François Analyse des systèmes - Sûreté de fonctionnement. (2007) Techniques de l'Ingénieur .

Kondo, Djimédo and Welemane, Hélène and Cormery, Fabrice Basic concepts and models in continuum damage mechanics. (2007) Revue européenne de génie civil, vol. 11 (n° 7-8). pp. 927-943. ISSN 1774-7120

Stempflé, Philippe and Pantalé, Olivier and Njiwa, Richard Kouitat and Rousseau, Marthe and Lopez, Evelyne and Bourrat, Xavier Friction-induced sheet nacre fracture: effects of nano-shocks on cracks location. (2007) International Journal of Nanotechnology, vol. 4 (n° 6). pp. 712-729. ISSN 1475-7435

Nistor, Ionel and Pantalé, Olivier and Caperaa, Serge Numerical propagation of dynamic cracks using X-FEM. (2007) Revue européenne de mécanique numérique, vol. 16 (n° 2). pp. 183-198. ISSN 1779-7179

Dagdag, Sélim and Alexis, Joël and Petit, Jacques-Alain and Ferrato, Marc and Galy, Jerome Élaboration de céramiques sans ajouts de frittage par Spark Plasma Sintering pour application en électronique de puissance. (2007) Matériaux & Techniques, vol. 95 (n° 4-5). pp. 297-306. ISSN 0032-6895

Salabura, Jean-Claude and Adamou, Adib Soufiane and Denape, Jean and Paris, Jean-Yves and Andrieu, Eric Conception d’un tribomètre environnemental pour l’étude de la réactivité des surfaces frottantes. (2006) Mécanique & Industries, vol. 7 (n° 3). pp. 311-315. ISSN 1296-2139

Kamsu Foguem, Bernard and Chapurlat, Vincent Requirements modelling and formal analysis using graph operations. (2006) International Journal of Production Research, vol. 4 (n° 17). pp. 3451-3470. ISSN 0020-7543

Viel, Sandrine and Coudert, Thierry and Geneste, Laurent Proposition d’une architecture composée de multiples processus de retour d’expérience coopérants. (2006) Revue Française de Génie Industriel, vol. 25 (n° 4). ISSN 0242-9780

Adamou, Adib Soufiane and Denape, Jean and Paris, Jean-Yves and Andrieu, Eric An environmental tribometer for the study of rubbing surface reactivity. (2006) Wear, vol. 261 (n° 3 - 4). pp. 311-317. ISSN 0043-1648

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Cazenave-Larroche, Gilles Integration of dynamic behaviour variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling. (2006) The International Journal of Advanced Manufacturing Technology, vol. 27 (n ° 7-8). pp. 638-644. ISSN 0268-3768

Menanteau, Laurent and Pantalé, Olivier and Caperaa, Serge A methodology for large scale finite element models, including multi-physic, multi-domain and multi-timestep aspects. (2006) Revue européenne de mécanique numérique, vol. 15 (n° 7-8). pp. 799-824. ISSN 1779-7179

Nistor, Ionel and Pantalé, Olivier and Caperaa, Serge A new impact test for the identification of a dynamic crack propagation criterion using a gas-gun device. (2006) Journal de Physique IV - Proceedings, vol. 134 . pp. 713-718. ISSN 1155-4339

Fortin, Elodie and Mailley, Pascale and Lacroix, Loïc and Szunerits, Sabine Imaging of DNA hybridization on microscopic polypyrrole patterns using scanning electrochemical microscopy (SECM): the HRP bio-catalyzed oxidation of 4-chloro-1-naphthol. (2006) The Analyst, vol. 131 (n°2). pp. 186-193. ISSN 0003-2654

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Cazenave-Larroche, Gilles Influence of material removal on the dynamic behavior of thin-walled structures in peripheral milling. (2006) Machining Science and Technology, vol. 10 (n° 3). pp. 275-287. ISSN 1091-0344

Tchangani, Ayeley and Noyes, Daniel Modeling dynamic reliability using dynamic Bayesian networks. (2006) Journal Européen des Systèmes Automatisés, vol. 40 (n° 8). pp. 911-935. ISSN 1269-6935

Desforges, Xavier and Archimède, Bernard Multi-agent framework based on smart sensors/actuators for machine tools control and monitoring. (2006) Engineering Applications of Artificial Intelligence, vol. 1 (n° 6). pp. 641-655. ISSN 0952-1976

Cazajus, Vincent and Lorrain, Bernard and Welemane, Hélène and Karama, Moussa Residual stresses in ceramic metal assembly after brazing process. (2006) Advances in Science and Technology, vol. 45 . pp. 1543-1550. ISSN 1662-8969

Noyes, Daniel and Peres, François Retour d’expérience et évaluation de stratégies de maintenance. (2006) Journal Européen des Systèmes Automatisés, vol. 40 (n°7). pp. 721-743. ISSN 1269-6935

Pantalé, Olivier Parallelization of an object-oriented FEM dynamics code: influence of the strategies on the Speedup. (2005) Advances in Engineering Software, vol. 36 (n° 6). pp. 361-373. ISSN 0965-9978

Thévenot, Vincent and Arnaud, Lionel and Dessein, Gilles and Cazenave-Larroche, Gilles Influence de la position de l'outil sur le comportement dynamique en fraisage de parois minces. (2005) Mécanique & Industries, vol. 6 (n°4). pp. 403-410. ISSN 1296-2139

Pantalé, Olivier and Bacaria, Jean-Louis and Dalverny, Olivier and Rakotomalala, Roger and Caperaa, Serge 2D and 3D numerical models of metal cutting with damage effects. (2004) Computer Methods in Applied Mechanics and Engineering, vol. 193 (n° 39-41). pp. 4383-4399. ISSN 0045-7825

Pantalé, Olivier and Caperaa, Serge and Rakotomalala, Roger Development of an object-oriented finite element program: application to metal-forming and impact simulations. (2004) Journal of Computational and Applied Mathematics, vol. 168 (n° 1-2). pp. 341-351. ISSN 0377-0427

Alexis, Joël and Adrian, Denise and Masri, Talal and Petit, Jacques-Alain Adherence of electrodeposited Zn-Ni coatings on EN AW2024 T3 aluminium alloy. (2004) Surface Engineering, vol. 20 (n° 2). pp. 121-127. ISSN 0267-0844

Béguin, Jean-Denis and Faure, Pierre and Adrian, Denise and Alexis, Joël and Petit, Jacques-Alain and Belaygue, Philippe and Fournier, Dominique Environmental protection of titanium alloys in centrifugal compressors at 500°C in saline atmosphere. (2004) Surface Engineering, vol. 20 (n° 2). pp. 135-138. ISSN 0267-0844

Desforges, Xavier and Habbadi, Abdallah and Geneste, Laurent and Soler, François Distributed machining control and monitoring using smart sensors/actuators. (2004) Journal of Intelligent Manufacturing, vol. 1 (n° 1). pp. 39-53. ISSN 0956-5515

Coudert, Thierry and Grabot, Bernard and Archimède, Bernard Systèmes multiagents et logique floue pour un ordonnancement cooperative production/maintenance. (2004) Journal of Decision Systems, vol. 13 (n° 1). pp. 27-62. ISSN 1246-0125

Geneste, Laurent and Grabot, Bernard and Letouzey, Agnès Scheduling uncertain orders in the customer–subcontractor context. (2003) European Journal of Operational Research, vol. 147 (n° 2). pp. 297-311. ISSN 0377-2217

Nistor, Ionel and Pantalé, Olivier and Caperaa, Serge and Sattouf, Chakib A new dynamic test for the identification of high speed friction law using a gas-gun device. (2003) Journal de Physique IV (Proceedings), vol. 110 . pp. 519-524. ISSN 1155-4339

Pantalé, Olivier An object-oriented programming of an explicit dynamics code: application to impact simulation. (2002) Advances in Engineering Software, vol. 33 (n° 5). pp. 297-306. ISSN 0965-9978

