Items where Laboratory is "Institut Clément Ader - ICA (Toulouse, France)"

Garnier, Christian and Pastor, Marie-Laetitia and Lorrain, Bernard and Pantalé, Olivier Fatigue behaviour of impacted composite structures. (2013) Composite Structures, vol. 100 . pp. 443-450. ISSN 0263-8223

Roussouly, Nicolas and Petitjean, Frank and Salaün, Michel A new adaptive response surface method for reliability analysis. (2013) Probabilistic Engineering Mechanics, vol. 32 . pp. 103-115. ISSN 0266-8920

Maillet, Irène and Michel, Laurent and Rico, Germain and Fressinet, Mathieu and Gourinat, Yves A new test methodology based on structural resonance for mode I fatigue delamination growth in an unidirectional composite. (2013) Composite Structures, vol. 97 . pp. 353-362. ISSN 0263-8223

Chaussumier, Michel and Mabru, Catherine and Shahzad, Majid and Chieragatti, Rémy and Rezaï-Aria, Farhad A predictive fatigue life model for anodized 7050 aluminium alloy. (2013) International Journal of Fatigue, vol. 48 . pp. 205-213. ISSN 0142-1123

Israr, Haris Ahmad and Rivallant, Samuel and Barrau, Jean-Jacques Experimental investigation on mean crushing stress characterization of carbon–epoxy plies under compressive crushing mode. (2013) Composite Structures, vol. 96 . pp. 357-364. ISSN 0263-8223

Abdulhamid, Hakim and Kolopp, Amélie and Bouvet, Christophe and Rivallant, Samuel Experimental and numerical study of AA5086-H111 aluminum plates subjected to impact. (2013) International Journal of Impact Engineering, vol. 51 . pp. 1-12. ISSN 0734-743X

Sanches, Leonardo and Alazard, Daniel and Michon, Guilhem and Berlioz, Alain Robustness Analysis of Helicopter Ground Resonance with Parametric Uncertainties in Blade Properties. (2013) Journal of Guidance, Control, and Dynamics, vol. 36 (n° 1). pp. 272-281. ISSN 0731-5090

Pozzolini, Cédric and Renard, Yves and Salaün, Michel Vibro-impact of a plate on rigid obstacles: existence theorem, convergence of a scheme and numerical simulations. (2013) IMA Journal of Numerical Analysis, vol. 33 (n° 1). pp. 261 -294. ISSN 0272-4979

Delmas, Anthony. Contribution à l'étude de l'effet mirage : application aux mesures dimensionnelle et thermique par caméras visible proche infrarouge. PhD, Institut National Polytechnique de Toulouse, 2012

Ben Slima, Khalil and Penazzi, Luc and Mabru, Catherine and Ronde-Oustau, François Fatigue analysis-based numerical design of stamping tools made of cast iron. (2012) The International Journal of Advanced Manufacturing Technology . ISSN 0268-3768

Adam, Louis and Bouvet, Christophe and Castanie, Bruno and Daidie, Alain and Bonhomme, Elodie Discrete ply model of circular pull-through test of fasteners in laminates. (2012) Composite Structures, vol. 94 (n° 10). pp. 3082-3091.

Mabru, Catherine Etats de surface - Matériaux de surface : Résistance à l'endommagement. (2012) [HDR]

Tawk, Issam and Aubry, Julien and Navarro, Pablo and Ferrero, Jean-François and Marguet, Steven and Rivallant, Samuel and Lemaire, Sandrine and Rauch, Patrice Study of impact on helicopter blade. (2012) Engineering Failure Analysis, vol. 24 . pp. 38-45. ISSN 1350-6307

Lasry, Jérémie and Renard, Yves and Salaün, Michel Stress intensity factors computation for bending plates with extended finite element method. (2012) International Journal for Numerical Methods in Engineering, vol. 91 (n° 9). pp. 909-928. ISSN 0029-5981

Sanches, Leonardo and Michon, Guilhem and Berlioz, Alain and Alazard, Daniel Parametrically excited helicopter ground resonance dynamics with high blade asymmetries. (2012) Journal of Sound and Vibration, vol. 331 (n° 16). pp. 3897-3913. ISSN 0022-460X