Dalverny, Olivier and Caperaa, Serge and Pantalé, Olivier and Sattouf, Chakib Identification de lois constitutives et de lois de frottement adaptées aux grandes vitesses de sollicitation. (2002) Journal de Physique IV - Proceedings, vol. 12 (n° 11). pp. 275-282. ISSN 1155-4339

Coudert, Thierry and Grabot, Bernard and Archimède, Bernard Production/maintenance cooperative scheduling using multi-agents and fuzzy logic. (2002) International Journal of Production Research, vol. 40 (n° 18). pp. 4611-4632. ISSN 0020-7543

Bacaria, Jean-Louis and Dalverny, Olivier and Pantalé, Olivier and Rakotomalala, Roger Transient Numerical Models of Metal Cutting using the Johnson-Cook's Rupture Criterion. (2002) International Journal of Forming Processes, vol.5 (n°1). pp. 53-70. ISSN 1292-7775

Archimède, Bernard and Coudert, Thierry Reactive scheduling using a multi-agent model: the SCEP framework. (2001) Engineering Applications of Artificial Intelligence, vol. 14 (n° 5). pp. 667-683. ISSN 0952-1976

Charbonnaud, Philippe and Rotella, Frédéric and Médar, Smain Process operating mode monitoring : switching online the right controller. (2001) IEEE Transactions on Systems, Man, and Cybernetics, Part C: Applications and Reviews, Vol. 3 (N° 1). pp. 77-86. ISSN 1094-6977

Grabot, Bernard and Letouzey, Agnès Short-term manpower management in manufacturing systems: new requirements and DSS prototyping. (2000) Computers in Industry, vol. 43 (n° 1). pp. 11-29. ISSN 0166-3615

Archimède, Bernard and Priem, Laurent and Coudert, Thierry Ordonnancement multisite de systèmes flexibles de production via CORBA. (2000) Journal Européen des Systèmes Automatisés, vol. 34 (n° 2-3). pp. 317-330. ISSN 1269-6935

Pantalé, Olivier and Rakotomalala, Roger and Touratier, Maurice An ALE three-dimensional model of orthogonal, oblique metal cutting processes. (1998) International Journal of Forming Processes, vol.1 (n° 3). pp. 371-388. ISSN 1292-7775

Book

Denape, Jean and Popa, Nicolae and Onescu, Constantin Dinamica interfetelor in tribologie. (2012) Universitatii din Pitesti, 2012.

Book Section

Arnaud, Lionel BM7030 - Vibrations d’usinage - Comment les identifier et les limiter. (2012) In: Mise en forme des matériaux par usinage. Editions T.I., Paris, France, pp. 1-16.

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles Simulation Tool of the HSM machine dynamic behavior. (2011) In: Milling: Operations, Applications and Industrial Effects. Nova Science Publishers, pp. 209-228. ISBN 978-1-61470-903-9

Arnaud, Lionel and Dessein, Gilles Application of the stability lobes theory to milling of thin workpieces, experimental approach. (2003) In: Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering. Kluwer academic publishers, pp. 271-280. ISBN 978140201163

Lorong, Philippe and Pantalé, Olivier and Rakotomalala, Roger and Touratier, Maurice A 3D-Numerical Thermomechanical Approach for Materials Cutting. (2000) In: Continuum Thermomechanics. (Solid Mechanics and Its Applications ; n° 1). Kluwer, Netherlands, pp. 277-288. ISBN 978-0-7923-6407-8

Conference or Workshop Item

Pitiot, Paul and Aldanondo, Michel and Vareilles, Elise and Coudert, Thierry and Zhang, Linda Optimizing concurrent configuration and planning: a proposition to reduce computation time. ( In Press: 2013) In: IEEE International Conference on Industrial Engineering and Engineering Management, 10 December 2013 - 13 December 2013 (Bangkok, Thailand).

Baazaoui, Ahlem and Alexis, Joël and Dalverny, Olivier and Karama, Moussa Caractérisation expérimentale du comportement mécanique d’assemblage haute température pour l’électronique de puissance. (2013) In: Journées annuelles de la SF2M, 29 October 2013 - 31 October 2013 (Villeuve d'Ascq, France).

Dienot, Jean-Marc and Ramos, Ioav and Vidal, Paul-Etienne and Viguier, Christophe and Nogarède, Bertrand and Batista, Emmanuel Investigations multi physiques et expérimentations virtuelles des cas de bruits électromagnétiques et d'interactions champ proche dans les systèmes mobiles et mécatroniques. (2013) In: Assemblée plénière "Interférences d’Ondes", GDR Ondes, 28 October 2013 - 30 October 2013 (Dijon, France). (Unpublished)

Raffa, Maria Letizia and Lebon, Frédéric and Sacco, Elio and Welemane, Hélène A multi-level interface model for damaged masonry. (2013) In: International Conference on Civil, Structural and Environmental Engineering Computing, 03 September 2013 - 06 September 2013 (Cagliari, Italy).

Nouasse, Houda and Chiron, Pascale and Archimède, Bernard A water storage and release strategy for flood management based on transportation network with time delay. (2013) In: 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA), 10 September 2013 - 13 September 2013 (Cagliari, Italy).

Travieso-Rodríguez, Jose Antonio and González-Rojas, Hernan Alberto and Gomez-gras, Giovanni and Dessein, Gilles and Alexis, Joël Ball-burnishing process influence on hardness ans residual stresses of aluminium A92017. (2013) In: 17th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology, 10 September 2013 - 11 September 2013 (Istanbul, Turkey).

Mansot, Jean-Louis and Delbé, Karl and Baranek, Philippe and Thomas, Philippe and Boucher, Florent and Vangelisti, Rene and Billaud, Denis Experimental and theoretical investigations of friction properties of graphite intercalated compounds. (2013) In: 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 04 September 2013 - 06 September 2013 (Lyon, France).

Thomas, Philippe and Mansot, Jean-Louis and Delbé, Karl and Sauldubois, Audrey and Bilas, Philippe and Romana, Laurence and Legras, Laurent and Dubois, Marc and Guérin, Katia and Hamwi, André Friction properties of fluorinated carbons. (2013) In: World Tribology Congress 2013, 08 September 2013 - 13 September 2013 (Torino, Italy).

Vidal, Paul-Etienne and Cailhol, Simon and Rotella, Frédéric and Berkoune, Karima and Llor, Ana-Maria and Fadel, Maurice Generalized inverses applied to Pulse Width Modulation for static conversion: a first study. (2013) In: EPE'13 ECCE Europe , 03 September 2013 - 05 September 2013 (Lille, France).

Trentesaux, Damien and Grabot, Bernard and Sallez, Yves Intelligent products: a spinal column to handle information exchanges in supply chains. (2013) In: APMS 2013, 09 September 2013 - 13 September 2013 (State College, United States).

Baazaoui, Ahlem and Dalverny, Olivier and Alexis, Joël and Karama, Moussa Numerical modeling and prediction of thermomechanical degradation of power electronic packaging. (2013) In: ICSAAM 2013, The 5th International Conference on Structural Analysis of Advanced Materials, 23 September 2013 - 26 September 2013 (Island of Kos, Greece).

Parent, Guillaume and Massiot, Gregor and Rouet, Vincent and Munier, Catherine and Vidal, Paul-Etienne and Carrillo, Francisco Toward a reliability analysis method of wide band gap power electronic components and modules. (2013) In: IMAPS-Europe European Microelectronics and Packaging Conference EMPC, 09 September 2013 - 12 September 2013 (Grenoble, France).

Parent, Guillaume and Massiot, Gregor and Rouet, Vincent and Munier, Catherine and Vidal, Paul-Etienne and Carrillo, Francisco Towards a reliability analysis method of wide band gap power electronic components and modules. (2013) In: European Microelectronics and Packaging Conference , 09 September 2013 - 12 September 2013 (Grenoble, France).

Levasseur, Séverine and Welemane, Hélène and Kondo, Djimédo Microcracks-induced damage modelling for transversely isotropic rock. (2013) In: International Symposium on Computational Geomechanics (ComGeo III), 21 August 2013 - 23 August 2013 (Krakow, Poland).

Welemane, Hélène and Goidescu, Cristina and Pantalé, Olivier and Karama, Moussa and Kondo, Djimédo Un modèle d’endommagement fragile pour les matériaux composites : couplage entre anisotropies initiale et induite et effets unilatéraux. (2013) In: Congrès Français de Mécanique, 26 August 2013 - 30 August 2013 (Bordeaux, France). (Unpublished)

Bouzarour-Amokrane, Yasmina and Tchangani, Ayeley and Peres, François Résolution des problèmes de décision de groupe par analyse bipolaire. (2013) In: 5èmes Journées Doctorales / Journées Nationales MACS, 11 July 2013 - 12 July 2013 (Strasbourg, France). (Unpublished)

Munoz Cuartas, Victor and Perrin, Marianne and Pastor, Marie-Laetitia and Welemane, Hélène and Cantarel, Arthur and Karama, Moussa Application of non destructive testing to the detection of aeronautical defects in composite structures. (2013) In: International Conference of Nonconventional Technologies, 12 June 2013 - 15 June 2013 (Sibiu, Romania).

Dienot, Jean-Marc Applications of Integrated Near-field Antennas for Diagnosis of Electromagnetic Noises in Hybrid Electronic Architectures. (2013) In: Electronic Control, Measurement, Signals and their application to Mechatronics, 24 June 2013 - 26 June 2013 (Toulouse, France).

Potes-Ruiz, Paula and Kamsu-Foguem, Bernard and Grabot, Bernard Improving maintenance strategies from experience feedback. (2013) In: MIM 2013, 19 June 2013 - 21 June 2013 (Saint Petersburg, Russian Federation).

Cailhol, Simon and Fillatreau, Philippe and Fourquet, Jean-Yves Interactive multimodal Path Planning in immersion. (2013) In: International Workshop of Electronics, Control, Measurement, Signals and their application to Mechatronics (ECMSM), 24 June 2013 - 26 June 2013 (Toulouse, France).

Botero, Juan Diego and Noyes, Daniel and Béler, Cédrick Modèle des risques pour les soumissionnaires aux appels d’offres. (2013) In: 10e Congrès International de Génie Industriel CIGI2013, 12 June 2013 - 14 June 2013 (La Rochelle, France).

Memon, Muhammad Ali and Archimède, Bernard and Letouzey, Agnès Planification des activités de transport d’une entreprise 3PL par une approche multi-agent. (2013) In: CIGI 2013, 12 June 0213 - 14 June 2013 (La Rochelle, France).

Botero, Juan Diego and Béler, Cédrick and Noyes, Daniel Risk analysis in project early phase taking into account the product lifecycle: Towards a generic risk typology for bidding process. (2013) In: 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013, 19 June 2013 - 21 June 2013 (Saint Petersburg, Russian Federation).

Péronnet, Elodie and Pastor, Marie-Laetitia and Welemane, Hélène and Huillery, Richard Non destructive testing of artificial defects in composite structures by thermal full field measurement methods. (2013) In: PhotoMechanics 2013, 27 May 2013 - 29 May 2013 (Montpellier, France). (Unpublished)

Kamissoko, Daouda and Zaraté, Pascale and Peres, François Vulnérabilité des réseaux face aux catastrophes naturelles. (2013) In: 14ème Congrès des doctorants EDSYS 2013, 16 Avr 2013, Tarbes, France .

Wehbe, Toufic and Arnaud, Lionel and Dessein, Gilles Faisabilité de la mesure de champs par stéréo corrélation d’images en conditions restrictives. Application aux vibrations de pièces minces en Usinage Grande Vitesse Anglais : Analyzing feasibility of field measurement by digital image stereo correlation to flexible workpiece vibrations during high speed machining. (2013) In: 19th LAAS Internation Science Conference, 05 April 2013 - 06 April 2013 (Beirut, Lebanon).

Botero, Juan Diego and Béler, Cédrick and Noyes, Daniel Maîtrise des risques dans le processus de réponse à appel d’offres. (2013) In: QUALITA'2013 10ème Congrès International Pluridisciplinaire Qualité et Sûreté de Fonctionnement, 19 March 2013 - 22 March 2013 (Compiègne, France). (Unpublished)

Memon, Muhammad Ali and Archimède, Bernard A multi-agent distributed framework for collaborative transportation planning. (2013) In: IFAC Conference on Manufacturing, Modeling and Control, 19 June 2013 - 21 June 2013 (Saint Petersburg, Russian Federation).

Malo, Andy and Villeneuve, Eric and Geneste, Laurent and Martinez, Olivier Consolidation des données statistiques par expertise et similarité pour la prévision des ventes. (2013) In: QUALITA2013, 2013 (Compiègne, France).

Kamissoko, Daouda and Zaraté, Pascale and Peres, François Decision aid problems criteria for infrastructure networks vulnerability analysis (regular paper). (2013) In: International conference on control, decision and information technologies (CoDIT13), 06 May 2013 - 08 May 2013 (Hammamet, Tunisia).

Kamissoko, Daouda and Zaraté, Pascale and Peres, François Decision support system for infrastructure network disruption management. (2013) In: Proceedings of the EWG-DSS Thessaloniki-2013 Workshop on Exploring New Directions for Decisions in the Internet Age, 29-31 May 2013 , Thessaloniki, Greece .

Graneix, Jérémie and Béguin, Jean-Denis and Pardeilhan, François and Masri, Talal and Alexis, Joël Etude expérimentale du soudage par laser YAG de l'alliage base nickel Hastelloy X. (2013) In: Journées Annuelles de la SF2M, 29 October 2013 - 31 October 2013 (Villeneuve d'Ascq, France).

Bouzarour-Amokrane, Yasmina and Tchangani, Ayeley and Peres, François Evaluation process in end-of-life systems management using BOCR analysis. (2013) In: IFAC Conference on Manufacturing, Modeling and Control, 19 June 2013 - 21 June 2013 (Saint Petersburg, Russian Federation).

Munoz Cuartas, Victor and Perrin, Marianne and Pastor, Marie-Laetitia and Welemane, Hélène and Cantarel, Arthur and Karama, Moussa Identification of the elastic properties of composite materials. (2013) In: International Conference on Structural Analysis of Advanced Materials, 23 September 2013 - 26 September 2013 (Island of Kos, Greece). (Unpublished)

Rodriguez-Fortun, José Manuel and Rotella, Frédéric and Alfonso, Jesus and Carrillo, Francisco and Orus, Javier Model-free control of a 3-DOF piezoelectric nanopositioning platform. (2013) In: Conference on Decision and Control, 10 December 2013 - 13 December 2013 (Florence, Italy).

Kamissoko, Daouda and Peres, François and Zaraté, Pascale Technological networks robustness and resilience assessment. (2013) In: 5th International Conference on Industrial Engineering and Systems Management (IESM 2013), 28-30 Oct 2013, Rabat, Morocco .

Memon, Muhammad Ali and Archimède, Bernard Towards a distributed framework for transportation planning: A food supply chain case study. (2013) In: IEEE International Conference on Networking, Sensing and Control , 10 April 2013 - 12 April 2013 (Paris-Evry, France).

Nouasse, Houda and Chiron, Pascale and Archimède, Bernard Transportation network model with time delay for flood lamination strategy. (2013) In: 2013 XXIV International Conference on Information, Communication and Automation Technologies (ICAT), 30 October 2013 - 01 November 2013 (Sarajevo, Bosnia And Herzegovina).

Lafon-Placette, Stéphanie and Delbé, Karl and Welemane, Hélène and Denape, Jean and Ferrato, Marc and Chéreau, Patrick Tribological behavior of a silicon carbide/carbone dry contact. (2013) In: World Tribology Congress 2013, 08 September 2013 - 13 September 2013 (Torino, Italy).

Datas, Adrien and Chiron, Pascale and Fourquet, Jean-Yves A singular value approach for humanoid motion analysis and simulation. (2012) In: 12th International Conference on Control, Automation, Robotics and Vision (ICARCV 2012), 5-7 dec 2012, Guangzhou, China .