Goueffon, Yann and Aldebert, Grégory and Mabru, Catherine and Arurault, Laurent and Tonon, Claire and Guigue, Pascale Flaking of black anodic films in space environment: Ageing and numerical simulation. (2012) Mechanics of Materials, vol. 45 . pp. 72-82. ISSN 0167-6636

Péronnet, Elodie and Eyma, Florent and Welemane, Hélène and Mistou, Sebastien Characterization and comparison of defects detection limits of ultrasonic non destructive techniques. (2012) Key Engineering Materials, vol. 498 . pp. 79-88. ISSN 1013-9826

Wang, Xuan and Pommier-Budinger, Valérie and Gourinat, Yves A Specific Methodology of Creep Compensation for piezoelectric Actuators by Open-loop control. ( In Press: 2012) In: International Conference on Mechanical Engineering, Materials and Energy (ICMEME 2012), 26-27 Oct 2012, Dalian, China.

Vieille, Benoit and Casado, Victor Manuel and Bouvet, Christophe Comparative study on the impact behavior and damage tolerance of woven carbon fiber reinforced thermoplastic– and thermosetting– composites. (2012) In: ECCM15 - 15th European conference on composite materials, 24-28 June 2012, Venice, Italy.

Senatore, Johanna and Segonds, Stéphane and Rubio, Walter and Dessein, Gilles Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones. (2012) Computer-Aided Design, vol. 44 (n° 12). pp. 1151-1160. ISSN 00104485

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad Effect of sealed anodic film on fatigue performance of 2214-T6 aluminium alloy. (2012) Surface and Coatings Technology, vol. 206 (n° 11-12). pp. 2733-2739. ISSN 0257-8972

Rahmé, Pierre and Bouvet, Christophe and Rivallant, Samuel and Fascio, Valia and Valembois, Guy Experimental investigation of impact on composite laminates with protective layers. (2012) Composites Science and Technology, 72 (2). pp. 182-189. ISSN 0266-3538

Bouvet, Christophe and Rivallant, Samuel and Barrau, Jean-Jacques Low velocity impact modeling in composite laminates capturing permanent indentation. (2012) Composites Science and Technology, vol. 72 (n° 16). pp. 1977-1988. ISSN 0266-3538

Péronnet, Elodie and Pastor, Marie-Laetitia and Huillery, Richard and Dalverny, Olivier and Mistou, Sebastien and Welemane, Hélène Non destructive investigation of defects in composite structures by three infrared thermographic techniques. (2012) In: International conference on experimental mechanics ICEM 15, 22-27 Jul 2012, Porto, Portugal. (Unpublished)

Renault, Cyril and Colin, Stéphane and Orieux, Stéphane and Cognet, Patrick and Tzedakis, Theodore Optimal design of multi-channel microreactor for uniform residence time distribution. (2012) Microsystem Technologies, vol. 18 (n° 2). pp. 209-223. ISSN 0946-7076

Njionhou, Alvine and Berthet, Florent and Castanié, Bruno and Bouvet, Christophe Relationships between LRI process parameters and impact and post-impact behaviour of stitched and unstitched NCF laminates. (2012) Applied Composite Materials, vol. 19 (n° 6). pp. 885-899. ISSN 0929-189X

Lachaud, Frédéric Multi scale analysis of composite structures behavior. (2011) [HDR]

Gourc, Etienne and Seguy, Sebastien and Arnaud, Lionel Chatter milling modeling of active magnetic bearing spindle in high-speed domain. (2011) International Journal of Machine Tools and Manufacture, vol. 51 (n° 12). pp. 928-936. ISSN 0890-6955

Gouache, Thibault and Brunskill, Christopher and Scott, Gregory and Gao, Yang and Coste, Pierre and Gourinat, Yves Regolith simulant preparation methods for hardware testing. (2011) Planetary and Space Science, vol. 58 (n° 14-15). pp. 1977-1984. ISSN 0032-0633

Cazajus, Vincent and Seguy, Sebastien and Welemane, Hélène and Karama, Moussa Residual stresses in a ceramic-metal composite. (2011) Applied Mechanics and Materials, vol. 146 . pp. 185-196. ISSN 1662-7482