Pitiot, Paul and Aldanondo, Michel and Vareilles, Elise and Zhang, Linda and Coudert, Thierry Some experimental results relevant to the optimization of configuration and planning problems. (2012) In: 20th International symposium on methodologies for intelligent systems - ISMIS, 04 December 2012 - 07 December 2012 (Macau, China).

Kamissoko, Daouda and Peres, François and Zaraté, Pascale Méthodologie et modèle d'analyse de la vulnérabilité et du risque des systèmes critiques interdépendants (regular paper). (2012) In: Congrès Lamda Mu 18, 15 October 2012 - 18 October 2012 (Tours, France).

Romero Bejarano, Juan Camilo and Coudert, Thierry and Geneste, Laurent and De Valroger, Aymeric Collaborative methodology for supply chain quality management: framework and integration with strategic decision processes in product development. (2012) In: 6th European Conference on Information Management and Evaluation, ECIME'2012, 13 September 2012 - 14 September 2012 (Cork, Ireland).

Proton, Vincent and Alexis, Joël and Andrieu, Eric and Odemer, Grégory and Blanc, Christine and Delfosse, Jérôme Corrosion and stress corrosion cracking behaviour of 2050 aluminium-lithium alloy joined by friction stir welding (FSW). (2012) In: EUROCORR 2012, 09 September 2012 - 13 September 2012 (Istanbul, Turkey).

Larignon, Céline and Andrieu, Eric and Alexis, Joël and Odemer, Grégory and Blanc, Christine Focus on the interactions between artificial microstructural ageing and susceptibility to localized corrosion under cyclic corrosion tests of an aeronautic 2024-T351 aluminium alloy. (2012) In: EUROCORR 2012, 09 September 2012 - 13 September 2012 (Istanbul, Turkey).

Grabot, Bernard and Houé Ngouna, Raymond and Lauroua, Fabien and Mayere, Anne Introducing "2.0" functionalities in an ERP. (2012) In: IFIP-APMS 2012, 24-26 Sep 2012, Rhodes, Greece . (Unpublished)

Desforges, Xavier and Diévart, Mickaël and Charbonnaud, Philippe and Archimède, Bernard A distributed architecture to implement a prognostic function for complex systems. (2012) In: First European Conference of the Prognostics and Health Management Society 2012, 03 July 2012 - 05 July 2012 (Dresden, Germany).

Cisse, Alioune and Massiot, Gregor and Munier, Catherine and Vidal, Paul-Etienne and Carrillo, Francisco and Alexis, Joël Etude du comportement mécanique des joints de brasure Au-Ge pour le report des composants SiC pour l’électronique de puissance haute température. (2012) In: 14ème édition de la Conférence Electronique de Puissance du Futur, 05 July 2012 - 07 July 2012 (Bordeaux, France).

Péronnet, Elodie and Dalverny, Olivier and Welemane, Hélène and Mistou, Sébastien Identification of damaged zone in composite materials using displacement field measurements. (2012) In: International conference on experimental mechanics ICEM 15, 22 July 2012 - 27 July 2012 (Porto, Portugal).

Péronnet, Elodie and Dalverny, Olivier and Welemane, Hélène and Mistou, Sébastien Identification of orthotropic material properties using displacement field measurements. (2012) In: European Solid Mechanics Conference - ESMC 12, 09 July 2012 - 13 July 2012 (Graz, Austria).

Vidal, Paul-Etienne and Medjahed, Hassen and Dienot, Jean-Marc and Nogarède, Bertrand Mechanical stress induced by electromagnetic forces on wire bonds of high power modules. (2012) In: EuroEm 2012 (European Electromagnetics), 02 July 2012 - 06 July 2012 (Toulouse, France).

Stempflé, Philippe and Bourrat, Xavier and Kouitat Njiwa, Richard and Pantalé, Olivier and Lopez, Evelyne and Takadoum, Jamal A multiscale tribological study of nacre : Evidence of wear nanomechanisms controlled by the frictional dissipated power. (2012) In: 15th Nordic Symposium on Tribology (NordTrib 2012), 12-15 June 2012, Trondheim, Norway .

Botero, Juan Diego and Béler, Cédrick and Noyes, Daniel and Geneste, Laurent Analyse du cycle de vie du produit par retour d'expérience: proposition d'un outil d'assistance au processus de réponse à appel d'offres. (2012) In: 9e Conférence Internationale de Modélisation, Optimisation et SIMulation - MOSIM'12, 06 June 2012 - 08 June 2012 (Bordeaux, France).

Martinez, Francisco Javier and Canales, Margarita and Alcalà, Noelia and Jiménez, Miguel Angel and Yahiaoui, Malik and Ural, Aydemir Güralp and Paris, Jean-Yves and Delbé, Karl and Denape, Jean Analysis of wear mechanism in TPU-steel contact pair by means of long stroke tribometer tests. (2012) In: LubMat'12, 06 June 2012 - 08 June 2012 (Bilbao, Spain).

Bouzarour-Amokrane, Yasmina and Tchangani, Ayeley and Peres, François BOCR analysis applied to the management of end-of-life systems. (2012) In: Fifth Doctoral Spring Workshop “Product and Asset Lifecycle Management” (PALM -- DSW), 03 June 2012 - 06 June 2012 (Taormina - Giardini Naxos, Italy). (Unpublished)

Bouzarour-Amokrane, Yasmina and Tchangani, Ayeley and Peres, François Defining and measuring risk and opportunity in BOCR framework for decision analysis. (2012) In: 9e International Conference of Modeling and Simulation - MOSIM’12 , 6-8 Jun 2012, Bordeaux, France . (Unpublished)

Ming, Yue and Houé Ngouna, Raymond and Grabot, Bernard Models for supply chain negotiation in collaborative relationships. (2012) In: 9th International Conference on Modeling, Optimization & SIMulation, 6-8 Jun 2012, Bordeaux, France . (Unpublished)

Bertin, Aurélie and Clermont, Philippe and Noyes, Daniel Proposition d'amélioration d'un système de retour d'expérience. (2012) In: 9e Conférence internationale de modélisation, optimisation et simulation - MOSIM’12, 06-08 Jun 2012, Bordeaux, France .

Potes Ruiz, Paula and Noyes, Daniel and Kamsu-Foguem, Bernard Raisonnement collaboratif à partir de cas dans la résolution de problèmes en maintenance. (2012) In: 9th International Conference on Modeling, Optimization & SIMulation, 06 June 2012 - 08 June 2012 (Bordeaux, France). (Unpublished)

Xu, Jiucheng and Archimède, Bernard and Letouzey, Agnès A distributed multi-agent framework for shared resources scheduling. (2012) In: 14th IFAC Symposium on Information Control Problems in Manufacturing, May 23-25, 2012, Bucharest, Romania .

Gassara, Bassem and Dessein, Gilles and Baili, Maher and Hbaieb, Moncef and Bouzid Saï, Wassila Modélisation du comportement cinématique des axes d'un centre d'usinage en fraisage à grande vitesse. (2012) In: 4th International Symposium on Aircraft Materials, 09-12 May 2012, Fez, Morocco .

Ming, Yue and Houé Ngouna, Raymond and Grabot, Bernard MRP-based negotiation in customer-supplier relationship. (2012) In: 14th IFAC Symposium on Information Control Problems in Manufacturing, 23-25 May 2012, Bucharest, Romania . (Unpublished)

Cisse, Alioune and Vidal, Paul-Etienne and Massiot, Gregor and Munier, Catherine and Carrillo, Francisco Numerical modelling of a high temperature power module technology with SiC devices for high density power electronics. (2012) In: PCIM Europe, Power Electronics - Intelligent Motion - Renewable Energy - Energy Management, 8-10 may 2012, Nuremberg, Germany .

Bertin, Aurélie and Noyes, Daniel and Clermont, Philippe Problem solving methods as Lessons Learned System instrumentation into a PLM tool. (2012) In: 14th IFAC Symposium on Information Control Problems in Manufacturing,, May 23-25, 2012, Bucarest, Roumanie. .