Paris, Christophe. Étude et modélisation de la polymérisation dynamique de composites à matrice thermodurcissable. PhD, Institut National Polytechnique de Toulouse, 2011

Tadier, Solène and Le Bolay, Nadine and Girod Fullana, Sophie and Cazalbou, Sophie and Charvillat, Cédric and Labarrère, Michel and Boitel, Daniel and Rey, Christian and Combes, Christèle Co-grinding significance for calcium carbonate-calcium phosphate mixed cement. Part II: effect on cement properties. (2011) Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 99B (n° 2). pp. 302-312. ISSN 1552-4973

Pozzolini, Cédric and Salaün, Michel Some energy conservative schemes for vibro-impacts of a beam on rigid obstacles. (2011) ESAIM: Mathematical Modelling and Numerical Analysis, vol. 45 (n° 6). pp. 1163-1192. ISSN 0764-583X

Sanches, Leonardo and Michon, Guilhem and Berlioz, Alain and Alazard, Daniel Instability zones for isotropic and anisotropic multibladed rotor configurations. (2011) Mechanism and Machine Theory, vol. 46 (n° 8). pp. 1054-1065 . ISSN 0094-114X

Ben Slima, Khalil and Penazzi, Luc and Mabru, Catherine and Ronde-Oustau, François and Rezaï-Aria, Farhad A new method for advanced virtual design of stamping tools for automotive industry: application to nodular cast iron EN-GJS-600-3. (2011) In: The 14th International Conference on Material Forming - ESAFORM 2011, 27-29 April 2011, Belfast, UK.

Shad, Rizwan and Michon, Guilhem and Berlioz, Alain Modeling and analysis of nonlinear rotordynamics due to higher order deformations in bending. (2011) Applied Mathematical Modelling, vol. 35 (n° 5). pp. 2145-2159 . ISSN 0307-904X

Shahzad, Majid. Influence de la rugosité et des traitements d’anodisation sur la tenue en fatigue des alliages d’aluminium aéronautiques 2214 et 7050. PhD, Fracture mechanics, Institut Supérieur de l'Aéronautique et de l'Espace, 2011, 274 p.

Michel, Claire. Etude des comportements thermomécaniques et à l'oxydation de réfractaires à base de SiC et à liaison nitrurée employés dans les Unités de Valorisation Energétique d'Ordures Ménagères (U.V.E.O.M.). PhD, Institut National Polytechnique de Toulouse, 2011

Péronnet, Elodie and Eyma, Florent and Pastor, Marie-Laetitia and Welemane, Hélène Caractérisation et comparaison des limites de détection de techniques de contrôle non destructif : méthodes ultrasonores et méthodes optiques. (2011) Contrôles-Essais-Mesures, Vol. 37 . pp. 63-68. ISSN 1637-4657

Morlier, Joseph and Bettebghor, Dimitri Compressed sensing applied to modeshapes reconstruction. (2011) In: IMAC XXX Conference and exposition on structural dynamics, 30 Jan – 02 Feb 2012, Jacksonville, USA. (Unpublished)

Campa, Francisco Javier and López de Lacalle, Luis Norberto and Urbicain, Gorka and Lamikiz, Aitzol and Seguy, Sebastien and Arnaud, Lionel Critical thickness and dynamic stiffness for chatter avoidance in thin floors milling. (2011) Advanced Materials Research, vol. 188 . pp. 116-121. ISSN 1662-8985

Le Bot, Alain and Bou-Chakra, Elie and Michon, Guilhem Dissipation of vibration in rough contact. (2011) Tribology Letters, vol. 41 (n° 1). pp. 47-53. ISSN 1023-8883

Gourc, Etienne and Michon, Guilhem and Seguy, Sebastien and Berlioz, Alain Experimental investigation and theoretical analysis of a nonlinear energy sink under harmonic forcing. (2011) In: ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 28-31 August 2011, Washington, USA.