Yahiaoui, Malik and Gerbaud, Laurent and Paris, Jean-Yves and Delbé, Karl and Denape, Jean and Dourfaye, Alfazazi Établissement d’un critère de qualité des taillants diamant/WC-Co pour l’excavation de formations rocheuses. (2012) In: 24e Journées internationales francophones de tribologie, 9-11 mai 2012, Aix-en-Provence, France . (Unpublished)

Radutoiu, Nicoleta and Lacroix, Loïc and Alexis, Joël and Abrudeanu, Marioara and Petit, Jacques-Alain Study of the localized corrosion of over-aged aeronautical 2024 aluminum alloy. Kelvin probe Force Microscopy (KFM) application. (2012) In: ACMA 2012, 09 May 2012 - 12 May 2012 (Fez, Morocco).

Msolli, Sabeur and Baazaoui, Ahlem and Dalverny, Olivier and Alexis, Joël and Karama, Moussa Viscoplastic behavior of diamond die attach subjected to high temperature conditions. (2012) In: 13th International conference on thermal, mechanical and multi-physics simulation and experiments in microelectronics and microsystems, EuroSimE 2012, 16-18 Apr 2012, Lisbon, Portugal .

Medjahed, Hassen and Vidal, Paul-Etienne and Nogarède, Bertrand Comparison between electromagnetic and thermal stress induced by Direct Current flow in IGBT bond wires. (2012) In: International conference on integrated power electronics systems - CIPS 2012, 06 March 2012 - 08 March 2012 (Nuremberg, Germany).

Ming, Yue and Grabot, Bernard and Houé Ngouna, Raymond Towards a collaborative MRP for supply chain coordination. (2012) In: 2012 IEEE International Conference on Industrial Technology (ICIT), 19-21 Mar 2012, Athens, Greece .

Vareilles, Elise and Coudert, Thierry and Aldanondo, Michel and Geneste, Laurent and Abeille, Joël Coupling system design and project planning: discussion on a bijective link between system and project structures. (2012) In: 14th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'2012, 23-25 May 2012, Bucharest, Romania .

Nouasse, Houda and Charbonnaud, Philippe and Chiron, Pascale and Murillo, Javier and Morales, Mario and Garcia-Navarro, Pilar and Perez, Guillermo Flood lamination strategy based on a three-flood-diversion-area system management. (2012) In: 20th Mediterranean Conference on Control and Automation - IEEE MED 2012, 03 July 2012 - 06 July 2012 (Barcelona, Spain).

Villeneuve, Eric and Béler, Cédrick and Peres, François and Geneste, Laurent Hybridization of statistical and cognitive experience feedbacks to perform risk assessment. ( In Press: 2012) In: IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 10-13 Dec 2012, Hong-Kong, China .

Zbib, Nassim and Archimède, Bernard and Charbonnaud, Philippe Impact Evaluation of Interoperability Decision Variables on P2P Collaboration Performances. (2012) In: 14th IFAC Symposium on Information Control Problems in Manufacturing, 23-25 May 2012, Bucharest, Romania .

Coudert, Thierry and Vareilles, Elise and Geneste, Laurent and Aldanondo, Michel Improvement of retrieval in Case-Based Reasoning for system design. (2012) In: IEEE Industrial engineering and engineering management - IEEM, 10 December 2012 - 20 December 2012 (Hong Kong, China).

Botero, Juan Diego and Béler, Cédrick and Noyes, Daniel and Geneste, Laurent Integration of experience feedback into the product lifecycle: an approach to best respond to the bidding process. (2012) In: 14th IFAC Symposium on Information Control Problems in Manufacturing, 23-25 May 2012, Bucharest, Romania .

Baysse, Arnaud and Carrillo, Francisco and Habbadi, Abdallah Least squares and output error identification algorithms for continuous time systems with unknown time delay operating in open or closed loop. (2012) In: 16th IFAC Symposium on System Identification (Sysid 2012), 11-13 July 2012, Brussels, Belgium .

Welemane, Hélène and Goidescu, Cristina and Pantalé, Olivier and Barelli, Florent and Dalverny, Olivier Micromechanical modeling of brittle damage in composite materials: primary anisotropy, induced anisotropy and opening-closure effects. (2012) In: European Solid Mechanics Conference - ESMC 12, 09 July 2012 - 13 July 2012 (Graz, Austria).

Péronnet, Elodie and Pastor, Marie-Laetitia and Huillery, Richard and Dalverny, Olivier and Mistou, Sébastien and Welemane, Hélène Non destructive investigation of defects in composite structures by three infrared thermographic techniques. (2012) In: International conference on experimental mechanics ICEM 15, 22 July 2012 - 27 July 2012 (Porto, Portugal).

Datas, Adrien and Chiron, Pascale and Fourquet, Jean-Yves On singular values decomposition and patterns for human motion analysis and simulation. (2012) In: 17th International Conference on Methods and Models in Automation and Robotics (MMAR), 27-30 Aug 2012, Miedzyzdroje, Poland .

Dienot, Jean-Marc and Batista, Emmanuel Real-cases of electromagnetic immunity and reliability in embedded electronics architectures. (2012) In: EUROEM 2012, 02 July 2012 - 06 July 2012 (Toulouse, France).

Xu, Jiucheng and Archimède, Bernard and Letouzey, Agnès Shared resources scheduling using a multi-agent model: the DSCEP framework. ( In Press: 2012) In: 9th International Conference of Modeling, Optimization and Simulation - MOSIM’12, 06-08 June 2012, Bordeaux, France .

Romero Bejarano, Juan Camilo and Coudert, Thierry and Geneste, Laurent and De Valroger, Aymeric Technic and Collaboration Breakdown Structures: Drivers of collaborative problem solving approaches in a supply chain context. (2012) In: 14th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'2012, 23-25 May 2012, Bucharest, Romania .

Saab, Layale and Mansard, Nicolas and Souères, Philippe and Fourquet, Jean-Yves and Sreenivasa, Manish and Nakamura, Yoshihiko Whole-Body Torques for Generating Complex Movements in Humans and Humanoids. (2012) In: 10th International IFAC Symposium on Robot Control (SYROCO'12), 5-7 Sept 2012, Dubrovnik, Croatia .

Popa, Andreï and Baili, Maher and Dessein, Gilles and Dutilh, Vincent Identification of tool failure modes in drilling Udimet® 720 superalloy. (2011) In: International conference on structural analysis of advanced materials (ICSAAM2011), 7 - 10 Sept 2011, Sinaia, Romania .

Garnier, Christian and Pastor, Marie-Laetitia and Lorrain, Bernard Finite element model for impact on composite structures. (2011) In: 16th International Conference on Composite Structures , 28 June 2011 - 28 June 2011 (Porto, Portugal). (Unpublished)

Datas, Adrien and Fourquet, Jean-Yves and Chiron, Pascale On least-cost path for realistic simulation of human motion. (2011) In: First International Symposium on Digital Human Modeling (DHM), 14-16 Jun 2011, Lyon, France .

Saab, Layale and Mansard, Nicolas and Keith, François and Fourquet, Jean-Yves and Souères, Philippe Generation of dynamic motion for anthropomorphic systems under prioritized equality and inequality constraints. (2011) In: 2011 IEEE International Conference on Robotics and Automation (ICRA 2011), 09 May 2011 - 13 May 2011 (Shanghai, China).

Villeneuve, Eric and Béler, Cédrick and Peres, François and Geneste, Laurent Hybridization of Bayesian networks and belief functions to assess risk. Application to aircraft deconstruction. (2011) In: International Conference on Industrial Engineering and Systems Management (IESM 2011), 25-27 May 2011, Metz, France .

Villeneuve, Eric and Béler, Cédrick and Peres, François and Geneste, Laurent Couplage des réseaux bayésiens et des fonctions de croyance pour l'évaluation du risque.Application à la déconstruction d'avion. (2011) In: 9ème Congrès International Pluridisciplinaire en Qualité et Sûreté de FonctionnementCongrès - Qualita 2011, 23-25 Mars 2011, Angers, France . (Unpublished)

Guillaume, Romain and Thierry, Caroline and Grabot, Bernard A decision support tool for procurement planning process under uncertainty. (2011) In: IFAC World Congress 2011, 28 August 2011 - 02 September 2011 (Milano, Italy).