Bizeul, Matthieu and Bouvet, Christophe and Barrau, Jean-Jacques and Cuenca, Rémy Fatigue crack growth in thin notched woven glass composites under tensile loading. Part I: experimental. (2011) Composites Science and Technology, vol. 71 (n° 3). pp. 289-296. ISSN 0266-3538

Bizeul, Matthieu and Bouvet, Christophe and Barrau, Jean-Jacques and Cuenca, Rémy Fatigue crack growth in thin notched woven glass composites under tensile loading. Part II: modelling. (2011) Composites Science and Technology, vol. 71 (n° 3). pp. 297-305. ISSN 0266-3538

Israr, Haris Ahmad and Rivallant, Samuel and Zeng, Huabin and Barrau, Jean-Jacques Finite element modelling of CFRP plates under crushing. (2011) In: 18th International Conference on Composite Materials - ICCM 18 , 21-26 Aug 2011, Jeju Island, Korea.

Foucaud, Simon and Michon, Guilhem and Morlier, Joseph and Gourinat, Yves Harmonic response of the organ of corti: results for wave dispersion. (2011) In: The 11th International Mechanics of Hearing Workshop, 16–22 Jul 2011, Williamstown, USA.

Kolopp, Amélie and Rivallant, Samuel and Bouvet, Christophe Impact sur structures sandwich composites pour application de blindage aéronautique. (2011) In: JNC 17 - 17èmes Journées Nationales sur les Composites, 15-17 juin 2011, Poitiers, France.

Limido, Jérôme and Espinosa, Christine and Salaün, Michel and Mabru, Catherine and Chieragatti, Rémy and Lacome, Jean-Luc Metal cutting modelling SPH approach. (2011) International Journal of Machining and Machinability of Materials, vol. 9 (n° 3-4). pp. 177-196. ISSN 1748-5711

Morlier, Joseph and Bergh, Mauricio and Mevel, Laurent Modeshapes recognition using Fourier descriptors: a simple SHM example. (2011) In: IMAC XXX Conference and exposition on structural dynamics, 30 Jan – 02 Feb 2012, Jacksonville, USA. (Unpublished)

Arnaud, Lionel and Gonzalo, Oscar and Seguy, Sébastien and Jauregi, Haritz and Peigné, Grégoire Simulation of low rigidity part machining applied to thin-walled structures. (2011) The International Journal of Advanced Manufacturing Technology, vol. 54 (n° 5-8). pp. 479-488. ISSN 0268-3768

Seguy, Sebastien and Insperger, Tamás and Arnaud, Lionel and Dessein, Gilles and Peigné, Grégoire Suppression of period doubling chetter in high-speed milling by spindle speed variation. (2011) Machining Science and Technology, vol. 15 (n° 2). pp. 153-171. ISSN 1091-0344

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad Surface characterization and influence of anodizing process on fatigue life of Al 7050 alloy. (2011) Materials & Design, vol. 32 (n° 6). pp. 3328-3335 . ISSN 0261-3069

Ledru, Yohann and Bernhart, Gérard and Piquet, Robert and Schmidt, Fabrice and Michel, Laurent Coupled visco-mechanical and diffusion void growth modelling during composite curing. (2010) Composites Science and Technology, vol. 70 (n° 15). pp. 2139-2145. ISSN 0266-3538

Goueffon, Yann and Mabru, Catherine and Labarrère, Michel and Arurault, Laurent and Tonon, Claire and Guigue, Pascale Investigations into the coefficient of thermal expansion of porous films prepared on AA7175 T7351 by anodizing in sulphuric acid electrolyte. (2010) Surface and Coatings Technology, vol. 205 (n° 7). pp. 2643-2648. ISSN 0257-8972

Sniezewski, Julien and LeMaoult, Yannick and Lours, Philippe and Pin, Lisa and Menvie Bekale, Vincent and Monceau, Daniel and Oquab, Djar and Fenech, Justine and Ansart, Florence and Bonino, Jean-Pierre Sol–gel thermal barrier coatings: Optimization of the manufacturing route and durability under cyclic oxidation. (2010) Surface and Coatings Technology, vol. 205 (n° 5). pp. 1256-1251. ISSN 0257-8972

Ilyas, Muhammad. Damage modeling of carbon epoxy laminated composites submitted to impact loading. PhD, Génie Mécanique, Institut Supérieur de l'Aéronautique et de l'Espace, 2010, 241 p.