Barbosa, Carlos Nuno and Chabert, France and Nassiet, Valérie and Viana, Joao Carlos and Pereira, Paulo Effect of Clay Amounts on Morphology and Mechanical Performances in Multiscale PET Composites. (2011) In: The 14th European Scientific Association for Material Forming - ESAFORM 2011, 27-29 Apr 2011, Belfast, United Kingdom .

Kamissoko, Daouda and Peres, François and Zaraté, Pascale Infrastructure network vulnerability. (2011) In: International conference on collaboration technologies and infrastructures (WETICE), 2011, 27 June 2011 - 29 June 2011 (Paris, France).

Msaddek, El Bechir and Bouaziz, Zoubeir and Baili, Maher and Dessein, Gilles Modeling and simulation of high speed milling centers dynamics. (2010) In: 5th International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM2010), 18-20 Dec 2010, Hammamet, Tunisia .

Gherissi, Abderraouf and Abbassi, Fethi and Zghal, Ali and Mistou, Sébastien and Alexis, Joël Micro-scale modeling of carbon-fiber reinforced thermoplastic materials. (2010) In: 5th International Conference on Advances in Mechanical Engineering and Mechanics, 18 December 2010 - 20 December 2010 (Hammamet, Tunisia).

Popa, Andreï and Dutilh, Vincent and Baili, Maher and Dessein, Gilles and Perrin, Géraldine Identification of influent factors on surface integrity in nickel-base superalloy drilling. (2010) In: 19th International Conference on Manufacturing Systems - ICMaS 2010, 11 - 12 Nov 2010, Bucharest, Romania .

Hémont, Florian and Grabot, Bernard and Mayere, Anne Cooperation in Supply Chains: from practical problems to conceptual models. (2010) In: APMS 2010, 11 October 2010 - 13 October 2010 (Cernobbio, Italy).

Dutilh, Vincent and Popa, Andreï and Dessein, Gilles and Alexis, Joël and Perrin, Géraldine Impact of disturbed drilling conditions on the surface integrity of a Nickel-base superalloy. (2010) In: CIRP ICME ’10 - 7th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING, 23 June 2010 - 25 June 2010 (Capri, Italy). (Unpublished)

Baili, Maher and Wagner, Vincent and Dessein, Gilles and Sallabery, Julien and Lallement, Daniel Influence de la température sur l’usinabilité du Ti-5-5-5-3. (2010) In: International Symposium on Aircraft Materials, 12 - 14 May 2010, Marrakech, Morocco. .

Msolli, Sabeur and Dalverny, Olivier and Alexis, Joël and Karama, Moussa Mechanical characterization of an Au-Ge solder alloy for high temperature electronic devices. (2010) In: 6th International Conference on Integrated Power Electronics Systems (CIPS), 16 March 2010 - 18 March 2010 (Nuremberg, Germany).

Brault, Romain and Djilali, Toufik and Fazzini, Marina and Mistou, Sébastien Bi-axial fatigue analysis by stereo-correlation measurement. (2010) In: 14th International Conference on Experimental Mechanics (ICEM14), 04 July 2010 - 09 July 2010 (Poitiers, France).

Seguy, Sébastien and Dessein, Gilles and Arnaud, Lionel and Insperger, Tamás Chatter Control by Spindle Speed Variation in High-Speed Milling. (2010) In: ICSAAM 2009, 7-10 Sept 2009, Tarbes, France .

Diévart, Mickaël and Charbonnaud, Philippe and Desforges, Xavier Distributed embedded health assessment of networked instruments. (2010) In: 12th IFAC Symposium on Large Scale Systems : Theory and Applications (LSS 2010), 12-14 juillet 2010, Villeneuve d'Ascq, France .

Fazzini, Marina and Mistou, Sébastien and Dalverny, Olivier Error assessment in image stereo-correlation. (2010) In: 14th International Conference on Experimental Mechanics (ICEM14), 04 July 2010 - 09 July 2010 .

Garnier, Christian and Lorrain, Bernard and Pastor, Marie-Laetitia Impact damage evolution under fatigue loading by InfraRed Thermography on composite structures. (2010) In: 14th International Conference of Experimental Mechanics (ICEM 14), 04 July 2010 - 09 July 2010 (Poitiers, France).

Guillaume, Romain and Thierry, Caroline and Grabot, Bernard Integration of the supplier capacity for choosing the less risked schedule within an uncertain environment. (2010) In: PROVE'10, 11 October 2010 - 13 October 2010 (Saint-Etienne, France).

Datas, Adrien and Chiron, Pascale and Fourquet, Jean-Yves On geodesic paths and least-cost motions for human-like tasks. (2010) In: 2010 IEEE International Conference on Robotics and Biomimetics (ROBIO), 14-18 Dec 2010, Tianjin, China .

Ladevèze, Nicolas and Fourquet, Jean-Yves On the Collaboration of an Automatic Path-Planner and a Human User for Path-Finding in Virtual Industrial Scenes. (2010) In: 11th International Conference on Control Automation Robotics & Vision (ICARCV) , 7-10 Dec 2010 , Singapore .

Wagner, Vincent and Baili, Maher and Dessein, Gilles and Lallement, Daniel Behaviour laws comparison for titanium alloys machining: Application to Ti5553. (2009) In: International conference on structural analysis of advanced materials, 7 - 10 Sep 2009, Tarbes, France .

Ming, Yue and Houé Ngouna, Raymond and Grabot, Bernard Coordination in supply chains: from case studies to reference models. (2009) In: APMS 2009, 19 September 2009 - 23 September 2009 (Bordeaux, France).

Affonso, Roberta and Grabot, Bernard and Marcotte, Francois Coordination model for Supply Chain Management (SCM): an example in the application of the production planning process. (2009) In: International Conference on Computers & Industrial Engineering, 2009. CIE 2009, 06 July 2009 - 09 July 2009 (Troyes, France).

Guillaume, Romain and Thierry, Caroline and Grabot, Bernard Integration of ill-known requirements in production planning. (2009) In: International Conference on Computers & Industrial Engineering, 2009. CIE 2009, 06 July 2009 - 09 July 2009 (Troyes, France).

Grabot, Bernard and Houé Ngouna, Raymond Operational competence management comparison of industrial frameworks. (2009) In: INCOM'09, 03 June 2009 - 05 June 2009 (Moscow, Russian Federation).

Grabot, Bernard and Mayere, Anne SME and Planning in Supply Chains:a Socio-technical View. (2009) In: International Conference on Engineering and Systems Management 09, 13 May 2009 - 15 May 2009 (Montréal, Canada).

Arnaud, Lionel and Duthil, Vincent and Dessein, Gilles and Saussol, Antoine and Arnaud, Michel Analyse et réduction des vibrations d'usinage d'une pièce automobile produite en grande série. (2008) In: XVIème Colloque Vibrations, Chocs & Bruit, 10-12 juin, 2008, Lyon, France .

Wehbe, Toufic and Dessein, Gilles and Arnaud, Lionel Etude expérimentale du comportement vibratoire d'une pièce mince en usinage. (2008) In: 5ème Assises Machines et Usinage à Grande Vitesse - Assises MUGV 2008, 5-6 June 2008, Nantes, France .

Wehbe, Toufic and Dessein, Gilles and Arnaud, Lionel Experimental study of thin part vibration modes in machining. (2008) In: 17th International Conference on Manufacturing Systems – ICMaS, 13-14 Nov 2008, Bucharest, Romania .

Seguy, Sébastien and Arnaud, Lionel and Dessein, Gilles and Insperger, Tamás and Peigné, Grégoire Influence d'une vitesse de rotation variable sur les vibrations d'usinage en UGV. (2008) In: 5ème Assises Machines et Usinage à Grande Vitesse - Assises MUGV 2008, 5-6 June 2008, Nantes, France .

Arnaud, Lionel and Dutilh, Vincent and Dessein, Gilles and Insperger, Tamás Vibrations d'usinage en tournage intérieur fortement interrompu, d'une pièce produite en grande série. (2008) In: 5ème Assises Machines et Usinage à Grande Vitesse - Assises MUGV 2008, 5-6 June 2008, Nantes, France .