Seguy, Sebastien and Insperger, Tamás and Arnaud, Lionel and Dessein, Gilles and Peigné, Grégoire On the stability of high-speed milling with spindle speed variation. (2010) The International Journal of Advanced Manufacturing Technology, vol. 48 (n° 9-12). pp. 883-895. ISSN 0268-3768

Chaussumier, Michel and Shahzad, Majid and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad A fatigue multi-site cracks model using coalescence, short and long crack growth laws, for anodized aluminum alloys. (2010) Procedia Engineering, vol. 2 (n° 1). pp. 995-1004. ISSN 1877-7058

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad Influence of anodizing process on fatigue life of a machined aluminium alloy. (2010) Procedia Engineering, vol. 2 (n° 1). pp. 1015-1024. ISSN 1877-7058

Weiss, Ambrosius and Trabelsi, Walid and Michel, Laurent and Barrau, Jean-Jacques and Mahdi, Stephane Influence of ply-drop location on the fatigue behaviour of tapered composites laminates. (2010) Procedia Engineering, vol. 2 (n° 1). pp. 1105-1114. ISSN 1877-7058

Shah, Masood and Mabru, Catherine and Rezaï-Aria, Farhad Investigation of crack propagation in X38CrMoV5 (AISI H11) tool steel at elevated temperatures. (2010) Procedia Engineering, vol. 2 (n° 1). pp. 2045-2054. ISSN 1877-7058

Gouache, Thibault and Gao, Yang and Gourinat, Yves and Coste, Pierre Wood wasp inspired space and earth drill. (2010) In: Biomimetics Learning from Nature. InTech - Open Access Publisher, Rijeka, Croatia, pp. 467-486. ISBN 9789533070254

Goueffon, Yann and Mabru, Catherine and Labarrère, Michel and Arurault, Laurent and Tonon, Claire and Guigue, Pascale Mechanical behaviour of black anodic films on 7175 aluminium alloy for space applications. (2010) Metal Finishing, vol. 108 (n° 2). pp. 22-27. ISSN 0026-0576

Marger, Thibaut and Pommier-Budinger, Valérie and Maré, J-Charles and Malburet, François Designing redundant metering valves for hydraulic actuators under mixability and low cost-constraints. (2010) In: 10th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference, 13-15 Sept 2010, Fort Worth, United States.

Chieragatti, Rémy and Espinosa, Christine and Lacome, Jean-Luc and Limido, Jérôme and Mabru, Catherine and Salaün, Michel Détermination d’un Kt local associé à la rugosité de surface ; influence sur la tenue en fatigue. (2010) In: 29èmes journées de printemps de la SF2M "Influence des procédés sur la tenue en fatigue, rôle des défauts", 19-20 May 2010, Paris.

Trabelsi, Walid and Michel, Laurent and Othomene, Renaud Effects of stitching on delamination of satin weave carbon-epoxy laminates under mode I, mode II and mixed-mode I/II loadings. (2010) Applied Composite Materials, vol. 17 (n° 6). pp. 575-595. ISSN 0929-189X

Weiss, Ambrosius and Trabelsi, Walid and Michel, Laurent and Barrau, Jean-Jacques and Mahdi, Stephane Influence of ply-drop location on the fatigue behaviour of tapered composites laminates. (2010) In: 10th International Fatigue Congress, 06-11 June 2010, Prague, Czech Republik.

Duong, Anh Vu and Rivallant, Samuel and Barrau, Jean-Jacques and Petiot, Caroline and Malherbe, Benoît Influence of speed on the crushing behavior of composite plates. (2010) In: ACCM 7 – 7th Asian-Australasian Conference on Composite Materials, 15-18 Nov 2010, Taipei, Taiwan.