Alexis, Joël and Etcheverry, Bernard Adherence of coatings: determination - problems - examples. (2007) In: 21st international conference on surface modification technologies, 24 September 2007 - 26 September 2007 (Paris, France).

Ferdinand, Cyrille and Alexis, Joël and Masri, Talal and Petit, Jacques-Alain and Ganza, Jean-Christophe Characterization of refractory titanium alloys welded by TIG and laser processes. (2007) In: 11th World Conference on Titanium, 03 June 2007 - 07 June 2007 (Kyoto, Japan).

Béler, Cédrick and Desforges, Xavier Experience feedback, from cases to knowledge. (2007) In: MCPL 2007, 4th IFAC Conference on Management and Control of Production and Logistics, september 27-30, 2007, Sibiu, Romania .

Fazzini, Marina and Mistou, Sébastien and Karama, Moussa and Desmars, Bruno and Peres, Patrick Identification of elastomers by digital image correlation. (2007) In: 5th European Conference on Constitutive Models for Rubber, 04 September 2007 - 09 September 2007 (Paris, France).

Béguin, Jean-Denis and Adrian, Denise and Petit, Jacques-Alain and Rivière, Jean-Paul and Vahlas, Constantin and Vaillant, S. Improvement of salt corrosion resistance of titanium alloys by PVD and CVD coatings. (2007) In: 20 th International Conference on Surface Modification Technologies, 25-29 Sep 2006, Vienna, Austria .

Aimar, Pierre and Alexis, Joël and Causserand, Christel and Lebleu, Nathalie and Roques, Christine Potabilisation de l’eau par filtration membranaire : étude expérimentale des mécanismes de transfert des bactéries à travers la structure poreuse. (2007) In: 11ème Congrès de la Société Française de Génie des Procédés, 9-11 Oct 2007, Saint-Etienne .

Fazzini, Marina and Wehbe, Toufic and Dessein, Gilles and Arnaud, Lionel and Seguy, Sébastien Stéréo-corrélation d'image : application aux vibrations d'une paroi mince en usinage. (2007) In: Colloque méthodes et techniques optiques pour l'industrie, CMOI, 19-23 Nov 2007, Arcachon, France .

Campa, Francisco Javier and López de Lacalle, Luis Norberto and Aramendi, Gorka and Seguy, Sébastien and Arnaud, Lionel and Dessein, Gilles and Herranz, Sergio Fresado de estructuras de rigidez reducida utilizando un modelo de estabilidad en el dominio de la frecuencia. (2006) In: XVI Congreso de Maquinas Herramienta y Tecnologias de Fabricacion, 18-20 Octobre 2006, San Sebastian, 18-20 Oct 2006, San Sebastian, Espana . (Unpublished)

Campa, Francisco Javier and López de Lacalle, Luis Norberto and Herranz, Sergio and Arnaud, Lionel and Ukar, E. and Dessein, Gilles Optimización del fresado de piezas de rigidez reducida mediante un modelo de estabilidad tridimensional. (2005) In: 7º Congreso iberoamericano de ingenieria mecanica - 2005, 12-14 Oct 2005, Mexico .

Arnaud, Lionel and Dessein, Gilles Application de la théorie des lobes de stabilité au fraisage de parois minces. (2002) In: 4th International Conference on Integrated Design and Manufacturing in Mechanical Engineering - IDMME 2002, 14-16 May 2002, Clermont-Ferrand, France . (Unpublished)

Desforges, Xavier and Habbadi, Abdallah and Dessein, Gilles Contribution to Multiagent Machine tool Control: Intelligent Sensors for Feeddrive Monitoring. (2001) In: Mechatronics 2000, 1st IFAC Conference on Mechatronic Systems, 18-20 Sept 2000, Darmstadt, Germany .

Habbadi, Abdallah and Desforges, Xavier and Noyes, Daniel Data validation: a case study for a feed-drive monitoring. (1999) In: SDEMPED'99, The IEEE international Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, 01-03 Sept 1999, Gijon, Spain .

HDR

Dalverny, Olivier Contribution à la modélisation non linéaire des matériaux et des structures. (2012) [HDR]

Pantalé, Olivier Plateforme de prototypage virtuel pour la simulation numérique en grandes transformations thermomécaniques rapides. (2005) [HDR]

Thesis

Romero Bejarano, Juan Camilo. Collaborative problem solving within supply chains: general framework, process and methodology. PhD, Institut National Polytechnique de Toulouse, 2013

Brethous, Romain. Assemblages collés modèles à base d’adhésifs nanostructurés : interdiffusion entre des copolymères triblocs et une résine époxyde. PhD, Institut National Polytechnique de Toulouse, 2013

Gassara, Bassem. Conditions de coupe en fraisage à grande vitesse : effet de la variation de la vitesse d’avance. PhD, Institut National Polytechnique de Toulouse, 2013

Brault, Romain. Étude du comportement mécanique des matériaux composites par corrélation volumique : Application à l’analyse des effets du cisaillement transverse. PhD, Institut National Polytechnique de Toulouse, 2013

Datas, Adrien. Analyse et simulation de mouvements d'atteinte contraints en position et orientation pour un humanoïde de synthèse. PhD, Institut National Polytechnique de Toulouse, 2013

Yahiaoui, Malik. Comportement tribologique de diamants polycristallins et de carbures cémentés WC-Co avec traitements de graduation : application aux inserts et taillants d'outils pour le forage de formations rocheuses fortement abrasives. PhD, Institut National Polytechnique de Toulouse, 2013

Bertin, Aurélie. Intégration d'un système de Retour d'Expériences à un PLM. PhD, Institut National Polytechnique de Toulouse, 2012

Duco, Fabien. Méthodologies d'évaluation de la vulnérabilité sismique de bâtiments existants à partir d'une instrumentation in situ. PhD, Institut National Polytechnique de Toulouse, 2012

Tarrieu, Julie. Etude et durabilité de solutions de packaging polymère d'un composant diamant pour l'électronique de puissance haute température. PhD, Institut National Polytechnique de Toulouse, 2012

Jabrouni, Hicham. Exploitation des connaissances issues des processus de retour d'expérience industriels. PhD, Institut National Polytechnique de Toulouse, 2012

Peronnet, Elodie. Identification expérimentale du comportement d'un fuselage composite : détection de défauts par mesures de champs. PhD, Institut National Polytechnique de Toulouse, 2012

Villeneuve, Eric. Hybridation des retours d'expérience statistique et cognitif pour l'évaluation des risques : application à la déconstruction des aéronefs. PhD, Institut National Polytechnique de Toulouse, 2012

Medjahed, Hassen. Contribution à la simulation électro-thermomécanique numérique 3d : appliquée à l'étude de la fiabilité des interrupteurs à semiconducteurs packages, utilisés en traction ferroviaire. PhD, Institut National Polytechnique de Toulouse, 2012

Ming, Yue. Models for customer-supplier negotiation in a collaborative supply chain. PhD, Institut National Polytechnique de Toulouse, 2011

Garnier, Christian. Etude du comportement dynamique des structures composites réalisées par LRI : application à l’impact et à la fatigue. PhD, Institut National Polytechnique de Toulouse, 2011

Msolli, Sabeur. Modélisation thermomécanique de l'assemblage d'un composant diamant pour l'électronique de puissance haute température. PhD, Institut National Polytechnique de Toulouse, 2011

Goidescu, Cristina. Caractérisation et modélisation de l'endommagement par microfissuration des composites stratifiés - Apports des mesures de champs et de l'homogénéisation. PhD, Institut National Polytechnique de Toulouse, 2011

Abeille, Joël. Vers un couplage des processus de conception de systèmes et de planification de projets : formalisation de connaissances méthodologiques et de connaissances métier. PhD, Institut National Polytechnique de Toulouse, 2011

Wagner, Vincent. Amélioration de la productivité en usinage d'un titane réfractaire : le Ti5553. PhD, Institut National Polytechnique de Toulouse, 2011