Shahzad, Majid and Chaussumier, Michel and Chieragatti, Rémy and Mabru, Catherine and Rezaï-Aria, Farhad Influence of surface treatments on fatigue life of Al 7010 alloy. (2010) Journal of Materials Processing Technology, vol. 210 (n° 13). pp. 1821-1826. ISSN 0924-0136

Bizeul, Matthieu and Bouvet, Christophe and Barrau, Jean-Jacques and Cuenca, Rémy Influence of woven ply degradation on fatigue crack growth in thin notched composites under tensile loading. (2010) International Journal of Fatigue, vol. 32 (n° 1). pp. 60-65. ISSN 0142-1123

Sanches, Leonardo and Michon, Guilhem and Berlioz, Alain and Alazard, Daniel Instability zones for isotropic and anisotropic multiblades rotor configurations. (2010) In: 17ème conférence Vibrations, Chocs et Bruits 2010, 15-17 Juin 2010, Ecully, France. (Unpublished)

Sanches, Leonardo and Michon, Guilhem and Berlioz, Alain and Alazard, Daniel Instability zones identification in multiblade rotor dynamics. (2010) In: 11th Pan-American Congress of Applied Mechanics, 04-08 Jan 2010, Foz do Iguaçu, Brazil.

Rahmé, Pierre and Bouvet, Christophe and Rivallant, Samuel and Fascio, Valia and Valembois, Guy Mechanical protection for composite structures submitted to low energy impact. (2010) In: ECCM14 - 14th European Conference on Composite Materials, 07-10 June 2010, Budapest, Hungary.

Bouvet, Christophe and Rivallant, Samuel and Barrau, Jean-Jacques Modelling of impact damage and permanent indentation on laminate composite plate. (2010) In: ECCM14 - 14th European Conference on Composite Materials, 07-10 June 2010, Budapest, Hungary.

Chaussumier, Michel and Shahzad, Majid and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad Modélisation de la multi-fissuration d’un alliage d’aluminium 7010 traité par oxydation anodique chromique. (2010) In: 29èmes journées de Printemps de la SF2M, "Influence des procédés sur la tenue en fatigue, rôle des défauts", 19-20 May 2010, Paris.

Weiss, Ambrosius and Michel, Laurent and Mahdi, Stephane and Cross, Estelle and Barrau, Jean-Jacques Influence of ply-drop position in thickness direction on static and fatigue loading behaviour of carbonepoxy laminates. (2009) In: 17th International Conference on Composite Materials (ICCM-17), 27-31 Jul 2009, Edinburgh, United Kingdom.

Mezeix, Laurent and Bouvet, Christophe and Huez, Julitte and Poquillon, Dominique Mechanical behavior of entangled fibers and entangled cross-linked fibers during compression. (2009) Journal of Materials Science, vol. 44 (n° 14). pp. 3652-3661. ISSN 0022-2461

Mezeix, Laurent and Bouvet, Christophe and Crézé, Serge and Poquillon, Dominique Fibers networks as a new type of core material. Processing and mechanical properties. (2009) In: Materials Research Society (MRS) 2009, 13-17 Apr 2009, San Francisco, United States.

Toral Vasquez, Javier. Identification et modélisation du comportement des structures composites assemblées par cloutage. PhD, Institut Supérieur de l'Aéronautique et de l'Espace, 2009, 267 p.

Michon, Guilhem and Berlioz, Alain and Lamarque, Claude-Henri A parametrically excited oscillator involving coupling between inclined cable system and deck of stayed bridges. (2009) In: Experimental Vibration Analysis for Civil Engineering Structures, 14-16 Oct 2009, Wroclaw, Poland. (Unpublished)

Weiss, Ambrosius and Michel, Laurent and Mahdi, Stephane and Cross , Estelle and Barrau, Jean-Jacques Influence de la position dans l’épaisseur des reprises de plis sur le comportement statique et en fatigue pour un stratifié carbone/époxy + Influence of ply-drop position in thickness direction on static and fatigue loading behaviour of carbon fibre/ epoxy laminates. (2009) In: JNC16 - 16èmes Journées Nationales sur les Composites, 10-12 Jun 2009, Toulouse, France. (Unpublished)

Chaussumier, Michel and Shahzad, Majid and Mabru, Catherine and Chieragatti, Rémy and Rezaï-Aria, Farhad Influence du décapage sur la tenue en fatigue de l'alliage Al7010-T7451 traité par oxydation anodique chromique. (2009) In: CFM 2009 19ème Congrès Français de Mécanique, 24-28 Aug 2009, Marseille, France.

Bouvet, Christophe and Castanié, Bruno and Bizeul, Matthieu and Barrau, Jean-Jacques Low velocity impact modelling in laminate composite panels with discrete interface elements. (2009) International Journal of Solids and Structures, vol. 46 (n° 14-15). pp. 2809-2821. ISSN 0020-7683

Ledru, Yohann and Piquet, Robert and Michel, Laurent and Schmidt, Fabrice and Bernhart, Gérard Quantification 2-D et 3-D de la porosité par analyse d’images dans les matériaux composites stratifiés aéronautiques = 2-D and 3-D void quantification with image analyses in aeronautic composite laminates. (2009) In: JNC16 - 16èmes Journées Nationales sur les Composites, 10-12 Jun 2009, Toulouse, France. (Unpublished)

Castanié, Bruno and Aminanda, Yulfian and Bouvet, Christophe and Barrau, Jean-Jacques Core crush criterion to determine the strength of sandwich composite structures subjected to compression after impact. (2008) Composite Structures, vol. 8 (n° 1-3). pp. 243-250. ISSN 0263-8223

Castanié, Bruno and Bouvet, Christophe and Aminanda, Yulfian and Barrau, Jean-Jacques and Thévenet, Pascal Modelling of low-energy/low-velocity impact on Nomex honeycomb sandwich structures with metallic skins. (2008) International Journal of Impact Engineering, vol. 3 (n° 7). pp. 620-634. ISSN 0734-743X

Michon, Guilhem and Berlioz, Alain and Lamarque, Claude-Henri Couplings in parametrically excited inclined cables systems. (2008) In: 12th Conference on Nonlinear Vibrations, 01-05 Jun 2008, VirginiaTech, United States. (Unpublished)

Petit, Sandrine and Bouvet, Christophe and Bergerot, Alain and Barrau, Jean-Jacques Impact and compression after impact experimental study of a composite laminate with a cork thermal shield. (2007) Composites Science and Technology, vol. 6 (n° 15-). pp. 3286-3299 . ISSN 0266-3538

Limido, Jérôme and Espinosa, Christine and Salaün, Michel and Mabru, Catherine and Chieragatti, Rémy High speed machining modelling : SPH method capabilities. (2007) In: 4th Smoothed Particle Hydrodynamics European Research Interest Community (SPHERIC) workshop, 27-29 May 2009, Nantes, France.

Prombut, P and Michel, Laurent and Barrau, Jean-Jacques Mixed-mode delamination of multidirectional composite laminates at 0°/θ° ply interfaces. (2006) In: 12th European Conference on Composite Materials, 29 Aug - 01 Sep 2006, Biarritz, France.

Carpentier, Alban and Michel, Laurent and Grihon, Stéphane and Barrau, Jean-Jacques Optimization methodology of composite panels. (2006) In: 12th European Conference on Composite Materials (ECCM 12), 29 Aug - 01 Sep 2006, Biarritz, France.

Carpentier, Alban and Michel, Laurent and Grihon , Stéphane and Barrau, Jean-Jacques Buckling optimization of composite panels via lay-up tables. (2006) In: III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering, 05-09 Jun 2006, Lisbon, Portugal.

Didierjean, Sébastien and Michel, Laurent and Barrau, Jean-Jacques and Paroissien, Eric Predicting the behavior of graphite/epoxy laminates under hydrothermal loads. (2003) In: EUROMECH 453 Internal Stresses in Polymer Composite Processing and Service Life, 01-03 Dec 2003, Saint-Etienne, France.

Gourinat, Yves Exercices et problèmes de mécanique des solides et des structures. Applications aéronautiques et aérospatiales. (2001) (Collection Sciences Sup ). Dunod, Paris, France. ISBN 9782100567003

Gourinat, Yves and Salem , Amgad L’amortissement dynamique non-destructif au sein des matériaux structuraux. (2001) Sciences, vol. 3 . pp. 57-65. ISSN 0151-0304

Castanié, Bruno. Contribution à l'étude des structures sandwichs dissymétriques. PhD, Ecole Nationale Supérieure de l'Aéronautique et de l'Espace, 2000, 208 p.

Lachaud, Frédéric. Délaminage de matériaux composites à fibres de carbone et à matrices organiques : étude numérique et expérimentale, suivi par émission acoustique. PhD, Génie Mécanique, Institut Superieur de l'Aéronautique et de l'Espace, 1997