Ural, Aydemir Güralp. Performance en frottement de composites alumine-métal avec ou sans nanotubes de carbone densifiés par frittage flash : Identification des conditions de grippage et des mécanismes d’usure. PhD, Institut National Polytechnique de Toulouse, 2011

Boniface, Benjamin. Modélisation thermo-mécanique et fiabilité des échangeurs réacteurs en carbure de silicium. PhD, Institut National Polytechnique de Toulouse, 2010

Diévart, Mickaël. Architectures de diagnostic et de pronostic distribuées de systèmes techniques complexes de grande dimension. PhD, Institut National Polytechnique de Toulouse, 2010

Ishak, Karim. Architecture distribuée interopérable pour la gestion des projets multi-sites : application à la planification des activités de production. PhD, Institut National Polytechnique de Toulouse, 2010

Baysse, Arnaud. Contributions à l'identification paramétrique de modèles à temps continu : extensions de la méthode à erreur de sortie, développement d'une approche spécifique aux systèmes à boucles imbriquées. PhD, Institut National Polytechnique de Toulouse, 2010

Wehbe, Toufic. Étude des vibrations de pièce mince durant l'usinage par stéréo corrélation d'images. PhD, Institut National Polytechnique de Toulouse, 2010

Ladevèze, Nicolas. Apport des méthodes de planification automatique dans les simulations interactives d'industrialisation et de maintenance en réalité virtuelle. PhD, Institut National Polytechnique de Toulouse, 2010

Fazzini, Marina. Développement de méthodes d'intégration des mesures de champs. PhD, Institut National Polytechnique de Toulouse, 2009

Baniel, Frédérique. Prise en compte d'objectifs de stabilité pour l'organisation de collectes de déchets. PhD, Institut National Polytechnique de Toulouse, 2009

Benaben, Anne-Lise. Méthodologie d'identification et d'évaluation de la sûreté de fonctionnement en phase de réponse à appel d'offre. PhD, Institut National Polytechnique de Toulouse, 2009

Pitiot, Paul. Amélioration des techniques d'optimisation combinatoire par retour d'expérience dans le cadre de la sélection de scénarios de Produit/Projet. PhD, Institut National Polytechnique de Toulouse, 2009

Ali, Mohamad. Assemblages structuraux des convertisseurs de puissance. PhD, Institut National Polytechnique de Toulouse, 2009

Godichaud, Matthieu. Outils d'aide à la décision pour la sélection des filières de valorisation des produits de la déconstruction des systèmes en fin de vie : application au domaine aéronautique. PhD, Institut National Polytechnique de Toulouse, 2009

Seguy (Garcia), Anne. Décision collaborative dans les systèmes distribués : application à la e-maintenance. PhD, Institut National Polytechnique de Toulouse, 2008

Seguy, Sébastien. De l’adaptation à la variation continue de la vitesse de broche afin de contrôler le broutement en fraisage de parois minces : modélisations et études expérimentales. PhD, Institut National Polytechnique de Toulouse, 2008

Béler, Cédrick. Modélisation générique d'un retour d'expérience cognitif. Application à la prévention des risques. PhD, Institut National Polytechnique de Toulouse, 2008

Hue, Valentin. Simulation de mouvement humain sur postes de travail pour le diagnostic et l'aide à la conception. PhD, Institut National Polytechnique de Toulouse, 2008

Larroque, Benoît. Observateurs de systèmes linéaires : application à la détection et localisation de fautes. PhD, Institut National Polytechnique de Toulouse, 2008

Peyruseigt, François. Optimisation mécanique d’un contact conforme : application aux rotules aéronautiques. PhD, Institut National Polytechnique de Toulouse, 2008

Costa Affonso, Roberta. Proposition d'un cadre de modélisation pour la coordination d’entreprises dans la chaîne logistique. PhD, Institut National Polytechnique de Toulouse, 2008

Djilali, Toufik. Élaboration d'une solution de collage pour les assemblages travaillant à haute et basse température : le Joint Multi-Adhésifs. Mise en oeuvre de la solution technologique et prédiction de son comportement en service. PhD, Institut National Polytechnique de Toulouse, 2007

Cazajus, Vincent. Approches numérique et expérimentale de la liaison céramique métal réalisée par brasage en vue de la création d’un outil d’aide à la conception. PhD, Institut National Polytechnique de Toulouse, 2007

Rabier, François. Modélisation par la méthode des plans d'expériences du comportement dynamique d'un module IGBT utilisé en traction ferroviaire. PhD, Institut National Polytechnique de Toulouse, 2007

Dehmous, Hocine. Reliability and micromechanics of composite materials. Application to the Laroin footbridge. PhD, Institut National Polytechnique de Toulouse, 2007

Yantio Njankeu Sabeya, Ghislain Roméo. Comportement tribologique d'un alliage de titane traité et/ou revetu en fretting à débattement libre. PhD, Institut National Polytechnique de Toulouse, 2007

Gros, Céline. Durabilité de joints adhésifs silicone sous conditions environnementales sévères : application au packaging en électronique de puissance. PhD, Institut National Polytechnique de Toulouse, 2006

Etcheverry, Bernard. Adhérence, mécanique et tribologie des revêtements composites NiP/Talc multifonctionnels à empreinte écologique réduite. PhD, Institut National Polytechnique de Toulouse, 2006

Houé Ngouna, Raymond. Modélisation des connaissances normatives en vue l'évaluation de la recyclabilité d'un produit en conception : des normes aux contraintes. PhD, Institut National Polytechnique de Toulouse, 2006

Enjalbert, Simon. Méthode et outil de simulation distribuée pour l'accommodation de la conduite de réseaux d'entreprises. PhD, Institut National Polytechnique de Toulouse, 2006

Dagdag, Sélim. Matériaux et revêtements céramiques multifonctionnels par PECVD et SPS pour l'intégration de puissance haute température - haute tension. PhD, Institut National Polytechnique de Toulouse, 2005

Bidot, Julien. A general framework integrating techniques for scheduling under uncertainty. PhD, Institut National Polytechnique de Toulouse, 2005

Thévenot, Vincent. Contribution à la maîtrise des phénomènes vibratoires en usinage de parois minces : Application à l'usinage de pales aéronautiques. PhD, Institut National Polytechnique de Toulouse, 2005

Nistor, Ionel. Identification expérimentale et simulation numérique de l'endommagement en dynamique rapide : application aux structures aéronautiques. PhD, Institut National Polytechnique de Toulouse, 2005

Padois, Vincent. Enchaînements dynamiques de tâches pour des manipulateurs mobiles à roues. PhD, Institut National Polytechnique de Toulouse, 2005

Ferdinand, Cyrille. Mise en oeuvre et caractérisation d'assemblages soudés par procédés TIG et laser de tôles d'alliages de titane réfractaires. PhD, Institut National Polytechnique de Toulouse, 2005

Duviella, Eric. Conduite réactive des systèmes dynamiques étendus à retards variables. Cas des réseaux hydrographiques. PhD, Institut National Polytechnique de Toulouse, 2005

Talbi, El-Djillali. Sélection et réglage de paramètres pour l'optimisation de logiciels d'ordonnancement industriel. PhD, Institut National Polytechnique de Toulouse, 2004

Menanteau, Laurent. Développement d'un module de prototypage virtuel multiphysique, multidomaine et multitemps. Application aux convertisseurs de puissance. PhD, Institut National Polytechnique de Toulouse, 2004

Rakoto, Holitiana. Intégration du retour d'expérience dans les processus industriels : application à Alstom Transport. PhD, Institut National Polytechnique de Toulouse, 2004

Letouzey, Agnès. Ordonnancement interactif basé sur des indicateurs : Applications à la gestion de commandes incertaines et à l'affectation des opérateurs. PhD, Institut National Polytechnique de Toulouse, 2001

Dalverny, Olivier. Vie tribologique à chaud et température interfaciale dans des contacts céramiques. PhD, Mécanique, Université de Bordeaux 1, 1998, 231 p.

This list was generated on Sun Apr 20 10:39:37 2014 CEST.